[Tylast]

Has anyone experienced a problem coding the VIP ECU? I'm on 03/2023.67. I know I'm using ProTool (latest version), but I thought perhaps you guys may experienced something similar. Basically all the TLA & SLA parameters in VIP are being written EXCEPT these two:

C_SLA_aSLA_Land_Aktiv
C_SLA_Streckenregelung_Land_Aktiv

I get an error upon writing too. Any ideas?

Update: Putting the vehicle in maintenance mode solved it. TLA works now.

[Bambazonke]

Originally Posted by Tylast

Has anyone experienced a problem coding the VIP ECU? I'm on 03/2023.67. I know I'm using ProTool (latest version), but I thought perhaps you guys may experienced something similar. Basically all the TLA & SLA parameters in VIP are being written EXCEPT these two:

C_SLA_aSLA_Land_Aktiv
C_SLA_Streckenregelung_Land_Aktiv

I get an error upon writing too. Any ideas?

No experience with Protool but my logic is saying a mapping issue if all the other Land Aktiv parameters in the ECU are able to be changed maybe others using BU or other software that are on 03/2023 or 07/2023 can chime in to see if it is the software or BMW limiting the mask ranges as I am on 07/2022

[marteuk]

Last year I used this sheet for my UK G05 and can confirm emergency lane ant traffic assist worked. I remember not everything i was able to code, but it worked. After latest OTA tried to code again, and now getting country not available error, altough can see traffic light phases on the dash. using 22 esys with launcher pro 5 and latest pszdata lite

BDC 3420 9 9 11000000b SITUATIVER_ABSTAND (only nicht active available to chose)

HU_MGU 3006 5 5 00000100AbDAS_2DH_HORIZON_EXTENSION (missing)

SAS3/42C1 3000 192 192 11111111b C_RGA_Funktion (missing)

SAS3/42C1 3002 137 137 11111111b EM_ElectronicHorizon_MostProbablePathBending (missing)

SAS3/42C1 3000 179 182 11111111b C_SLA_UCC_Land_aktiv (wrote FF,FF,FF,FF in the edit menu, but above in drop menu it turns to unknown)

SAS3/42C1 3000 184 187 11111111b C_SLA_QmaN_Land_aktiv (wrote FF,FF,FF,FF in the edit menu, but above in drop menu it turns to unknown)

SAS3/42C1 3000 188 191 11111111b C_SLA_aUCC_Land_aktiv (missing)

SAS3/42C1 3000 193 196 11111111b C_RGA_Land_aktiv (missing)

SAS3/42C1 3000 197 200 11111111b C_RGA_Seitenwahl_links_Land_aktiv (missing)

VIP/3D14 3020 111 114 11111111b C_SLA_aSLA_Land_Aktiv (missing)

3D14 3020 215 215 11111111b C_SLA_Streckenregelung_vorhanden NR001_vorhanden NR_002_vorhanderne_qSuiLreAs_e>n=t1k9o0p7pelt (missing)

3D14 3020 216 219 11111111b C_SLA_Streckenregelung_Land_Aktiv (missing)

3D14 3020 114 114 11111111b C_SLA_Anzeige_Zusatztexte (missing)

3D14 3020 117 117 11111111b C_SLA_aSLA_vorhanden (missing)
3D14 3025 5 5 11111111b EM_ElectronicHorizon_MostProbablePathBending (missing)

3D14 3025 6 6 11111111b EM_AdasIntegration_AdasExtendedPdu enabled 2007, 6U3 (missing)

3D14 3020 210 213 11111111b C_SLA_Vorausschau_Land_aktiv (missing)

3D14 3020 179 182 11111111b C_SLA_UCC_Land_aktiv (missing)

40F9 3103 37 37 11111111b LDW_C_ELKA_DEB_DSI_DEACT_LMRE TRUE >=2007 (missing)

40F9 3103 38 38 11111111b LDW_C_ELKA_DEB_DSI_ACTIV_LMRE TRUE >=2007, (missing)

40F9 3103 41 42 11111111b LDW_C_RB_TYPE_NODSI_BITMASK initwert - 15,00 >=2007 (missing)

3103 37 37 11111111b LDW_C_ELKA_DEB_DSI_DEACT_LMRE TRUE >=2007, (missing)

3103 38 38 11111111b LDW_C_ELKA_DEB_DSI_ACTIV_LMRE TRUE >=2007, (missing)

3103 41 42 11111111b LDW_C_RB_TYPE_NODSI_BITMASK initwert - 15,00 >=2007 (missing)

[lpawelek]

I can confirm that almost all ECU's can be coded by the BimmerUtility. I cannot find in KAFAS sections of LDW_C_ELKA... and others connected with the Lane Departure Warning as well as mentioned by Bambazonka in previous post EM_AdasIntegration_AdasExtendedPdu. I'm after the OTA update and the TLA as well as aSLA working good, even better than before. I don't know how the lack of coding the EM_AdasIntegration_AdasExtendedPdu impact on the system working...
Additionally, I've coded the STOPPCHIELDER in MGU and in BDC BODY so I have active checkbox and the sign in aSLA menu but camera doesn't recognize the STOP sing .

[postbox1918]

Originally Posted by lpawelek

I can confirm that almost all ECU's can be coded by the BimmerUtility. I cannot find in KAFAS sections of LDW_C_ELKA... and others connected with the Lane Departure Warning as well as mentioned by Bambazonka in previous post EM_AdasIntegration_AdasExtendedPdu. I'm after the OTA update and the TLA as well as aSLA working good, even better than before. I don't know how the lack of coding the EM_AdasIntegration_AdasExtendedPdu impact on the system working...
Additionally, I've coded the STOPPCHIELDER in MGU and in BDC BODY so I have active checkbox and the sign in aSLA menu but camera doesn't recognize the STOP sing .

You need fsc code for stop sign recognition option to work as far i read on multiple forums over web, but if you don't mind can you share the coding for STOPPCHIELDER in MGU and in BDC.

[lpawelek]

I used in BU option find STOPSCHILDER in those 2 ECU's:
[BDC_BODY3 7083] STOPSCHILDER Yes=01|No=00
[HU_MGU 3E52] STOPSCHILDER No=00|Gen1=01

Hope for your experience with this function
I found on internet the file G07 Keylist with much more options of coding. It seems that this file is form Asian coder

[postbox1918]

Originally Posted by lpawelek

I used in BU option find STOPSCHILDER in those 2 ECU's:
[BDC_BODY3 7083] STOPSCHILDER Yes=01|No=00
[HU_MGU 3E52] STOPSCHILDER No=00|Gen1=01

Hope for your experience with this function
I foudn on interest the file G07 Keylist with much more options of coding. It seems that this file is form Asian coder

I'm wondering if any coding also requires in KAFAS ecu in order for camera to recognize stop sign.

[lpawelek]

Originally Posted by postbox1918

I'm wondering if any coding also requires in KAFAS ecu in order for camera to recognize stop sign.

I've scrolled the Kafas on the BU, but didn't saw any related coding options and in the file there are any codes in Kafas on that function.

[postbox1918]

Originally Posted by lpawelek

I've scrolled the Kafas on the BU, but didn't saw any related coding options and in the file there are any codes in Kafas on that function.

Ok got it.

[lpawelek]

If you want I can send you whole file for further testing

[postbox1918]

Originally Posted by lpawelek

If you want I can send you whole file for further testing

Yeah sure, thanks

[Maksym48]

Originally Posted by lpawelek

If you want I can send you whole file for further testing

I would be grateful if you could send me a file, too.
Thank you!

[tommytexter]

Originally Posted by Bambazonke

Anyone wanting a copy of the cheatsheet can download a copy from the Facebook Easy Bimmer Coding group Home page on Facebook. You will probably have to join the group to access it

Any chance u can send me the link or file? zding15@gmail.com
My car is g20 not sure if i can do this
Bambazonke

[SBimmy]

Originally Posted by Bambazonke

No experience with Protool but my logic is saying a mapping issue if all the other Land Aktiv parameters in the ECU are able to be changed maybe others using BU or other software that are on 03/2023 or 07/2023 can chime in to see if it is the software or BMW limiting the mask ranges as I am on 07/2022

Hi Bambazonke,

Is there anyone know if I need to code VFW_country or country_WWA for enable the TLA?

Thank you

[Bambazonke]

Originally Posted by SBimmy

Hi Bambazonke,

Is there anyone know if I need to code VFW_country or country_WWA for enable the TLA?

Thank you

No these are not required for TLA to work. The above coding is for Priority Warning ie Stop or Give Way Signs and for models built after 07/2020 traffic lights and WWA (Wrong Way Warning) There is no evidence that the enablement of the above 2 features is a prerequisite for TLA to work. Unfortunately I am not in a position to validate this as TLA does not work in Australia due to the map database missing Traffic Light Location data. WWA & VFW does not work here either and I cannot code it as it requires an FSC code which the dealer cannot supply

[mlurker]

Originally Posted by lpawelek

I used in BU option find STOPSCHILDER in those 2 ECU's:
[BDC_BODY3 7083] STOPSCHILDER Yes=01|No=00
[HU_MGU 3E52] STOPSCHILDER No=00|Gen1=01

Hope for your experience with this function
I found on internet the file G07 Keylist with much more options of coding. It seems that this file is form Asian coder

Can you share the file please

[mlurker]

Originally Posted by Bambazonke

No these are not required for TLA to work. The above coding is for Priority Warning ie Stop or Give Way Signs and for models built after 07/2020 traffic lights and WWA (Wrong Way Warning) There is no evidence that the enablement of the above 2 features is a prerequisite for TLA to work. Unfortunately I am not in a position to validate this as TLA does not work in Australia due to the map database missing Traffic Light Location data. WWA & VFW does not work here either and I cannot code it as it requires an FSC code which the dealer cannot supply

Could you please share your cheatlist as well, trying to activate TLA, looks like have an incomplete list of options to change.

[Bambazonke]

mlurker PM me your email address

[SBimmy]

Originally Posted by Bambazonke

No these are not required for TLA to work. The above coding is for Priority Warning ie Stop or Give Way Signs and for models built after 07/2020 traffic lights and WWA (Wrong Way Warning) There is no evidence that the enablement of the above 2 features is a prerequisite for TLA to work. Unfortunately I am not in a position to validate this as TLA does not work in Australia due to the map database missing Traffic Light Location data. WWA & VFW does not work here either and I cannot code it as it requires an FSC code which the dealer cannot supply

Thank you!
I have updated my BU to 1.0.64. Have you notice any missing codes for TLA for this version? Because i still cant get it work. ( it use to be work before i updated my car to 07.2023)

[postbox1918]

Originally Posted by SBimmy

Thank you!
I have updated my BU to 1.0.64. Have you notice any missing codes for TLA for this version? Because i still cant get it work. ( it use to be work before i updated my car to 07.2023)

The more newer software update you do on your car the less you can code , i disabled auto update in idrive and on the phone app since 03.2023 update because I lost the ability to code disable auto start/stop feature with that update.

[Bambazonke]

SBimmy
Did you copy my cheat sheet into the BU cheat sheet directory and enter the coding changes in comfort mode? or manually in expert mode. From previous experience with BU, i would save the NCD file after every change and then recheck it at the end. I have an old copy of Launcher Pro that reads cheat sheets and I usually open the modified file in LP just to double check the coding changes are correct before I upload to the car.
There are no missing or incorrect labelling for my current cheat sheet in the latest version of BU v1.0.64

[SBimmy]

Originally Posted by Bambazonke

SBimmy
Did you copy my cheat sheet into the BU cheat sheet directory and enter the coding changes in comfort mode? or manually in expert mode. From previous experience with BU, i would save the NCD file after every change and then recheck it at the end. I have an old copy of Launcher Pro that reads cheat sheets and I usually open the modified file in LP just to double check the coding changes are correct before I upload to the car.
There are no missing or incorrect labelling for my current cheat sheet in the latest version of BU v1.0.64

I just used your cheat sheet manually in expert mode and some original comfort mode of 1.0.64.
Your current cheat sheet is the same as last year?

Thank you