Thanks .. will try the codes below and see if it works for US region...
Quote:
Originally Posted by ifr
I see the following codes. Some will be irrelevant so just compare and record with what you have, code the differences, and test:
[1B2D]
a_pdc: aktiv [01]
a_pdc_fp: aktiv [01]
apdc_activation: initwert [00]
apdc_generation: gen_1 [01]
auto_il: nicht aktiv [00]
auto_pdc: aktiv [01]
these codes are profile related so almost certainly not needed (my choices in idrive) :
pia_default_apdc: nicht aktiv [00]
pia_default_apdc_fp: nicht_aktiv [00]
pia_default_auto_il: aktiv [01]
pia_default_auto_pdc: aktiv [01]
[3E52]
ACTIVE_PDC: aktiv [01]
ACTIVE_PDC_FLANKENBREMSUNG: aktiv [01] - dont use this, as needs additional hardware (brakes on side too)
AUTO_PDC: aktiv [01]
PDC_FLANKENSCHUTZ: aktiv [01]
PDC_GENERATION: gen2 [01]
PDC_SENSOR_HINTEN: 4_sensoren [01]
PDC_SENSOR_VORN: 4_sensoren [01]
[430A]
AutoPdcAbstandSchwelleMS: StandardValue [64]
AutoPdcAbstandSchwelleRR: StandardValue [96]
AutoPdcAbstandSchwelleVFVR: StandardValue [3C]
AutoPdcFlanken_enable: StandardValue [00]
AutoPdc_enable: StandardValue [01]
BrakeDistIF_enable: APDC-ON [01]
ExProbThreshold_aPDC: StandardValue [66]
MRA_aPDCMonitoring: StandardValue [00]
[42C1]
C_SperraPDC: Nr001 18-07 G005_not_PHEV G015 [01]
C_Verwendung_PDC_Daten: Nr000_false [00]
C_aPDC_Applikation: Nr001_not_RearAEB [01]
C_aPDC_vorhanden: Nr001_vorhanden [01]
|