Anyone do the Brake Force Display change? Certain cars--under emergency braking--will blink their brake lights versus the solid display. This setting allows you to change the threshold to when that will happen (i.e., you can lower the braking force).
https://youtu.be/MWjD7Zrb6Yk
Thing is, though, according to the above video there are additional steps, but according to BimmerCode, it's just two simple settings.
Has anyone changed this with the two settings and verified it worked?
Quote:
Brake Force Display
Brake Force Display activation brake force
The brake deceleration at which the Brake Force Display is activated.
Values:
Weak braking (5 m/s˛)
Medium braking (7 m/s˛)
Hard braking (8 m/s˛)
Requirements:
“Body Domain Controller” BDC control unit
“UniCarScan“, “OBDLink” or ENET adapter
Brake Force Display activation speed
The speed at which the Brake Force Display is activated.
Values:
5 km/h
10 km/h
20 km/h
30 km/h
40 km/h
50 km/h
Requirements:
“Body Domain Controller” BDC control unit
“UniCarScan“, “OBDLink” or ENET adapter
|