Quote:
Originally Posted by ifr
Yes, I didn't think that would work.
It could be worth a try with the VIP codes. Others have not needed them, but the land masks may be more relevant to an AUSY car.
Also double check that STECKENVERLAUF is set correctly in BDC and HU_MGU, and all landmasks reference FFFFFFFF.
Try these additional codes at your own risk. Can you let me know which you already have set, and which you had to change pls?
SAS
-----
C_SLA_Vorausschau_Auspraegung - NR001_ACC
C_VZA_Funktion_Land_aktiv 0xFFFFFFFF
C_VZA_Funktion NR001_aktivert
HU_MGU
----------
VORAUSSCHAU gen_1
GUIDING_VORAUSSCHAU_SLI_ENABLE aktiv
DKOMBI
----------
HMI_HUD_VORAUSSCHAU_ENABLE: aktiv
HMI_KI_VORAUSSCHAU_ENABLE: aktiv
LDM_VORAUSSCHAU_ENABLE: aktiv
LDM_VORAUSSCHAU_SLI_ENABLE: aktiv
PIA_HUD_VZA: aktiv
PIA_HUD_VZA_PORTIERUNG: aktiv
PIA_KI_VZA: aktiv
PIA_KI_VZA_PORTIERUNG: aktiv
VZA_ENABLE: aktiv
BDC_BODY [7083]
---------------------
VORAUSSCHAU: aktiv
|
Thanks a ton!! Still no luck even after enabling all the crossed out settings in the cheat sheet, there is something I am doing wrong. Someone has already done it in Aus so I am sure it can be done
Overall SLA is working fine without any issues only option I don't get is 'Adjust to route' setting.
My settings below
BDC/7083
AUTOMATISCH - aktive
STRECKEN_VERLAUF - aktive
VORAUSSCHAU - aktive
VOFFSET_LANGSAM - gen_1
VOFFSET- gen_1
HU_MGU/3E52
SLAAUTOMATISCH - gen_1
STRECKENVERLAUF - gen_1
VORAUSSCHAU - gen_1
VOFFSET - gen_1
VOFFSET_LANGSAM - gen_1
SAS2/42C1
C_SLA_Anzeige_Zusatztexte - Nr001_aktiviert
C_SLA_aSLA_Land_Aktiv - 0xFFFFFFFF
C_SLA_Vorausschau_Land_Aktiv - 0xFFFFFFFF
C_SLA_Streckenregelung_Land_Aktiv - 0xFFFFFFFF
C_SLA_Streckenregelung_vorhanden - NR_002_vorhanden_SLA_entkoppelt
C_SLA_aSLA_vorhanden - Nr001_vorhanden
SLA is working fine even without below set of settings except for 'Adjust to route' option
DSC_VIP/3D14
C_SLA_Anzeige_Zusatztexte - Nr001_aktiviert
C_SLA_aSLA_vorhanden - Nr001_vorhanden
C_SLA_aSLA_Land_Aktiv - 0xFFFFFFFF
C_SLA_Vorausschau_Land_Aktiv - 0xFFFFFFFF
C_SLA_Streckenregelung_vorhanden - NR_002_vorhanden_SLA_entkoppelt
C_SLA_Streckenregelung_Land_Aktiv - 0xFFFFFFFF
Some additional settings as suggested
SAS2/42C1
C_SLA_Vorausschau_Auspraegung - NR001_ACC (factory, no change)
C_VZA_Funktion_Land_aktiv - 0xFFFFFFFF
C_VZA_Funktion NR001_aktivert - NR001_aktivert (factory, no change)
HU_MGU/3E52
VORAUSSCHAU - gen_1
GUIDING_VORAUSSCHAU_SLI_ENABLE - aktive (factory, no change)
DKOMBI
HMI_HUD_VORAUSSCHAU_ENABLE: aktiv (factory, no change)
HMI_KI_VORAUSSCHAU_ENABLE: aktiv (factory, no change)
LDM_VORAUSSCHAU_ENABLE: aktiv (factory, no change)
LDM_VORAUSSCHAU_SLI_ENABLE: aktiv (factory, no change)
PIA_HUD_VZA: aktiv (factory, no change)
PIA_HUD_VZA_PORTIERUNG: aktiv (factory, no change)
PIA_KI_VZA: aktiv (factory, no change)
PIA_KI_VZA_PORTIERUNG: aktiv (factory, no change)
VZA_ENABLE: aktiv (factory, no change)
Someone suggested to code
sicht_absicht in HU_MGU and BDC. I think this coding enabled 'Show Anticipation' option under Driver Assistance/Driving/Speed Assistant/Speed Limits menu.
While coding these settings I came across below in HU_MGU and BDC
SITUATIVERABSTAND - changed to aktive.
This enabled automatic distance control according to situation. I tried to test it on road but didn't notice any difference. I was expecting distance between my car and the car ahead me would adjust automatically depending on car speed instead of me manually setting it but that didn't happen so not sure if this setting is really working.
[EDIT] - When I looked at definition of 'Adjust to Route' in Driver's guide(refer second image), I realized that functionality is working as per the definition. Car does slow down at round about, turning off, bend, etc. only thing missing is the option to switch on/off this in iDrive menu.