03-21-2021, 04:17 AM | #265 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
That's why the spreadsheet states to code them and that's why I told you to code as per the spreadsheet, not cherry pick what you think might work. No idea if it will work in Singapore. You could buy esysx, code it and find it doesn't work. Your choice, but do report back the result. If you get it fully working, the idrive advice I gave 'should' disable the Drive Assist intervention part Last edited by ifr; 03-21-2021 at 04:43 AM.. |
|
Appreciate
0
|
03-21-2021, 05:25 AM | #266 | |
Second Lieutenant
29
Rep 207
Posts |
Hi,
Understand. I will try out and revert whether it will work in Singapore or not. Usually I will try to code one by one to know what actually each line of code does. Like the coding for the "Additional display" for HUD that you share to solve to display the tach display when in sport mode, i learn as i code one by one at each time and see what it does. I will indicate in my own record as per below so that i know i am doing next time if i were to do it again if the coding get erase after software upgrade. CB_HUD_FAS: aktiv [01] Driver Assistance Checkbox CB_HUD_LIST_AUS: nicht_aktiv [00] Additional Displays Menu CB_HUD_LIST_AUTOMATISCH: nicht_aktiv [00] Additional Displays - Automatic Option CB_HUD_LIST_FAS_PERMANENT: nicht_aktiv [00] Additional Displays - Driver assistant Option CB_HUD_LIST_SPORT_PERMANENT: aktiv [01] Additional Displays - Sport displays Option CB_HUD_LIST_SPORT_AUS: aktiv [01] Sport Displays Menu CB_HUD_LIST_SPORT_FES: aktiv [01] Sport Displays Menu - Display in Sports Quote:
|
|
Appreciate
0
|
03-21-2021, 05:40 AM | #267 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
I spent a lot of time working out the interdependencies between all the systems, while also unblocking the region locks. You can't expect help if you ignore the advice and choose to do your own thing, then come back and ask for further help without revealing you ignored the original advice. it's a waste of your time and more importantly my time and pees me off. |
|
Appreciate
2
volodp199.50 AtticusHoy42.50 |
03-21-2021, 05:45 AM | #268 | |
Second Lieutenant
29
Rep 207
Posts |
Hi,
I appreciate for your time. Sorry about that and i will take your advise and try out. Will revert and contribute after trying. Quote:
|
|
Appreciate
1
ifr1201.50 |
03-21-2021, 08:30 AM | #269 |
Second Lieutenant
29
Rep 207
Posts |
Hi,
I had code all and now Speed limit will be accepted automatically where possible, no more without anticipation. But i got 2 thing that i am unable to code. C_SLA_UCC_Land_aktiv and C_SLA_aUCC_Land_aktiv There is no option for me to change to FFFFFFFF. |
Appreciate
0
|
03-21-2021, 08:36 AM | #270 |
Major
561
Rep 1,181
Posts |
You need to change Werte to FF, FF, FF, FF. It’s a manual edit not a drop down.
|
Appreciate
0
|
03-21-2021, 08:42 AM | #271 |
Second Lieutenant
29
Rep 207
Posts |
|
Appreciate
0
|
03-21-2021, 08:53 AM | #272 |
Major
561
Rep 1,181
Posts |
|
Appreciate
0
|
03-21-2021, 08:58 AM | #273 | |
Second Lieutenant
43
Rep 242
Posts |
Quote:
Then click on the little button on the right side for save |
|
Appreciate
0
|
03-21-2021, 09:01 AM | #274 |
Second Lieutenant
29
Rep 207
Posts |
|
Appreciate
0
|
03-21-2021, 08:38 PM | #275 |
Enlisted Member
8
Rep 44
Posts |
Just wondering has anyone in Canada been able to get the stopping at Traffic light function to work?
I was able to code everything successfully thanks to the chart/excel file from ifr, however, for some reason the car hasn't stopped at the Red light. I also enabled "Automatically adjust speed" in iDrive. Upon testing, it seems to detect the Red light and I click set, however, it doesn't apply the brakes. As I got even closer to the traffic light, it started to slow down, but if I let it go further it would be in the middle of the intersection. (Sort of defeats the point) I just got OTA 11/2020.50 and coded it this evening. Any ideas? |
Appreciate
0
|
03-21-2021, 11:07 PM | #277 | |
Second Lieutenant
29
Rep 207
Posts |
Hi,
Can check, how did u resolve “Function not available in this country.”? Quote:
|
|
Appreciate
0
|
03-22-2021, 03:15 AM | #278 |
Lieutenant Colonel
1202
Rep 1,587
Posts |
All,
This is the state of TLA world-wide. It has only been officially released in a handful of markets, for MY21, and even those where it has been released, it appears there are some restrictions. If you follow my coding exactly and meet the pre-reqs, one of the following scenarios is possible:
While I am seeing improvements to the system with each i-step release, the land mask for UCC has not changed since 07/2020. This means BMW have not changed the regions that are supported for Urban Cruise Control (UCC) which underpins TLA. Probably because the system is not fully baked in the regions it is supported yet. They may also have moved dev onto the SP21 vehicles. Hopefully the development for the system is supported on both platforms, but we will see. It seems that aSLA is a dependency for the system, and the 'Consider Traffic Lights' option is in the same idrive menu area. Regions that do not natively allow aSLA, like North America, do not meet that dependency without coding. In summary, it's complicated. Last edited by ifr; 03-22-2021 at 04:45 AM.. |
Appreciate
4
|
03-22-2021, 06:03 AM | #279 | |
Second Lieutenant
29
Rep 207
Posts |
Hi,
Can i check, after i change C_SLA_UCC_Land_aktiv and C_SLA_aUCC_Land_aktiv to FF, FF, FF, FF, the Ausgelesen become "UNKNOWN". Is it suppose to be like that? Quote:
|
|
Appreciate
0
|
03-22-2021, 07:03 AM | #280 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
The only other possibility is that there is another dependant system that is geo restricted. You could change ALL 'land' masks to FF, FF, FF, FF in SAS3 and VIP. That would ensure that all supported features are active for your model and region for SLA and all sub-systems such as TLA, UCC, aSLA, etc |
|
Appreciate
0
|
03-22-2021, 08:01 AM | #281 | |
Second Lieutenant
29
Rep 207
Posts |
Hi,
My DSC_VIP do not have 3D14. It have 3D78. I also cannot find C_SLA_Vorausschua_Land_Altiv. It have C_SLA_Vorausschua_Land_Altiv_Erweitert instead. Is 3D14 & 3D78 the same? Quote:
|
|
Appreciate
0
|
03-22-2021, 08:08 AM | #282 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
if you find any land masks are set to 00, 00, 00, 00 then ignore these. |
|
Appreciate
0
|
03-22-2021, 09:04 AM | #283 |
Second Lieutenant
29
Rep 207
Posts |
|
Appreciate
0
|
03-22-2021, 09:21 AM | #284 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
That's it - you are looking at VIP, you just have a different model. I fear there will be more and more questions. I'll leave others to answer them. Last edited by ifr; 03-22-2021 at 09:26 AM.. |
|
Appreciate
0
|
03-22-2021, 09:27 AM | #285 | |
Second Lieutenant
29
Rep 207
Posts |
Hi,
Haha, no more question. Thank you. Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|