04-11-2021, 10:59 PM | #45 |
Lieutenant
251
Rep 581
Posts |
Thanks all, I was able to get all my information. All fuses from F20 to F38 should be Battery(constant) power and all fuses from F59 to F76 should be ACC(switched) power.
I used F59 and F27. I used add a fuse tap adapter and F27 adapter was a bit too tall and trim piece to the bottom right didnt fit completely well, but is not too noticeable. F59 is used for USB, Garage door opener, Auto dimming rear view mirror(I think) and headlamps |
Appreciate
0
|
04-15-2021, 01:23 AM | #46 |
Lieutenant Colonel
569
Rep 1,764
Posts |
I also test F72, which is easily exposed without having to remove side trim, and it was still live after 15 minutes.
__________________
2024 X3 m40i
|
Appreciate
0
|
04-15-2021, 10:43 AM | #47 | |
Lieutenant
251
Rep 581
Posts |
Quote:
You can also use my post where I posted the whole range of switched and constant fuses https://g05.bimmerpost.com/forums/sh...0&postcount=45 |
|
Appreciate
0
|
04-15-2021, 10:45 AM | #48 |
Lieutenant
251
Rep 581
Posts |
BTW does anyone see this battery malfunction alert when using dashcam. Should I ignore it? I verified that the dashcam is actually in parking mode and not constantly pulling full power when car is sleeping. But I think the car wants 0 power to be pulled.
|
Appreciate
0
|
04-15-2021, 06:09 PM | #49 | |
Major
478
Rep 1,298
Posts |
Quote:
Nope, but I have a battery pack. I also installed a eMYLO remote switch which I use to turn off the camera completely when I park in the garage. The BlackVue 900x does not have a manual on/off switch so the only way to turn it off is to unplug the power cable every time. No need to have it running in parking mode when my vehicle is parked in the garage and drawing power for 10 minutes before it switches over to battery power. There is also no need to draw power from my battery pack while sitting in the garage. The switch is attached to the back of the battery pack and the battery pack is mounted out of the way in rear driver's side cubby to the back of the amp bracket. You can't even see the battery pack back there (blue box in last pic). Works like a charm. I can turn on and off my camera from the second floor of my house. The range is incredible. Forum member SmartSaves and myself worked on the switch concept together.
__________________
_____________________________________ 2021 X6M Competition, 2021 Audi SQ5 Technik, 2013 Audi S4 |
|
Appreciate
3
|
04-15-2021, 06:13 PM | #50 | |
Lieutenant
251
Rep 581
Posts |
Quote:
|
|
Appreciate
0
|
04-15-2021, 06:23 PM | #51 | |
Second Lieutenant
152
Rep 217
Posts |
Quote:
There seem to be a number of things that stay on no matter what, and I think when it drops to a certain voltage the it maybe finally shuts off and pops up that message. I haven’t seen it for awhile and I think I have mine set to shut off at 12.7 maybe. I would have to look at the dip switches to verify. At the end of the day I believe it’s the BMW saying hey you have something drawing power we aren’t aware of. But all completely guesses on my part |
|
Appreciate
0
|
04-15-2021, 06:31 PM | #52 | |
Major
478
Rep 1,298
Posts |
Quote:
I don't know what camera you a running so hard to say . However, I have seen 2 different messages for battery warnings on BMW's 1 is the dreaded "Low Battery Discharge" warning which I used to get on my E71 and, 2 this one you have. I have not seen the former on the F86 yet, but my guess is the voltage monitoring system is seeing a parasitic drain on the battery when the car is off and it's saying "this is not normal, something is drawing power when car is off" and it is giving you this message as a precaution to check that something is wrong. Just a guess, but it may continue to be persistent as long as the camera is connected to the fusebox drawing power when the car is shut off. You can try a different fuse and see if that fixes the issue, just live with it, or go battery pack route.
__________________
_____________________________________ 2021 X6M Competition, 2021 Audi SQ5 Technik, 2013 Audi S4 |
|
Appreciate
1
jonatious250.50 |
04-15-2021, 06:35 PM | #53 | |
Major
478
Rep 1,298
Posts |
Quote:
I think Chris and I are basically saying the same thing.
__________________
_____________________________________ 2021 X6M Competition, 2021 Audi SQ5 Technik, 2013 Audi S4 |
|
Appreciate
0
|
04-15-2021, 06:58 PM | #54 |
Major
478
Rep 1,298
Posts |
Chris, you may want to set the power magic pro to 12v. If it is higher than that when you crank over your X and the battery temporarily dips below that 12.7v the BlackVue will shut down because it was below the set threshold cut off set on the powermagic. So if that ever happens this is the reason.
__________________
_____________________________________ 2021 X6M Competition, 2021 Audi SQ5 Technik, 2013 Audi S4 |
Appreciate
0
|
04-15-2021, 11:50 PM | #55 | |
Lieutenant
251
Rep 581
Posts |
Quote:
|
|
Appreciate
0
|
04-15-2021, 11:55 PM | #56 | |
Lieutenant
251
Rep 581
Posts |
Quote:
|
|
Appreciate
0
|
05-26-2021, 09:18 PM | #58 | |
Second Lieutenant
152
Rep 217
Posts |
Quote:
You need ATA and Micro |
|
Appreciate
0
|
08-20-2021, 10:33 PM | #59 |
X5 Enthusiast
462
Rep 762
Posts
Drives: 2021 X5
Join Date: Aug 2020
Location: Neighbourhood of Santa
|
Sharing my feedback if someone follow this thread. I ran two wires through D pillar and inside the roofliner (same as the OP's video), but neglected to wrap/insulate the cables with Tesa tape. These two cables are now creating intermittent reverberating rattling noise when I drive on some uneven surfaces. I hear cable vibration noise if I slightly tap/punch the roofliner between D and C pillar. I'll need to re-do the wiring and zip tie those as much as possible; learn from my mistake 🙈
Update: my mistake, the sound was coming from loose sunroof screws.
__________________
2021 X5, Excellence, M Sport, DHP, DAP, RSE, MW, Merino.
|
Appreciate
0
|
08-23-2021, 12:13 AM | #60 | |
Lieutenant Colonel
569
Rep 1,764
Posts |
Quote:
__________________
2024 X3 m40i
|
|
Appreciate
0
|
08-23-2021, 12:42 PM | #61 | |
X5 Enthusiast
462
Rep 762
Posts
Drives: 2021 X5
Join Date: Aug 2020
Location: Neighbourhood of Santa
|
Quote:
https://blackvue.com/product/blackvu...-parking-mode/
__________________
2021 X5, Excellence, M Sport, DHP, DAP, RSE, MW, Merino.
|
|
Appreciate
1
hyde569.00 |
09-03-2021, 11:03 PM | #62 | |
Lieutenant Colonel
569
Rep 1,764
Posts |
Quote:
The Power Magic Pro has cigarette lighter port so it can work with any dashcam, my only problem is finding one switched and one constant fuse. Which fuses should we use in the front for these two? There was some contradiction as I tested the fuse before that was listed was still active (live) when I shut off the engine and waited until lights turned off. Can we confirm F59 and F27 are the fuses we can use? I will order the taps too, can anyone tell me what size fuses are these? ATM an Mini 2?
__________________
2024 X3 m40i
|
|
Appreciate
0
|
09-19-2021, 05:02 PM | #63 | |
Lieutenant Colonel
569
Rep 1,764
Posts |
Quote:
__________________
2024 X3 m40i
|
|
Appreciate
0
|
01-28-2022, 11:19 AM | #64 | |
Registered
0
Rep 2
Posts |
Quote:
|
|
Appreciate
0
|
01-29-2022, 09:35 PM | #65 | ||
X5 Enthusiast
462
Rep 762
Posts
Drives: 2021 X5
Join Date: Aug 2020
Location: Neighbourhood of Santa
|
Quote:
__________________
2021 X5, Excellence, M Sport, DHP, DAP, RSE, MW, Merino.
|
||
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
dashcam, g05, thinkware |
|
|