Quote:
Originally Posted by Mmilani
Quote:
Originally Posted by LexxM3
Here are the basics: - read FA, edit FA
- remove option 5AP, save FA
- read SVT
- code BDC_BODY3, HU_MGU, FLM2 [43], FLM2 [44], KAFAS4
A couple of notes: - above procedure will return the ECUs above to their stock (as shipped) state; so if you have FDL coded anything, in those specific ECUs, that will be reset back to stock
- 'code' above is right click the ECU and select Code; this is not, in this case, 'code NCD'
- to activate, make sure you're in auto lighting mode and High Beam Assistant mode (lower button on the lighting stalk)
- REMINDER: don't forget to be in Diagnostic Mode in the car when coding
|
Thank you so much. Really appreciate the simple to follow instructions. Coded the G07 yesterday and it worked perfectly.
I am so glad you mentioned that the ECUs will go back to stock settings. That saved me a lot of time and panic.
|
Glad it worked well. There is an investigation under way to determine why a US-member is failing to code anti-dazzle decode using this method. One theory is something to do with latest ISTEP. In that context, would you mind sharing your software/ISTEP version?