Last post..... So here's what you need:
1) 2x hardened poly exhaust hangers, with a 35-38mm distance between holes, and 10.5mm holes.
2) 4x exhaust tips
Inlet ID 60mm or 2.36 inches (exactly)
Oulet OD 79mm or 3.1 inches (max)
Overall length 5.5 to 7 inches
3) A welder
4) Patience.
Good luck. Thanks for reading.
Last edited by Ninefourteener; 07-04-2020 at 09:48 AM..
|