[larrylam646]

Originally Posted by lknbimmers

Thank you Larry
This worked for me as well!
I do have an additional question
With the amber lights now off, is it still possible to enable the fog lights with the parking lights?

My M340iX is not equipped with front fog lights so I cannot answer your question but if the ECE G05 can be equipped with front fog lights from the factory, then I do not believe VO Coding your FLMs to ECE would disable your front fogs.

Can you still turn your front fogs on/off? If you can, then I do not believe you will be prevented from coding the operation of the fogs.

Sorry, I could not be more helpful.

[lknbimmers]

Originally Posted by larrylam646

My M340iX is not equipped with front fog lights so I cannot answer your question but if the ECE G05 can be equipped with front fog lights from the factory, then I do not believe VO Coding your FLMs to ECE would disable your front fogs.

Can you still turn your front fogs on/off? If you can, then I do not believe you will be prevented from coding the operation of the fogs.

Sorry, I could not be more helpful.

Got this working. There are no issues having the fog lights on with the disabled parking lights.
Same goes for fog lights on with the high beams.

[shatty]

Can this be done using protools on android? I know its more detailed than BC

[eldyf93]

Originally Posted by hkleyman

The lights can be coded to the European spec to disable the side marker light. You'll need a desktop grade coding app, you can't do it from BimmerCode as far as I know.

There's five values to edit on two ECUs instead of changing the VO/FA to euro spec headlights. It's more prudent to change the LM03 voltage values to 0x00 (zero) on each front light module rather than to hamfistedly tell the car it has Euro lights installed when it does not.

[atervardanyan]

Originally Posted by eldyf93

There's five values to edit on two ECUs instead of changing the VO/FA to euro spec headlights. It's more prudent to change the LM03 voltage values to 0x00 (zero) on each front light module rather than to hamfistedly tell the car it has Euro lights installed when it does not.

Could you please clarify which 5 values specifically?

[eldyf93]

Originally Posted by atervardanyan

Could you please clarify which 5 values specifically?

Code both front light modules FLM

LM03_DUTY_CYCLE_BINNING_CLASS0 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS1 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS2 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS3 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS4 ---> Wert_01 [00]

You could technically find out which BINNING_CLASS the LED "LM03" is set to on your car and set just that value to Wert_01. Which is hex value 0x00. But just set all of the five possibilities to zero and that side marker light will turn off.

[atervardanyan]

Thanks, will give it a try

[samsamdar]

Originally Posted by eldyf93

Code both front light modules FLM

LM03_DUTY_CYCLE_BINNING_CLASS0 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS1 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS2 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS3 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS4 ---> Wert_01 [00]

You could technically find out which BINNING_CLASS the LED "LM03" is set to on your car and set just that value to Wert_01. Which is hex value 0x00. But just set all of the five possibilities to zero and that side marker light will turn off.

This worked perfectly to turn off the sidemarkers on my pre-LCI G05 X5 with lasers - thanks!

[eldyf93]

Originally Posted by samsamdar

This worked perfectly to turn off the sidemarkers on my pre-LCI G05 X5 with lasers - thanks!

glad you like it!

[atervardanyan]

Originally Posted by eldyf93

Code both front light modules FLM

LM03_DUTY_CYCLE_BINNING_CLASS0 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS1 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS2 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS3 ---> Wert_01 [00]
LM03_DUTY_CYCLE_BINNING_CLASS4 ---> Wert_01 [00]

You could technically find out which BINNING_CLASS the LED "LM03" is set to on your car and set just that value to Wert_01. Which is hex value 0x00. But just set all of the five possibilities to zero and that side marker light will turn off.

Changing just
LM03_DUTY_CYCLE_BINNING_CLASS2 ---> Wert_01 [00]
Worked for my US Laster lights on g05