Quote:
Originally Posted by Makefish
I'm hoping someone can help me with the install of the speaker covers, I'm not quite sure how much of the plastic rivet requires removing i.e. can you get away with drilling the middle or does it require something more drastic?
I've circled in white an example rivet so can anyone pass on some advice as to what size drill bit is needed or a suggestion on another tool or method?
Any info on this process would really help as I'm concerned about making an expecnsive mistake!
Thanks in advance.
|
You don't need to remove what circled in white, you need to drill out about 8 rivets, also I found its easer to remove light strip assembly and small decorative piece just next to the speaker together.
So basically you unscrew about 6 screws and undo about 8 rivets and assembly will come off.
Hope this helps
p.s. don't be too afraid if you drill out extra rivet, not huge deal, just don't go too hard drilling