The driver's door window, memory seat function (lights on switches are not working) and door NFC (dead fob battery acces) is not working for some time.
I replaced the switch assambly from a wrecked car and it does the same. Removed the door pannel and everything looks good, disconected every module (mirror, locking, nfc, memory seat buttons) and still doesnt want to work. Verified fuses.
If i disconnect plugs on the door the tester sees it so they are working, inspected plugs on door-pillar. Tryed to move/stretch wires wile i press the window button.
Window is not rolling up when i hold the lock on the fob and from tester functions.
Yersterday i hit a pothole on the right-side and everything started working but in my dumbness i treated like everything is solved, now i'm stuck with the window 3/4 rolled down. (E46 flashbacks). Hit other potholes but it's not working anymore.
I get those errors on a Launch tester:
030035: Power Window Regulator, Driver's Side: Missing LIN Slave
D90C00: LIN Master FAT_LIN: Short Circuit
D90C01: LIN Master FAT_LIN: No Communication
D90D52: NFC Reader Outside TAGE FAT: Missing
D90D71: Switch Block, Seat Function Driver's Door (LIN): Missing LIN Components Or No Communicatio Possible
I've seen some other posts about random modules affecting the driver's window. (boot contactless harness, usb charger)
Any tips on what to check next? I want to inspect the memory seats module located under the passager seat (if i'm right). I don't want to accept that is a defective module because it's not explaining why it was working after i hit the pothole.
