BimmerCode App just updated..

motex · 02-29-2020, 11:48 PM

Quote:

Originally Posted by James_G0530d

Quote:

Originally Posted by motex

Anyone knows if it's possible to code the tail lights outer rings ON during daylight driving?
I had it on my former F15 and looked great

Outer rings? - do you have a pic?

Sorry couldn't find a better word, i meant the perimeter of the stop lights

DinoZ · 03-04-2020, 01:32 AM

Hi all,
is the new g06 supported on bimmer code app?
thx

James_G0540i · 03-04-2020, 01:38 AM

Quote:

Originally Posted by DinoZ

Hi all,
is the new g06 supported on bimmer code app?
thx

Go to the following and find out: https://bimmercode.app/cars/

In short, YES.

DinoZ · 03-04-2020, 01:43 AM

Quote:

Originally Posted by James_G0530d

Go to the following and find out: https://bimmercode.app/cars/

In short, YES.

thx

James_G0540i · 03-04-2020, 06:51 PM

Bimmercode App now at 2.17-6-6421 on Android.
I'll check it out today and see if there is anything new, particularly in the BDC ECU

UPDATE:
Same ECUs, same features - no update to anything you can code - at least that I could tell.

I did notice stability improvement when connecting to the car, no failures or errors - so that's a good thing !

AlexDragu · 03-05-2020, 12:22 AM

Hey guys, i have updated my car to new software 2020.3.25 and i wanted to activate assistant drive view, but bimmer now doesn t support all the modules 😢

kamilkoc · 03-05-2020, 02:16 AM

Quote:

Originally Posted by AlexDragu

Hey guys, i have updated my car to new software 2020.3.25 and i wanted to activate assistant drive view, but bimmer now doesn t support all the modules 😢

Any noticeable changes after the upgrade? new features?

AlexDragu · 03-05-2020, 08:56 AM

Only one, i can program that when is cold outside and start the car the steering wheel is starting to heat, like seat heater and ventilation.

Mikli · 03-06-2020, 02:18 PM

Just picked up the MX+. I guess no luck to get more coding done with IOS until the next APP update...
We can't control the exhaust flap to be always on yet?

X54TH · 03-06-2020, 02:43 PM

Quote:

Originally Posted by Mikli

Just picked up the MX+. I guess no luck to get more coding done with IOS until the next APP update...
We can't control the exhaust flap to be always on yet?

Not from the Bimmercode App but I think Bimmerlink App can do it.

Marty in NY · 03-06-2020, 02:48 PM

Quote:

Originally Posted by X54TH

Not from the Bimmercode App but I think Bimmerlink App can do it.

Right X54TH, Bimmerlink has it as one of its features.

LexxM3 · 03-06-2020, 05:58 PM

Quote:

Originally Posted by X54TH

Quote:

Originally Posted by Mikli

Just picked up the MX+. I guess no luck to get more coding done with IOS until the next APP update...
We can't control the exhaust flap to be always on yet?

Not from the Bimmercode App but I think Bimmerlink App can do it.

BimmerLink App will let you control the flap in real time when engine is running, but it won't let you set it permanently open (or closed). As such, BimmerLink is useful for opening the flap and then applying one of the other flap disable methods: pull the fuse, pull the control cable, pull the pin and wiretie flap open. I don't recall seeing any flap control by coding yet.

samvora · 03-06-2020, 06:22 PM

Quote:

Originally Posted by LexxM3

BimmerLink App will let you control the flap in real time when engine is running, but it won't let you set it permanently open (or closed). As such, BimmerLink is useful for opening the flap and then applying one of the other flap disable methods: pull the fuse, pull the control cable, pull the pin and wiretie flap open. I don't recall seeing any flap control by coding yet.

Or leave the adapter plugged in - that is what I do and it triggers the flap open each time the car is started. have not seen any drawback of leaving the adapter plugged in and on the contrary it is more convenient anytime I want to code something or re-code after a dealer visit because then I do not have to go look for the adapter and then crawl under and plug it in, blah blah blah.

LexxM3 · 03-06-2020, 06:26 PM

Quote:

Originally Posted by samvora

Quote:

Originally Posted by LexxM3

BimmerLink App will let you control the flap in real time when engine is running, but it won't let you set it permanently open (or closed). As such, BimmerLink is useful for opening the flap and then applying one of the other flap disable methods: pull the fuse, pull the control cable, pull the pin and wiretie flap open. I don't recall seeing any flap control by coding yet.

Or leave the adapter plugged in - that is what I do and it triggers the flap open each time the car is started. have not seen any drawback of leaving the adapter plugged in and on the contrary it is more convenient anytime I want to code something or re-code after a dealer visit because then I do not have to go look for the adapter and then crawl under and plug it in, blah blah blah.

Hm, interesting. So keep the BT adapter plugged in AND make sure BimmerLink app is still installed/BT turned on on the phone. Then BimmerLink app automatically connects to adapter (without being launched) and activates last selected flap state? Plausible, but I only question automatic BimmerLink app BT connect without being launched.

hkleyman · 03-06-2020, 07:54 PM

Quote:

Originally Posted by AlexDragu

Hey guys, i have updated my car to new software 2020.3.25 and i wanted to activate assistant drive view, but bimmer now doesn t support all the modules 😢

Can you post a screenshot of what modules are and are not supported?

samvora · 03-06-2020, 08:27 PM

Quote:

Originally Posted by LexxM3

Quote:

Originally Posted by samvora

Quote:

Originally Posted by LexxM3

BimmerLink App will let you control the flap in real time when engine is running, but it won't let you set it permanently open (or closed). As such, BimmerLink is useful for opening the flap and then applying one of the other flap disable methods: pull the fuse, pull the control cable, pull the pin and wiretie flap open. I don't recall seeing any flap control by coding yet.

Or leave the adapter plugged in - that is what I do and it triggers the flap open each time the car is started. have not seen any drawback of leaving the adapter plugged in and on the contrary it is more convenient anytime I want to code something or re-code after a dealer visit because then I do not have to go look for the adapter and then crawl under and plug it in, blah blah blah.

Hm, interesting. So keep the BT adapter plugged in AND make sure BimmerLink app is still installed/BT turned on on the phone. Then BimmerLink app automatically connects to adapter (without being launched) and activates last selected flap state? Plausible, but I only question automatic BimmerLink app BT connect without being launched.

Sorry I missed that part. Yes, you have to launch the app each time and the way I have it set up is using voice control on iPhone where I get in the car and just tell my phone to open a BimmerLink.

TSMC55 · 03-06-2020, 10:48 PM

Quote:

Originally Posted by samvora

Quote:

Originally Posted by LexxM3

Quote:

Originally Posted by samvora

Quote:

Originally Posted by LexxM3

BimmerLink App will let you control the flap in real time when engine is running, but it won't let you set it permanently open (or closed). As such, BimmerLink is useful for opening the flap and then applying one of the other flap disable methods: pull the fuse, pull the control cable, pull the pin and wiretie flap open. I don't recall seeing any flap control by coding yet.

Or leave the adapter plugged in - that is what I do and it triggers the flap open each time the car is started. have not seen any drawback of leaving the adapter plugged in and on the contrary it is more convenient anytime I want to code something or re-code after a dealer visit because then I do not have to go look for the adapter and then crawl under and plug it in, blah blah blah.

Hm, interesting. So keep the BT adapter plugged in AND make sure BimmerLink app is still installed/BT turned on on the phone. Then BimmerLink app automatically connects to adapter (without being launched) and activates last selected flap state? Plausible, but I only question automatic BimmerLink app BT connect without being launched.

Sorry I missed that part. Yes, you have to launch the app each time and the way I have it set up is using voice control on iPhone where I get in the car and just tell my phone to open a BimmerLink.

or you could just get an app which launchers the bimmerlink app each time your phone's bluetooth connects to your car.

At least you can if you have android. I cannot speak for apple.

samvora · 03-06-2020, 10:49 PM

Quote:

Originally Posted by TSMC55

Quote:

Originally Posted by samvora

Quote:

Originally Posted by LexxM3

Quote:

Originally Posted by samvora

Quote:

Originally Posted by LexxM3

BimmerLink App will let you control the flap in real time when engine is running, but it won't let you set it permanently open (or closed). As such, BimmerLink is useful for opening the flap and then applying one of the other flap disable methods: pull the fuse, pull the control cable, pull the pin and wiretie flap open. I don't recall seeing any flap control by coding yet.

Or leave the adapter plugged in - that is what I do and it triggers the flap open each time the car is started. have not seen any drawback of leaving the adapter plugged in and on the contrary it is more convenient anytime I want to code something or re-code after a dealer visit because then I do not have to go look for the adapter and then crawl under and plug it in, blah blah blah.

Hm, interesting. So keep the BT adapter plugged in AND make sure BimmerLink app is still installed/BT turned on on the phone. Then BimmerLink app automatically connects to adapter (without being launched) and activates last selected flap state? Plausible, but I only question automatic BimmerLink app BT connect without being launched.

Sorry I missed that part. Yes, you have to launch the app each time and the way I have it set up is using voice control on iPhone where I get in the car and just tell my phone to open a BimmerLink.

or you could just get an app which launchers the bimmerlink app each time your phone's bluetooth connects to your car.

At least you can if you have android. I cannot speak for apple.

Ima just do the fuse pull tonight

Mikli · 03-07-2020, 03:59 AM

Ok. Thanks for the input about the exhaust flap. I have Sport+ but want to see if I could have it open while in adaptive or comfort mode.

Please confirm if I could code within BDC with the current version 3.4(10299) in ISO? When is the next update?

ikheetleon · 03-07-2020, 05:45 AM

Quote:

Originally Posted by samvora

Sorry I missed that part. Yes, you have to launch the app each time and the way I have it set up is using voice control on iPhone where I get in the car and just tell my phone to open a BimmerLink.

You can automate this on iphone with the “shortcuts” app. As condition you can set it when bluetooth or airplay connection is made.

scottjays · 03-07-2020, 03:54 PM

Why is it taking dev so long to update app? really wanting to code, close trunk lid and set drive mode adv.

Resjudicata · 03-07-2020, 09:35 PM

Quote:

Originally Posted by scottjays

Why is it taking dev so long to update app? really wanting to code, close trunk lid and set drive mode adv.

Quote:

Originally Posted by scottjays

Why is it taking dev so long to update app? really wanting to code, close trunk lid and set drive mode adv.

hire rg33 to remote code everything for you.

03-04-2020, 01:32 AM	#948
DinoZ New Member 0 Rep 13 Posts Drives: X6 M50D (F16) Join Date: Mar 2012 Location: Switzerland iTrader: (0)	G06 with bimmer code Hi all, is the new g06 supported on bimmer code app? thx
	Appreciate 0 Quote

03-04-2020, 06:51 PM	#951
James_G0540i Captain 446 Rep 810 Posts Drives: 2021 X5 G05 40i M Sport Join Date: Sep 2019 Location: Melbourne, Australia iTrader: (0)	Bimmercode App now at 2.17-6-6421 on Android. I'll check it out today and see if there is anything new, particularly in the BDC ECU UPDATE: Same ECUs, same features - no update to anything you can code - at least that I could tell. I did notice stability improvement when connecting to the car, no failures or errors - so that's a good thing ! Last edited by James_G0540i; 03-05-2020 at 02:30 AM..
	Appreciate 1 raindropm468.00 Quote

03-05-2020, 12:22 AM	#952
AlexDragu Enlisted Member 17 Rep 46 Posts Drives: G05 Join Date: May 2019 Location: Romania iTrader: (0)	Hey guys, i have updated my car to new software 2020.3.25 and i wanted to activate assistant drive view, but bimmer now doesn t support all the modules 😢
	Appreciate 0 Quote

03-05-2020, 08:56 AM	#954
AlexDragu Enlisted Member 17 Rep 46 Posts Drives: G05 Join Date: May 2019 Location: Romania iTrader: (0)	Only one, i can program that when is cold outside and start the car the steering wheel is starting to heat, like seat heater and ventilation.
	Appreciate 0 Quote

03-06-2020, 02:18 PM	#955
Mikli First Lieutenant 88 Rep 380 Posts Drives: G05F36F16F82E90E86E46E36E30 Join Date: Mar 2007 Location: Van_City iTrader: (1)	Just picked up the MX+. I guess no luck to get more coding done with IOS until the next APP update... We can't control the exhaust flap to be always on yet?
	Appreciate 0 Quote

03-07-2020, 03:59 AM	#965
Mikli First Lieutenant 88 Rep 380 Posts Drives: G05F36F16F82E90E86E46E36E30 Join Date: Mar 2007 Location: Van_City iTrader: (1)	Ok. Thanks for the input about the exhaust flap. I have Sport+ but want to see if I could have it open while in adaptive or comfort mode. Please confirm if I could code within BDC with the current version 3.4(10299) in ISO? When is the next update?
	Appreciate 0 Quote

03-07-2020, 03:54 PM	#967
scottjays Starfleet Command 315 Rep 785 Posts Drives: 2020 X5 M50i Join Date: Jan 2010 Location: SoFla iTrader: (0)	Why is it taking dev so long to update app? really wanting to code, close trunk lid and set drive mode adv. __________________ 2020 X5 M50i Phytonic Blue w/ Black Merino 22" 747M wheels,
	Appreciate 0 Quote