Coding M Logo, M Font and Car Color/Trim Line

B530e · 02-15-2021, 01:01 PM

Hey Guys,

I have a 2021 X5 sDrive 40i (xline, Arctic Grey). When I purchased it, the car in the Instrument Cluster and Navigation screen was Jatoba Brown however I know it should match the color of my car. I went in and coded the proper color and changed the vehicle from xLine to Msport. I also changed the cluster to M Font from standard and that allowed me to add the M logo and other logos that are ordinary unavailable with stock cluster. Before and after photos are below with coding instructions. Enjoy. Also tested this on my 2020 5 Series and was successful.

M Font and Logo

-DKombi4
-Expert Mode
-3001 KI_Parameter
-AG_MPA_MSP_VIEW

MPA_ANSICHT_260_SKALA (160 MPH Speedo, M Font)
MPA_ANSICHT_330_SKALA (200 MPH Speedo, M Font)
MPA_ANSICHT (160 MPH SPeedo, Non M Font, Able to add ///M Badge)

LOGO

3001 KI_PARAMETER
LOGO_SCHRIFTZUG
MSP_LOGO

CAR COLOR AND TRIM

HU_MGU
EXPERT MODE
3000 HMI_SPEECH
TRIM_LINE
MSPORTPAKET

3000 HMI_SPEECH
VEHICLE_COLOUR

VTENGR · 02-15-2021, 02:44 PM

The TACH side of your cluster looks completely different than mine. Is that how your car came stock or did you change it via coding? My TACH goes zero to 7 and takes up the entire right portion of the cluster.

mrichione · 02-15-2021, 02:57 PM

Quote:

Originally Posted by B530e

Hey Guys,

I have a 2021 X5 sDrive 40i (xline, Arctic Grey). When I purchased it, the car in the Instrument Cluster and Navigation screen was Jatoba Brown however I know it should match the color of my car. I went in and coded the proper color and changed the vehicle from xLine to Msport. I also changed the cluster to M Font from standard and that allowed me to add the M logo and other logos that are ordinary unavailable with stock cluster. Before and after photos are below with coding instructions. Enjoy. Also tested this on my 2020 5 Series and was successful.

M Font and Logo

DKombi4
Expert Mode
3001 KI_Parameter
AG_MPA_MSP_VIEW
MPA_ANSICHT_260_SKALA

LOGO

3001 KI_PARAMETER
LOGO_SCHRIFTZUG
MSP_LOGO

CAR COLOR AND TRIM

HU_MGU
EXPERT MODE
3000 HMI_SPEECH
TRIM_LINE
MSPORTPAKET

3000 HMI_SPEECH
VEHICLE_COLOUR

What is the default value to remove the logo after set to MSP per your LOGO instructions section?

BimmerVinyl · 02-15-2021, 04:01 PM

This is great information. Thank you for sharing!!

roadkillrob · 02-15-2021, 06:08 PM

This is great, I like the M gauge setup but miss that is doesn't show drive mode etc, but M font on standard gauges is a nice compromise!

B530e · 02-15-2021, 10:15 PM

Quote:

Originally Posted by VTENGR

The TACH side of your cluster looks completely different than mine. Is that how your car came stock or did you change it via coding? My TACH goes zero to 7 and takes up the entire right portion of the cluster.

It came that way. Mostly all 2021 "40i" models come with a power gauge due to the fact it uses a 48v hybrid system. You can change it in the display settings to display a tachometer instead.

B530e · 02-15-2021, 10:16 PM

Quote:

Originally Posted by roadkillrob

This is great, I like the M gauge setup but miss that is doesn't show drive mode etc, but M font on standard gauges is a nice compromise!

I completely agree

B530e · 02-15-2021, 10:17 PM

Quote:

Originally Posted by JackB316

This is great information. Thank you for sharing!!

Absolutely

B530e · 02-15-2021, 10:18 PM

Quote:

Originally Posted by mrichione

Quote:

Originally Posted by B530e

Hey Guys,

I have a 2021 X5 sDrive 40i (xline, Arctic Grey). When I purchased it, the car in the Instrument Cluster and Navigation screen was Jatoba Brown however I know it should match the color of my car. I went in and coded the proper color and changed the vehicle from xLine to Msport. I also changed the cluster to M Font from standard and that allowed me to add the M logo and other logos that are ordinary unavailable with stock cluster. Before and after photos are below with coding instructions. Enjoy. Also tested this on my 2020 5 Series and was successful.

M Font and Logo

DKombi4
Expert Mode
3001 KI_Parameter
AG_MPA_MSP_VIEW
MPA_ANSICHT_260_SKALA

LOGO

3001 KI_PARAMETER
LOGO_SCHRIFTZUG
MSP_LOGO

CAR COLOR AND TRIM

HU_MGU
EXPERT MODE
3000 HMI_SPEECH
TRIM_LINE
MSPORTPAKET

3000 HMI_SPEECH
VEHICLE_COLOUR

What is the default value to remove the logo after set to MSP per your LOGO instructions section?

Kein_logo

Shawzy44 · 02-16-2021, 09:58 AM

I assume there is no way to code in the wheels? I am picking up a set of 758i's that I'd love to have show up onscreen.

VTENGR · 02-16-2021, 09:59 AM

Quote:

Originally Posted by B530e

It came that way. Mostly all 2021 "40i" models come with a power gauge due to the fact it uses a 48v hybrid system. You can change it in the display settings to display a tachometer instead.

That makes sense. Thanks!

B530e · 02-16-2021, 11:56 PM

Quote:

Originally Posted by Shawzy44

I assume there is no way to code in the wheels? I am picking up a set of 758i's that I'd love to have show up onscreen.

From what I see, no. It gives you a list of different versions. xline, sport line, luxury line, v12 excellence etc. The versions are preloaded to each picture.

Silver.Solid · 02-18-2021, 09:24 AM

exactly what ive been looking for (for months), thanks for the write up and pics!

Silver.Solid · 02-19-2021, 03:28 AM

Tried it and works well. Anyone know how to switch the font on the HUD to match the M font?

Kas63 · 02-19-2021, 04:44 AM

Like the mix of fonts and original dash layouts.

How did you achieve this?

Was it a Bimmercode level of change or do you need the more complex coding platforms to do this?

Cheers

sucoru · 02-19-2021, 09:16 PM

Quote:

Originally Posted by Silver.Solid

Tried it and works well. Anyone know how to switch the font on the HUD to match the M font?

I was thinking the same thing.

B530e · 02-20-2021, 12:22 AM

Quote:

Originally Posted by Silver.Solid

exactly what ive been looking for (for months), thanks for the write up and pics!

Absolutely. It literally took me two months to figure it out.

B530e · 02-20-2021, 12:23 AM

Quote:

Originally Posted by Silver.Solid

Tried it and works well. Anyone know how to switch the font on the HUD to match the M font?

I'd like to know that too. I'll try and figure it out also. Keep you posted

B530e · 02-20-2021, 12:24 AM

Quote:

Originally Posted by Kas63

Like the mix of fonts and original dash layouts.

How did you achieve this?

Was it a Bimmercode level of change or do you need the more complex coding platforms to do this?

Cheers

Hello, I made the changes with Bimmercode

Bambazonke · 02-22-2021, 11:57 PM

Quote:

Originally Posted by B530e

Hello, I made the changes with Bimmercode

I have also being experimenting with the TRIM_LINE & VEHICLE_COLOUR in Esys since I got my G05 X5 late last year trying to get the rims to match what is actually on the car with no luck.

Note if you can access X_VIEW option in Bimmercode expert mode. You may want to activate this as on S Drive models it is turned off by default. May come in handy if you are ever towing a caravan or boat up a mountain pass

atlas · 03-02-2021, 08:15 AM

Very handy thanks

Fpgiuliano · 03-03-2021, 11:06 AM

Quote:

Originally Posted by B530e

Hey Guys,

I have a 2021 X5 sDrive 40i (xline, Arctic Grey). When I purchased it, the car in the Instrument Cluster and Navigation screen was Jatoba Brown however I know it should match the color of my car. I went in and coded the proper color and changed the vehicle from xLine to Msport. I also changed the cluster to M Font from standard and that allowed me to add the M logo and other logos that are ordinary unavailable with stock cluster. Before and after photos are below with coding instructions. Enjoy. Also tested this on my 2020 5 Series and was successful.

M Font and Logo

-DKombi4
-Expert Mode
-3001 KI_Parameter
-AG_MPA_MSP_VIEW

MPA_ANSICHT_260_SKALA (160 MPH Speedo, M Font)
MPA_ANSICHT_330_SKALA (200 MPH Speedo, M Font)
MPA_ANSICHT (160 MPH SPeedo, Non M Font, Able to add ///M Badge)

LOGO

3001 KI_PARAMETER
LOGO_SCHRIFTZUG
MSP_LOGO

CAR COLOR AND TRIM

HU_MGU
EXPERT MODE
3000 HMI_SPEECH
TRIM_LINE
MSPORTPAKET

3000 HMI_SPEECH
VEHICLE_COLOUR

Hi , sorry I don’t understand... i have the tachometer in the 1’ image..
if I want add only M badge under the camera (leaving 160mph) isn’t possibile?
I need to change to 200 mph scale?

I would leave the scale and the font.. (for me, is very horrible Msport font)

02-15-2021, 01:01 PM	#1
B530e Second Lieutenant 284 Rep 202 Posts Drives: 2023 BMW 760xi, 2024 BMW 530i Join Date: Oct 2018 Location: Montecito, California iTrader: (0) Garage List 2021 BMW 540i [0.00] 2020 BMW 530e [0.00]	Hey Guys, I have a 2021 X5 sDrive 40i (xline, Arctic Grey). When I purchased it, the car in the Instrument Cluster and Navigation screen was Jatoba Brown however I know it should match the color of my car. I went in and coded the proper color and changed the vehicle from xLine to Msport. I also changed the cluster to M Font from standard and that allowed me to add the M logo and other logos that are ordinary unavailable with stock cluster. Before and after photos are below with coding instructions. Enjoy. Also tested this on my 2020 5 Series and was successful. M Font and Logo -DKombi4 -Expert Mode -3001 KI_Parameter -AG_MPA_MSP_VIEW MPA_ANSICHT_260_SKALA (160 MPH Speedo, M Font) MPA_ANSICHT_330_SKALA (200 MPH Speedo, M Font) MPA_ANSICHT (160 MPH SPeedo, Non M Font, Able to add ///M Badge) LOGO 3001 KI_PARAMETER LOGO_SCHRIFTZUG MSP_LOGO CAR COLOR AND TRIM HU_MGU EXPERT MODE 3000 HMI_SPEECH TRIM_LINE MSPORTPAKET 3000 HMI_SPEECH VEHICLE_COLOUR Attached Images __________________ Last edited by B530e; 02-17-2021 at 12:00 AM..
	Appreciate 14 BimmerVinyl400.50 Silver.Solid116.00 mandomedic12240.50 Shawzy44158.00 babyghost94.50 Dr. Jekyll209.50 VetteZ0662.50 THATDONFC32.00 wall_nut63.50 Atlantis800012.00 mbernstein4.50 kristal980.00 Bottom1615.50 sac0249.50 Tweet Quote

02-15-2021, 02:44 PM	#2
VTENGR Lieutenant Colonel 1053 Rep 1,951 Posts Drives: 2020 X5 M50i Join Date: Aug 2018 Location: Atlanta iTrader: (1)	The TACH side of your cluster looks completely different than mine. Is that how your car came stock or did you change it via coding? My TACH goes zero to 7 and takes up the entire right portion of the cluster.
	Appreciate 0 Quote

02-15-2021, 04:01 PM	#4
BimmerVinyl Banned 401 Rep 338 Posts Drives: 2022 M240i Join Date: Mar 2015 Location: USA iTrader: (0)	This is great information. Thank you for sharing!!
	Appreciate 0 Quote

02-15-2021, 06:08 PM	#5
roadkillrob Major General 857 Rep 5,446 Posts Drives: 08 335i,22 X3M, 2012 C63 Black Join Date: Jul 2007 Location: Boston iTrader: (15)	This is great, I like the M gauge setup but miss that is doesn't show drive mode etc, but M font on standard gauges is a nice compromise! __________________ 2022 X3M Brooklyn Grey 2008 E93 335i FBO 2012 Mercedes C63 Black Series Alanite Grey
	Appreciate 1 BimmerVinyl400.50 Quote

02-16-2021, 09:58 AM	#10
Shawzy44 Second Lieutenant 158 Rep 294 Posts Drives: 2019 BMW X5 40iX Join Date: Jul 2019 Location: Toronto, ON iTrader: (0)	I assume there is no way to code in the wheels? I am picking up a set of 758i's that I'd love to have show up onscreen. __________________ Shawzy44 2023 BMW X3 M40i 2019 BMW X5 40iX 2019 BMW 440iX M Performance Cabriolet
	Appreciate 0 Quote

02-18-2021, 09:24 AM	#13
Silver.Solid Second Lieutenant 116 Rep 253 Posts Drives: '19 X5 Join Date: Dec 2019 Location: Riyadh iTrader: (0)	exactly what ive been looking for (for months), thanks for the write up and pics!
	Appreciate 0 Quote

02-19-2021, 03:28 AM	#14
Silver.Solid Second Lieutenant 116 Rep 253 Posts Drives: '19 X5 Join Date: Dec 2019 Location: Riyadh iTrader: (0)	Tried it and works well. Anyone know how to switch the font on the HUD to match the M font?
	Appreciate 0 Quote

02-19-2021, 04:44 AM	#15
Kas63 Private First Class 80 Rep 109 Posts Drives: 2020 X5 M50d Join Date: Sep 2020 Location: Cheshire iTrader: (0)	Like the mix of fonts and original dash layouts. How did you achieve this? Was it a Bimmercode level of change or do you need the more complex coding platforms to do this? Cheers __________________ 2020 M50d - Arctic Gray with Ivory White/Black Vernasca
	Appreciate 0 Quote

03-02-2021, 08:15 AM	#21
atlas Lieutenant 383 Rep 583 Posts Drives: F10 535i, M2 LCI, G05 X5 40i Join Date: Nov 2009 Location: Melbourne, Australia iTrader: (0)	Very handy thanks
	Appreciate 0 Quote