Quote:
Originally Posted by hkleyman
Quote:
Originally Posted by radmjk
Quote:
Originally Posted by hkleyman
Originally the round bump stops that the red arrow points to in the photo below were adjusted. They turn counter clockwise to extend and clockwise to retract.
The horizontal bump stops that the blue arrow points to were adjusted after this most recent (3rd) visit and are much further out (towards the arrow) after I got it back. The photo is before they were adjusted. Now they extend out further.
I think they all just hold the upper lift gate in place because there is a lot of play in the latches.
|
Thanks for the detailed photos! I will pass this along to my dealer! Hope your vehicle stays quiet!
|
Thanks. They also applied a thick lube / grease to those that the blue arrow pointed at, and to the thin rectangular "bumpers" that are on the lift gate itself and touch those stops.
|
I let dealer know about your fix and they responded:
"Hi, we have already ruled those out (bump stops)--that is not your issue. There were some bad spot welds in the body. And I cannot receive photos in this format."
So, if my spot welds were supposedly fixed what are they working on now?