|
This was asked on the main page as well. Below is my reply on that thread:
Dimensions should be same, as most LCI models the tail light dimension are the same (G30, G07, etc). In fact, the parts are already available online for those who might want to order them, looks like total cost would be around $1200.
Driver Side Outer Light - 63215A11EC5
Passenger Side Outer Light - 63215A11EC6
Driver Side Inner (tailgate) Light - 63215A11ED1
Passenger Side Inner (tailgate) Light - 63215A11ED2
The bigger challenge is that I'm not sure if wiring diagrams for the LCI are available yet, as in the past on LCI models the wiring sometimes changes. The other concern is that there were a couple of people who tried to retrofit the LCI X7 headlights, and it was discovered that those LCI taillights actually have built-in modules which require coding. The problem there is that BMW has (for the time being) locked out certain coding on modules from newer models. So it could be that no coding would be needed, or possible that both the existing BDC and/or the new LCI taillights would require coding which may or may not be doable.
|