Quote:
Originally Posted by Supraman66
Quote:
Originally Posted by vinnymac
Thank you everyone for the input.
I was able to complete my rear brake pad install yesterday without issues.
Using needle nose pliers to push and turn the rear caliper pistons back down worked fine. I also followed the procedures in the TIS link and activated the parking brake after the new pads were installed and prior to engaging the brake pedal. No error codes.
Thanks again everyone.
|
Great news Vinny! Did you do your front calipers too? Maybe the parking brake is the solution to those pads too!
|
Yes. The front pads were very easy. Pretty standard Brembo calipers.
Pop out two retaining pins, remove the old pads and drop in the new pads. It took me longer to take the wheel off and then put it back on.