04-18-2021, 03:15 AM | #397 | |
Private First Class
79
Rep 194
Posts |
Quote:
I don't have your expertise but I suspect that since the Traffic Light logo shows up on my instrument clusters every time I'm getting close to a traffic light means two things: 1- it's not Maps related because the data isn't available in the system and yet it picks it up 2- the KAFAS are actually working (and this makes me wonder why SLI does not work for me. Maybe due to the car type?) This leads me to think that this is more likely to be related to the geographic restrictions. I still have to max-out all land masks (takes time to find them all, I guess) to exhaust that possibility. I'll then try, as an experiment, to change the car type from US to ECE (using TypSchlussel) to see if there's any difference. If there isn't, we can rule that Middle East region is blocked by BMW for these features. |
|
Appreciate
0
|
04-18-2021, 07:12 AM | #398 |
Lieutenant Colonel
1200
Rep 1,587
Posts |
SLI--> SLA --> aSLA --> TLA
As I said, you fail on SLI so I wouldn't bother considering why the rest doesn't work. Mapping is needed for SLA, but I doubt it is for TLA, other than the dependency on SLA. |
Appreciate
0
|
04-18-2021, 04:10 PM | #399 | |
Private First Class
79
Rep 194
Posts |
Quote:
I'll try to change the car type as a last move and will revert back to original code if it doesn't work — this sounds like the most appropriate course of action for me. |
|
Appreciate
0
|
04-18-2021, 04:31 PM | #400 | ||
Lieutenant Colonel
1200
Rep 1,587
Posts |
Quote:
Even if it allows it I wouldn't do a full car vo code with that level of change. It might be fine but I would expect some major changes across the board to all ECU and it might kill your car. Just changing the type without coding is unlikely to do anything until you get an istep upgrade. Then all hell could break loose. Don't forget you have some us specific hardware |
||
Appreciate
1
Consuldean78.50 |
04-19-2021, 12:43 AM | #402 |
Lieutenant Colonel
1200
Rep 1,587
Posts |
|
Appreciate
0
|
04-19-2021, 03:36 AM | #403 | |
Private First Class
79
Rep 194
Posts |
Quote:
I'd buy the maps if I had a level of confidence that aSLA and TLA would work seamlessly in this region (I know SLI would because I had a previous BMW car from this region where the speed limit was displayed correctly here). Paying this amount and finding myself in the same situation as now would be very frustrating |
|
Appreciate
0
|
04-19-2021, 04:00 AM | #404 | |
Lieutenant Colonel
1200
Rep 1,587
Posts |
Quote:
Remind me, where are you based? If it's a region where aSLA and TLA are working, then there is a fair chance it will work. Both systems work on US type cars with coding. TLA mixed results but that could be the TL physical design |
|
Appreciate
0
|
04-19-2021, 04:12 AM | #405 | |
Private First Class
79
Rep 194
Posts |
Quote:
I don't think that there's any report of aSLA and TLA working in the region just yet. And when I see the result of the coding on my car currently where it picks up the traffic lights only using KAFAS but unable to read the actual colours (I have a red cross showing up next to the traffic light sign on my instrument cluster) in addition to the message saying the feature is inactive in this country, I have reasonable doubt that it may not work even after the maps update. But your thinking process about dividing it by # of days/hours spent in the car is a good one |
|
Appreciate
0
|
05-02-2021, 02:13 AM | #407 |
Private First Class
79
Rep 194
Posts |
Just an update to everyone here who's willing to give a try on enabling aSLA, auto lane change and TLA on their cars.
After maximising all masks to FF, FF, FF, FF, the result for me is the same: 1- TLA: while the car detects the red lights, it's not able to deduct the actual colour and I get a red cross next to the logo on the instrument cluster/HUD 2- aSLA / Auto Lane Change: As soon as I activate driving assistant, I get a pop up notification on the screen indicating that some functions are not available in this country. For full transparency, here are the elements I was *not* able to code in the list that was previously shared. I'm not sure about the reason but I couldn't find them in the respective ECUs. SAS3/42C1 C_SLA_QmaN_Land_aktiv SAS3/42C1 C_SLA_aUCC_Land_aktiv SAS3/42C1 C_RGA_Land_aktiv SAS3/42C1 C_ACC_AAE_Vorhanden SAS3/42C1 C_RGA_Seitenwahl_links_Land_aktiv SAS3/42C1 EM_AdasIntegration_AdasExtendedPdu SAS3/42C1 C_QmaN_Vorhanden SAS3/42C1 C_RGA_Funktion 3E52 HU_MGU RETTUNGSGASSE 3E52 HU_MGU SITUATIVERABSTAND 3E52 HU_MGU STRECKENVERLAUF_GENERATION 3E52 HU_MGU ADAS_2DH_HORIZON_EXTENSION 3E52 HU_MGU SICHT_ABSICHT 3E52 HU_MGU STRECKENVERLAUF_GENERATION 7083 BDC EINSEITIG_VORBEIFAHREN Bottom line: A- the maps in the car are essential for these features to work. KAFAS isn't enough (that's an obvious one). B- Based on the message on the screen, there's a great likelihood that these features are disabled in the system for the Middle East (just like e.g. Australia) I'll be reverting back to default values on these since that's been unsuccessful until I eventually decide to purchase the maps for the region and give it another go. |
Appreciate
0
|
05-02-2021, 02:52 AM | #408 |
Brigadier General
2295
Rep 4,452
Posts |
@consuldean Were you using BimmerCode as that can’t access all ECUs, so you’d need to try EsysX to code the other values.
Without any coding of this type, I have found that TLA doesn’t work and I get the pop-up per 2) when I first activate Assisted Driving for a journey. |
Appreciate
0
|
05-02-2021, 02:58 AM | #409 | |
Private First Class
79
Rep 194
Posts |
Quote:
|
|
Appreciate
0
|
05-02-2021, 03:56 AM | #410 | ||
Lieutenant Colonel
1200
Rep 1,587
Posts |
Quote:
It's not possible. Latest esysx and psdzdata is required. Plus valid maps of course. |
||
Appreciate
0
|
05-02-2021, 08:44 AM | #411 | |||
Private First Class
79
Rep 194
Posts |
Quote:
Just for my reference: it's not possible because the mapping isn't done for the latest versions and would this be a reason why we couldn't see the lines I listed above? Thanks anyway for the information, I somehow missed that through the reading I did on the forums. |
|||
Appreciate
0
|
05-02-2021, 09:04 AM | #412 | |
Lieutenant Colonel
1200
Rep 1,587
Posts |
Quote:
1) provide a cert for fdl coding 2) map psdzdata as all codes are now trimmed by default Every i-step upgrade needs newer psdzdata to support FDL coding. New codes are introduced with psdzdata and some existing codes are updated. LP hasn't properly' supported the S18A models for nearly 2 years. TM attempted to update to the latest at the time with LP 3.7 but a lot of codes were mapped incorrectly or missing. Getting the 'key' for the mappings has to come from BMW insiders, and is harder than ever now, which may have been part of the reason he got it so wrong. Suffice to say, there are many trimmed or incorrectly mapped codes with latest i-step/psdzdata and LP 3.7 |
|
Appreciate
1
Consuldean78.50 |
05-05-2021, 08:02 AM | #413 |
Enlisted Member
9
Rep 42
Posts |
ALL Toma Launcher is not show many code.
only need esysx new psdzdata mapping version.
__________________
2014 ~ 2017 Chevrolet Cruze J300 1.8
2017 ~ 2019 Mercedes Benz W205 C200 2019 ~ 2020 KIA Motors YG K7 Premier 3.0 2020 ~ BMW G20 320i |
Appreciate
0
|
05-13-2021, 08:30 AM | #414 |
Captain
523
Rep 804
Posts |
I got 03/2021.46 at the dealer this week and I now have the traffic light assistant options in the settings, but the car says they are not available in Finland (just like some other driving assistant features). Is it easy to enable these in Finland?
|
Appreciate
0
|
05-13-2021, 09:17 AM | #415 |
Second Lieutenant
43
Rep 242
Posts |
If ur have already this option on ur Idrive maybe u will need to change land mask
|
Appreciate
0
|
05-13-2021, 09:40 AM | #416 |
Captain
523
Rep 804
Posts |
|
Appreciate
0
|
05-13-2021, 10:54 AM | #417 |
Second Lieutenant
43
Rep 242
Posts |
|
05-16-2021, 05:45 AM | #418 |
Brigadier General
1800
Rep 3,063
Posts |
Yes, easily codeable. You need E-SysX as previously mentioned with newest psdzdata and mappings. If you're not comfortable with coding feel free to contact us.
__________________
Apple CarPlay Fullscreen for NBTEVO / ENTRYNAV2 / Anti-Dazzle F/G
CS FLASH G8X /GTS FLASH F8X / F8X Ultimate PACK / NBTEVO iDrive 6 FLASH iDrive Firmware Update + CarPlay Fullscreen -> Video Process Visit BIMMER-REMOTE.com - 10% OFF with BIMMERPOST_10 promocode info@bimmer-remote.com or PM |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|