|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
06-20-2021, 10:31 AM | #1 |
Private
5
Rep 50
Posts |
Custom Seats
So when I bought my E85, it had a set of cheap custom seats. I don't mind them, but there is a problem. They are very basic, and do not allow for the passengers airbag to be used. Not to much of a problem, as I rarely have passengers.But on those occasions, I would like it to work.
What I want to know is there a set of wires on the harness I can bridge, to fool it that there is someone in the seat. I tried turning it off and on in the door jam, and using my bi-directional scanner, but I think it needs input from the seat. I just don't wanna start back probing and jumping random wires in the harness. I know it will be on all the time until I shut it off in the door jam. Anyone know which wire/s have the signal? |
06-20-2021, 02:16 PM | #2 |
Lieutenant
571
Rep 566
Posts |
Are you referring to the passenger occupancy sensor in the seat? There are emulators out there that plug in or you can get a sensor/steal one out of a stock seat. I picked a sensor up to put under the seat cushion for my sparco evo for my passenger seat. I can’t remember so double check but if the occupancy sensor isn’t present I think the system is always active, but double check on that.
Last edited by Piper1; 06-20-2021 at 02:31 PM.. |
Appreciate
0
|
06-21-2021, 07:23 PM | #3 |
Private
5
Rep 50
Posts |
I really didn't think to see if they sold an aftermarket thing like that.... I will look into it. But it is off. Lights say off, and my scanner is saying it is off. Even after I turn it on by the door jam. So I will look for either a used sensor or emulator. Thanks.
Oh, and I assume this would probably be the same for ALL BMW's for at least 03-04. If not, at least the 3 series. |
Appreciate
0
|
06-21-2021, 09:02 PM | #4 | |
Lieutenant
571
Rep 566
Posts |
Quote:
Which ever emulator you get make sure you check the harness plug to make sure it matches. If I remember right 06+ has a different connection. The purpose of the emulator it fools the ecu to think there’s always a passenger so it’s on all the time. If also after all this what ever you get and they happen not to work might be worth checking that the switch by the door jam for on off with key is working right and turning it “on” correct. |
|
Appreciate
0
|
06-23-2021, 04:18 PM | #5 |
Private
5
Rep 50
Posts |
I should have time this weekend to check it. cars been sitting at work for the past few days, as I have a company truck for a bit. I will try the switch by the door jam first. If I remember where it is, I think you access it from under the glove box. Hope its not as bad as changing fuses(just a complaint from a chunky guy trying to contort my body).
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|