Quote:
Originally Posted by Xmel`
Here you go.
I modified the blue scheme
with red lower colour and red B&W all around.
But you can change whatever you want
So we need to change some parameters in RAM.
- 3004 (from 1 to 7 scheme)
- 3005 (from 8 to 11)
It almost the same as we did with other lights but the RGB code is located in 3 lines (1R,1G,1B)
So in AMBIENTE_FARBE_ENSEMBLE_6_LAYER_1_R
6 is the blue scheme that we want to change
1 is the place of the speaker (two upper front speakers)
Global it looks like that
RAM
XX_LAYER_3 - B&W (weiss)
XX_LAYER_1 - Hi (weiss/colour)
1_LAYER_(1-6) - bronz
2_LAYER_(1-6) - bronz/weiss
3_LAYER_(1-6) - orange
4_LAYER_(1-6) - orange/weiss
5_LAYER_(1-6) - weiss
6_LAYER_(1-6) - blau
7_LAYER_(1-6) - blau/weiss
8_LAYER_(1-6) - gruen
9_LAYER_(1-6) - gruen/weiss
10_LAYER_(1-6) - viol
11_LAYER_(1-6) - viol/weiss
You should on/off or reboot your i-drive after coding for modification to take place.
Good luck and share your variants
|
Thanks for this, can confirm that this works on Bowers and Wilkins systems. It even changes the color of the Bowers and Wilkins logo.