BimmerCode App just updated..

scottjays · 12-28-2019, 04:10 PM

Quote:

Originally Posted by hkleyman

Do we know if tailgate module will ever be available again? I am ready to code ADV, anti dazzle, ASS, and would love to do close trunk via fob but have been waiting to do anything in case that module comes back.

Quote:

Originally Posted by tartan43

I recently successfully tested HKFM tailgate coding with Bimmercode TestFlight (Version 3.5 10325) + ENET cable. The developer provided to validate, so hopefully we’ll see it re incorporated in the next full release.

PhatBoyG · 01-02-2020, 01:08 PM

Just to chime in, coded my G05, 2019, 50i, with DA Plus (not Pro). Using Lightning Ethernet adapter, ENET cable, and iPhone X.

Coded: ASS, Tire Temperature, and ADV (single value changed (DKOMBI\CB_FZG_UMGEBUNG_FAS: aktiv [01]), and on restart showed up in driving assistance options to check).

eagle_bmw · 01-02-2020, 01:14 PM

I had ASS set to "Not active" which disables ASS at startup (Comfort mode). However, after switching to Sports mode and back to Comfort ASS is back to active. Anybody observing the same behavior?

homerrr · 01-02-2020, 02:30 PM

Quote:

Originally Posted by eagle_bmw

I had ASS set to "Not active" which disables ASS at startup (Comfort mode). However, after switching to Sports mode and back to Comfort ASS is back to active. Anybody observing the same behavior?

For me, after coding ASS memory not active, it only selects ASS active when in ECO MODEs, and not active again when I go back to the other modes. Did you code your setting with BimmerCode or manually with esys?

kleongwins · 01-02-2020, 03:10 PM

I have ADV enabled, but it's only active when Driving Assistance is active, otherwise it displays the map. Is it possible to have ADV on by default?

eagle_bmw · 01-02-2020, 03:14 PM

Quote:

Originally Posted by homerrr

Quote:

Originally Posted by eagle_bmw

I had ASS set to "Not active" which disables ASS at startup (Comfort mode). However, after switching to Sports mode and back to Comfort ASS is back to active. Anybody observing the same behavior?

For me, after coding ASS memory not active, it only selects ASS active when in ECO MODEs, and not active again when I go back to the other modes. Did you code your setting with BimmerCode or manually with esys?

Thanks, "coded" only with BimmerCode.

homerrr · 01-02-2020, 03:15 PM

Quote:

Originally Posted by eagle_bmw

Quote:

Originally Posted by homerrr

Quote:

Originally Posted by eagle_bmw

I had ASS set to "Not active" which disables ASS at startup (Comfort mode). However, after switching to Sports mode and back to Comfort ASS is back to active. Anybody observing the same behavior?

For me, after coding ASS memory not active, it only selects ASS active when in ECO MODEs, and not active again when I go back to the other modes. Did you code your setting with BimmerCode or manually with esys?

Thanks, "coded" only with BimmerCode.

Then I would say it's odd since yours doesn't behave the way mine does...

roadkillrob · 01-02-2020, 05:19 PM

Quote:

Originally Posted by kleongwins

I have ADV enabled, but it's only active when Driving Assistance is active, otherwise it displays the map. Is it possible to have ADV on by default?

I believe in the display menu in idrive you can select always on or only when active.

This view - I think you uncheck the display when active and then if it is set to central display area as assisted driving view it will stay on all the time - had mine like that for a bit.

kleongwins · 01-03-2020, 03:43 PM

Quote:

Originally Posted by roadkillrob

I believe in the display menu in idrive you can select always on or only when active.

This view - I think you uncheck the display when active and then if it is set to central display area as assisted driving view it will stay on all the time - had mine like that for a bit.

I don't have the "Always On" option, there must be a setting I didn't make "activ" when I did BimmerCode.

roadkillrob · 01-03-2020, 05:50 PM

Quote:

Originally Posted by kleongwins

I don't have the "Always On" option, there must be a setting I didn't make "activ" when I did BimmerCode.

There is not an always on setting, if you want it on make it look like the picture but uncheck the box for Display Driver Assistance view when driver assistance is active, then it will stay on all the time I think.

buze · 01-03-2020, 06:08 PM

I have to say the ADV isn't particularly useful, I had hoped to see stuff coming in from behind/sides, but as it is, it just shows you what you can... already see. I mean it's sweet, but quite frankly the map is probably better, in the end...

LexxM3 · 01-03-2020, 06:19 PM

Quote:

Originally Posted by buze

I have to say the ADV isn't particularly useful, I had hoped to see stuff coming in from behind/sides, but as it is, it just shows you what you can... already see. I mean it's sweet, but quite frankly the map is probably better, in the end...

Strictly speaking, it does show approaching cars in your blind spot, but they show very light and poorly visible, almost "tentative", you have to really look for it. Since it clearly senses the cars there, it would be good if BMW improved that interface to make the blind spot cars much more apparent. This seems par for course for modern BMW design — fantastic tech, absolutely shitty UX and UI.

tartan43 · 01-03-2020, 07:29 PM

Quote:

Originally Posted by PhatBoyG

Just to chime in, coded my G05, 2019, 50i, with DA Plus (not Pro). Using Lightning Ethernet adapter, ENET cable, and iPhone X.

Coded: ASS, Tire Temperature, and ADV (single value changed (DKOMBI\CB_FZG_UMGEBUNG_FAS: aktiv [01]), and on restart showed up in driving assistance options to check).

Do you have the 5AS option or the 5AT option?

PhatBoyG · 01-04-2020, 08:13 AM

Quote:

Originally Posted by tartan43

Do you have the 5AS option or the 5AP option?

I have 5AU, pre-12/18 build, so it's the DA Plus, not Pro. The only difference is the extended traffic jam assist at higher speeds. And I did end up enabling the two other bits (I couldn't find the PIA_ one in Bimmercode so I wasn't able to change it).

TurtleBoy · 01-04-2020, 08:22 AM

Quote:

Originally Posted by PhatBoyG

I have 5AU, pre-12/18 build, so it's the DA Plus, not Pro. The only difference is the extended traffic jam assist at higher speeds. And I did end up enabling the two other bits (I couldn't find the PIA_ one in Bimmercode so I wasn't able to change it).

ETJA is for lower speeds, 0 - 40mph.

X54TH · 01-04-2020, 08:46 AM

Just to be clear ADV cannot be coded with the BimmerCode App, correct?

TurtleBoy · 01-04-2020, 08:52 AM

Quote:

Originally Posted by X54TH

Just to be clear ADV cannot be coded with the BimmerCode App, correct?

You can but need to do it in Expert mode.

LexxM3 · 01-04-2020, 08:52 AM

Quote:

Originally Posted by X54TH

Just to be clear ADV cannot be coded with the BimmerCode App, correct?

ADV CAN be coded with current Bimmercode.

DKOMBI ECU in Bimmercode Expert Mode:
- go into Expert Mode in KOMBI ECU
- search for each parameter (there is a search box)
- change
- Code

CB_FZG_UMGEBUNG_FAS: aktiv (01)
CB_PRESELECT_NAVI_ANSICHT_FZG_UMGEBUNG: aktiv (01)
PIA_FZG_UMGEBUNG_FAS: aktiv (01)
SICHT_ABSICHT_ENABLE: aktiv (01)

(Many report that the PIA_ parameter is missing in Bimmercode, but that it works regardless).

X54TH · 01-04-2020, 08:54 AM

Damn, OK I missed this totally. Can someone walk me through the Expert Mode steps.

LexxM3 · 01-04-2020, 08:57 AM

Quote:

Originally Posted by X54TH

Damn, OK I missed this totally. Can someone walk me through the Expert Mode steps.

Edited my post to add the FDL parameters. Go into Expert Mode in KOMBI ECU, search for each parameter (there is a search box), change, Code.

X54TH · 01-04-2020, 09:00 AM

Quote:

Originally Posted by LexxM3

Quote:

Originally Posted by X54TH

Damn, OK I missed this totally. Can someone walk me through the Expert Mode steps.

Edited my post to add the FDL parameters. Go into Expert Mode in KOMBI ECU, search for each parameter (there is a search box), change, Code.

Going out to do it now!

X54TH · 01-04-2020, 09:13 AM

Quote:

Originally Posted by LexxM3

ADV CAN be coded with current Bimmercode.

DKOMBI ECU in Bimmercode Expert Mode:
- go into Expert Mode in KOMBI ECU
- search for each parameter (there is a search box)
- change
- Code

CB_FZG_UMGEBUNG_FAS: aktiv (01)
CB_PRESELECT_NAVI_ANSICHT_FZG_UMGEBUNG: aktiv (01)
PIA_FZG_UMGEBUNG_FAS: aktiv (01)
SICHT_ABSICHT_ENABLE: aktiv (01)

(Many report that the PIA_ parameter is missing in Bimmercode, but that it works regardless).

How do you access Expert Mode again. I've seen it but i'm not finding it now.

01-02-2020, 01:08 PM	#728
PhatBoyG Second Lieutenant 212 Rep 276 Posts Drives: 2019 X5 50i Join Date: Nov 2018 Location: Tulsa, OK iTrader: (0) Garage List 2019 X5 50i M-Sport [0.00]	Just to chime in, coded my G05, 2019, 50i, with DA Plus (not Pro). Using Lightning Ethernet adapter, ENET cable, and iPhone X. Coded: ASS, Tire Temperature, and ADV (single value changed (DKOMBI\CB_FZG_UMGEBUNG_FAS: aktiv [01]), and on restart showed up in driving assistance options to check).
	Appreciate 0 Quote

01-02-2020, 01:14 PM	#729
eagle_bmw Lieutenant 183 Rep 419 Posts Drives: 2019 BMW X5 40i Join Date: May 2019 Location: USA iTrader: (0)	I had ASS set to "Not active" which disables ASS at startup (Comfort mode). However, after switching to Sports mode and back to Comfort ASS is back to active. Anybody observing the same behavior? __________________ 2019 X5 40i M-Sport 07/2020.54 -> 11/2020.50 -> 03/2021.50 -> 07/2021.85 [All OTAs]
	Appreciate 0 Quote

01-02-2020, 03:10 PM	#731
kleongwins New Member 12 Rep 28 Posts Drives: 2022 X7 MSport Join Date: Apr 2013 Location: United States iTrader: (0)	I have ADV enabled, but it's only active when Driving Assistance is active, otherwise it displays the map. Is it possible to have ADV on by default?
	Appreciate 0 Quote

01-03-2020, 06:08 PM	#737
buze Owner 132 Rep 566 Posts Drives: G05 30d M-Sport Join Date: Dec 2012 Location: Berkshire, Powys iTrader: (0) Garage List 2019 BMW X5 G05 30d ... [0.00] 1999 Z3 2.8L Roadster [0.00]	I have to say the ADV isn't particularly useful, I had hoped to see stuff coming in from behind/sides, but as it is, it just shows you what you can... already see. I mean it's sweet, but quite frankly the map is probably better, in the end... __________________ Received 190911: X5 30d M-Sport:Artic Grey:Comfort Pack:Tech Pack:Visibility Pack: Driver Assist Pro Pack:Heat Pack:Glass Roof:Leather Dash
	Appreciate 0 Quote

01-04-2020, 08:46 AM	#742
X54TH Member 893 Rep 2,029 Posts Drives: 2019 X5 40i M Sport Join Date: Feb 2011 Location: GTA iTrader: (0) Garage List 2023 BMW M2 (HEA) [10.00] 2021 330i xDrive [0.00] 2019 G05 X5 M Sport [0.00] 2017 Jeep Grand Che ... [0.00]	Just to be clear ADV cannot be coded with the BimmerCode App, correct?
	Appreciate 0 Quote

01-04-2020, 08:54 AM	#745
X54TH Member 893 Rep 2,029 Posts Drives: 2019 X5 40i M Sport Join Date: Feb 2011 Location: GTA iTrader: (0) Garage List 2023 BMW M2 (HEA) [10.00] 2021 330i xDrive [0.00] 2019 G05 X5 M Sport [0.00] 2017 Jeep Grand Che ... [0.00]	Damn, OK I missed this totally. Can someone walk me through the Expert Mode steps.
	Appreciate 0 Quote