Quote:
Originally Posted by SmartSaves
Sharing my feedback if someone follow this thread. I ran two wires through D pillar and inside the roofliner (same as the OP's video), but neglected to wrap/insulate the cables with Tesa tape. These two cables are now creating intermittent reverberating rattling noise when I drive on some uneven surfaces. I hear cable vibration noise if I slightly tap/punch the roofliner between D and C pillar. I'll need to re-do the wiring and zip tie those as much as possible; learn from my mistake 🙈
|
Could you recommend any hardwire kits that has built in low voltage cut off that can fit directly on the fuse box? Turns out the set I have has hard-wired larger fuse that makes it unusable and I don't want to cut/reconnect anything