01-18-2020, 08:07 AM | #1 |
Private First Class
90
Rep 130
Posts |
Alignment Question
I posted this in the X7 forums but no one was able to respond and there aren't sub-forums on various topics and I'm hoping the X5 is similar enough that this forum could help.
Essentially I had an alignment done on my 2020 X7 40i with IAS and it came back pulling to the right a bit still. I asked for the measurements and I was surprised to see that they delivered me the vehicle with a cross camber out of threshold. I think the camber values make sense (from what I can read online, car will pull in the direction of the wheel with the highest absolute value of camber angle) - in both pre and post alignment the higher value was on the right which corresponds to how I felt the car pulling. Questions are: 1. Is it common for a dealer to deliver a car with a spec out of threshold and call it aligned (especially after what I paid for the IAS alignment)? 2. Is there anything else that the forum notices from the measurements? Thanks in advance for any thoughts / advice. |
Post Reply |
Bookmarks |
|
|