Quote:
Originally Posted by paulrr
Hate to take away from this thread, but given that these bimmerlights are hard to come by anyways, there seems to finally have been a fix found for this issue using Bimmercode.
See post in this thread by imdiekeb.
Here are his instructions which also worked for me:
Using BimmerCode, I made the following code changes with very acceptable results:
Headunit - 3005 APIX_CID_UND_ZIN - DIM_CURVE_X2 – change values to 0x00, 0x00 (from 0x1F, 0xC0)
Instrument cluster - 3000 Anzeige_Konfiguration – DIM_TAG_NACHT_LICHT_EIN_ENABLE – change value to aktiv
Instrument cluster - 3005 FuBi_Parameter – DIM_DTN – change value to 0x7F (from 0x3F)
After programming the codes above, go to Car/Settings/Displays/Control display and change the “Brightness at night” to it’s lowest value. Then use the standard I.P. scroll wheel to set a comfortable light level in darkness. |
Yeah that’s on me for not having much time.
To make sure there isn’t misinformation can you explain more what effect the BimmerCode changes are doing? Is it disabling the auto dim? As that’s the core issue.