Quote:
Originally Posted by SocietyDisillusioned
For the Pigtail to plug in to the tow harness like OEM if you prefer to make it you'll need these:
Tessa Tape( Friction tape matches BMWs)
These are the round pins:
8x of part # 61131376202KT
To remove the round pins you'll need this tool:
BMW-83300495676
And this connector:
61138352322
OR
1378118 (Same as above)
Around$100-200 for parts depending on your area for shipping and cost wires etc. At least for those wanting to do it themselves now have that option with this information as I researched for a while to make this happen. I can always make the entire pigtail for $200+ shipping wrapped like mine so it'll be more plug and play as well. Just PM me. Let me know if y'all have any questions as I'll do my best to help out!
|
Hi,
I sent you a PM not sure if it has been sent since it is a new account to me.
I have a 2021 X5 without the 8SL option. Please do let me know the cost for your wiring harness and lead time. Also some advise on how to fish the lines through the rubber hose at the tail gate.
I have an E60 and I have ISTA and INPA. Not sure if it can read the G05. Please advice on what software and cables I need in order to communicate with the car?
Thank you!
