[LexxM3]

Originally Posted by mandomedic122

I have esys up and running and have coded some stuff in my X5 G05, can you send me the ECU and coding to remove the 5AP, or do you just remove it from the VO

Here are the basics:

• read FA, edit FA
• remove option 5AP, save FA
• read SVT
• code BDC_BODY3, HU_MGU, FLM2 [43], FLM2 [44], KAFAS4

A couple of notes:

• above procedure will return the ECUs above to their stock (as shipped) state; so if you have FDL coded anything, in those specific ECUs, that will be reset back to stock
• 'code' above is right click the ECU and select Code; this is not, in this case, 'code NCD'
• to activate, make sure you're in auto lighting mode and High Beam Assistant mode (lower button on the lighting stalk)
• REMINDER: don't forget to be in Diagnostic Mode in the car when coding