Quote:
Originally Posted by Trojanlaw
After you have removed 5AP, do the following:
(1) Go back to Expert Mode
(2) Click on Coding
(3) Click "Read ECU"
(4) Right Click on the ECU titled BDC_Body3 and select "Code". You need to right click on the master folder, not the CAFD file underneath you select when selecting for FDL coding.
(5) Do the same procedure for KAFAS, HU_MGU and both FLM ECUs.
Please note this will remove any coding you have done previously in these files. You will have to redo any FDL coding you like in those modules after you complete this procedure.
As far as having written the FA to your car, you can add 5AP back through the same procedure you followed. Make you you wait to add 5AP back AFTER you have done the above. DO NOT code the ECUs again after you do and everything should be fine.
|
Thanks Trojanlaw, understood. When I get into BDC_Body3, KAFAS, HU_MGU and both FLM ECU what values am I changing? Or what am I supposed to change within those ECUs?
Sorry, I cannot find after searching what to actually do when I get into those files.