Confirmed everything through a BMW tech.
The filter has the copper sealing ring (crush washer) and filter cap gasket.
11.1 quarts are required for the change.
Oil filter cap wrench part number is W11 9 240.
Torque specs are as follows...
It notes the following torque specs:
Oil filter cover to oil sump upper part:
1. Initial tightening torque 40Nm.
2. Slacken 180°.
3. Tightening torque 40Nm.
Oil drain plug on oil sump:
1. Bolt size... M18x1.5.
2. Renew the sealing ring.
3. Tightening torque 40Nm.
|