[jad03060]

Are any of the modules required for anti-dazzle to function part of those that are 'locked' by the latest software version for the pre-LCI? IOW, can you still program that function if you have 03/23 installed?

[larrylam646]

Originally Posted by jad03060

Are any of the modules required for anti-dazzle to function part of those that are 'locked' by the latest software version for the pre-LCI? IOW, can you still program that function if you have 03/23 installed?

There is a function in Esys that can identify which (if any of) ECUs are 'locked'.

I have not been able to validate if this function is working since none of the ECU in my vehicle that I code/update are 'locked'.

FYI, my vehicle FW ilevel is up-to-date (03/23 - S18A-23-03-550).

[TheNine90]

You can vo code secure coding ECU using modified FA, fdl coding is currently not possible

[weinerbarn]

I updated to 03/2023 right after it was released to dealers around late Feb I think and coded anti-dazzle via BimmerUtility at the same time.

[alabesky]

Originally Posted by weinerbarn

I updated to 03/2023 right after it was released to dealers around late Feb I think and coded anti-dazzle via BimmerUtility at the same time.

What is bimmerutility??

[weinerbarn]

Originally Posted by alabesky

What is bimmerutility??

https://www.bimmerutility.com/

Similar to BimmerCode in that you can run it standalone on a mobile device but on a Windows laptop, you can have much greater functionality as it works with E-Sys which is the BMW factory software. Same license you can run on laptop and a mobile device.

[Sample]

I was able to code anti dazzle with esys+protools after doing the 3/23 update.

[alabesky]

Originally Posted by weinerbarn

https://www.bimmerutility.com/

Similar to BimmerCode in that you can run it standalone on a mobile device but on a Windows laptop, you can have much greater functionality as it works with E-Sys which is the BMW factory software. Same license you can run on laptop and a mobile device.

👍🏼👍🏼would i need to have esys on the pc to be able to use bimmerutility?

[weinerbarn]

Originally Posted by alabesky

👍🏼👍🏼would i need to have esys on the pc to be able to use bimmerutility?

Yes but they provide links to the software upon purchase of the BU license.

[Wintrmte]

Originally Posted by Sample

I was able to code anti dazzle with esys+protools after doing the 3/23 update.

I don't suppose there is a write-up that you can do, or followed for this?

[alabesky]

Originally Posted by weinerbarn

Yes but they provide links to the software upon purchase of the BU license.

👍🏼👍🏼 thanks for clarifying! Looks very promising!

[Sample]

Originally Posted by Wintrmte

I don't suppose there is a write-up that you can do, or followed for this?

I removed 5AP and VO Coded HU_MGU, BDC_Body3, KAFAS4, FLM [43], FLM [44] using Esys.

Then used Protools to do the "FDL" coding that my copy of Esys doesnt do.

General guide is here post #35: https://g05.bimmerpost.com/forums/sh...1852315&page=2

He mentions he doesn't trust protools for VO coding. That's why I used Esys for that. But there are posts (post #1 in that thread) that used only Protools to code it. I've not tried to VO code with Protools.

Additionally, after I did the Protools "popular" coding for Anti-Dazzle, I went into Expert mode->3100 Common and set Country_Variation to Europe_RC. Also went into 3102 Light Detection and set C_FLA_CC_MESSAGE_3 to No_CC_Message.

[Wintrmte]

Originally Posted by Sample

I removed 5AP and VO Coded HU_MGU, BDC_Body3, KAFAS4, FLM [43], FLM [44] using Esys.

Then used Protools to do the "FDL" coding that my copy of Esys doesnt do.

General guide is here post #35: https://g05.bimmerpost.com/forums/sh...1852315&page=2

He mentions he doesn't trust protools for VO coding. That's why I used Esys for that. But there are posts (post #1 in that thread) that used only Protools to code it. I've not tried to VO code with Protools.

Additionally, after I did the Protools "popular" coding for Anti-Dazzle, I went into Expert mode->3100 Common and set Country_Variation to Europe_RC. Also went into 3102 Light Detection and set C_FLA_CC_MESSAGE_3 to No_CC_Message.

Thank you!!!