Quote:
Originally Posted by X6M50i
Quote:
Originally Posted by wjmb
I'm also having a hard time with the garage door programming. I have a rolling code style system- followed the directions in the manual and a few youtube videos which basically are the same drill of clearing the codes and putting my opener in learn mode then hitting one of the mirror buttons three times. No luck at all and for whatever reason everytime I try it my garage door remotes are getting wiped and I have to reprogram them. What gives? I did the same method on my now long gone MDX and it worked fine.
|
For rolling code system, hold the button on the remote, close to the mirror then hold the button you want to be programmed. when the light blinks, run to the garbage opener and press learn, then run back to your car and just hold the button you wanted to program again for 5 seconds then release, then hold again, until it's working, and you'll know it's work, usually the second "hold" will set up the link. It'll take you literately 1 min or less to do this, hopefully this will work for you |
All, thanks for the replies and help; the manual should be clarified as it sort of has that procedure but it's disjointed.
This forum is good stuff...