Quote:
Originally Posted by Trojanlaw
Without ifr, no one in the US would have GFHB after the software updates. To save everyone time, here are the settings that differ from ECE re VLD. This includes settings not included in ifr's list.
7083 AL_MODE_ECO: LOW_LEVEL_3_DIPB[03]
7083 LIN_VARIANTE_SZL: szl_r_HW_aic_4Band_fla [30]
1DF8 C_AFS_ECO_LEVEL_3_ENA:enable
1DF8 C_AFS_ENA: enable
1DF8 C_BLC_PRE_ENA:enable
1DF8 C_CLC_BLINK_ENA: enable
1DF8 C_CLC_CURV_V2: ECE
1DF8 C_CLC_CURV_V3: ECE
1DF8 C_CLC_EXT_ENA: enable_roundabout
1DF8 C_CLC_REV_ENA: enable
1DF8 C_HBA_GFHBA_ENA_V_HI: standard
1DF8 LUT_AFS_CODRV_HOR: G05_Laser_ECE
1DF8 LUT_AFS_DRV_HOR: G05_Laser_ECE
1DF8 LUT_FLC_FORWARDLIGHTING_Y: AFS[00, 00, 00]
Just a heads up that many of these files were trimmed in 7/2020. You will need the Esysx update coming out soon to properly map.
Let me know if this works better for you all.
|
I coded anti-dazzle a few weeks back but am only now getting the chance to drive at night and use it. It definitely works but I seem to remember some discussion surrounding sensitivity coding. Have we isolated what those codes are? For example, I seem to remember somebody posting about 1) sensitivity to oncoming street signs, 2) sensitivity to ambient light and overhead street lights.
Reason I ask is mine rarely comes on when traveling on the interstate since most of the freeways in my area have updated to LED street lights over the freeway. However, when I travel highways without these new overhead street lights, it works great.
Also, too large or too many street signs will typically turn it off.
Lastly, are there other tweaks that can be made to VLD?
Thanks in advance & sorry if this is covered elsewhere...I search for quite a while and couldn't find definitive answers.