[postbox1918]

M track module installation was done after lots of hiccups couple of days ago and finally the remote coding was done in my X5M50i last night ,
Didnt got enough time to play with it but i'll update my experience later with it.

[lknbimmers]

Side bar question
The M track module displays the oil and coolant temp?

[postbox1918]

Originally Posted by lknbimmers

Side bar question
The M track module displays the oil and coolant temp?

No not the oil temp just add additional info like boost psi, tire pressure to the stock info already comes in X5M50i cluster , i don't know or remember if X5M shows engine and coolant temp separately,
Also no ACC or DA info on cluster or on HUD when sports mode is activated may be X5M owners can shed some light on this topic if that happens in X5M too.

[MaximK]

Originally Posted by postbox1918

M track module installation was done after lots of hiccups couple of days ago and finally the remote coding was done in my X5M50i last night ,
Didnt got enough time to play with it but i'll update my experience later with it.

Seems your M-Track Module isn't coded properly , RPM is fully red on side

[postbox1918]

Originally Posted by MaximK

Seems your M-Track Module isn't coded properly , RPM is fully red on side

May be possible, When the car is turned off RPM's are grey but after it turns on and as you rev it start turning red to grey from bottom. I'll try to double check with some X5M owner lol.
But anyhow thanks for pointing out

[MaximK]

yes , that s some coding issues in your cluster , you should ask your coder to fix that issue

[postbox1918]

Originally Posted by MaximK

yes , that s some coding issues in your cluster , you should ask your coder to fix that issue

Yeah i asked him and he said he'll fix it , he did it because he thinks this theme looks better lol

[D10]

I wanted to do this on mine but apparently if you have the cruise control buttons you can’t? Are you missing those options? Where’d ya get it from

[postbox1918]

Originally Posted by D10

I wanted to do this on mine but apparently if you have the cruise control buttons you can’t? Are you missing those options? Where’d ya get it from

It support BDC3 module cars so thats why this module works with ACC pro package, I ordered it from a vendor in china . ACC works fine and driver's assistance view only works in comfort mode but not in sports mode . I'm still testing it because i was reading thread's here on forums where some people complaints about having some electrical issues and draining battery in there 3 series so I'll test it for some time and see if its not causing any issues like that, also the color coding of wiring was not right at all so took 2 , 3 attempts to finally connect it with BDC module because getting technical support from vendor is not easy there's time zone difference, language barrier and vendor passes the questions to manufacturer and i didn't want to keep experimenting with bdc wiring because its a very serious module of the car.
It was a little frustrating experience.
I will update my findings and if any issue it causes to the car.

[CharlesJung]

Coding information that changes the RPM color of the instrument cluster.

Applies to two themes: M Instrument Cluster and M Track View.


[DKOMBI4] Instrument Cluster → 3001 KI_Parameter → DZM_VARIANTE

01 : Diesel b57 engine
02 : Gasolin except b58 engine
03 : Gasolin b58 engine
04 : Gasolin s58 M (Over 7,000rpm is yellow)
05 : Gasolin s63t4 M (Over 6,700rpm is yellow)

[postbox1918]

Originally Posted by CharlesJung

Coding information that changes the RPM color of the instrument cluster.

Applies to two themes: M Instrument Cluster and M Track View.


[DKOMBI4] Instrument Cluster → 3001 KI_Parameter → DZM_VARIANTE

01 : Diesel
02 : Gasolin except b58 engine
03 : Gasolin b58 engine
04 : Gasolin s58 M (Over 7,000rpm is yellow)
05 : Gasolin s63t4 M (Over 6,700rpm is yellow)

Thanks, so i have to pick
05 : Gasolin s63t4 M (Over 6,700rpm is yellow)? Because my X5 is coded as X5M

[postbox1918]

Originally Posted by CharlesJung

Coding information that changes the RPM color of the instrument cluster.

Applies to two themes: M Instrument Cluster and M Track View.


[DKOMBI4] Instrument Cluster → 3001 KI_Parameter → DZM_VARIANTE

01 : Diesel b57 engine
02 : Gasolin except b58 engine
03 : Gasolin b58 engine
04 : Gasolin s58 M (Over 7,000rpm is yellow)
05 : Gasolin s63t4 M (Over 6,700rpm is yellow)

I checked the coding and its already on Gasolin s63t4#05

[postbox1918]

Fixed the cluster coding.
Changed 2 settings:
CTR_DISP_M_SYS_TIMEOUT: nicht_aktiv
HMI_VORWARNFELD_KOMBI_ENABLE: nicht_aktiv
Both were set to aktiv and changed to nicht_aktiv

[JohnRoth]

Would you mind posting the information of vendor please, found them on aliexpress, don’t see remote coding included

[postbox1918]

Originally Posted by JohnRoth

Would you mind posting the information of vendor please, found them on aliexpress, don’t see remote coding included

The vendor charged me extra $50 for coding, so its not included .

[eelnoraa]

Originally Posted by postbox1918

No not the oil temp just add additional info like boost psi, tire pressure to the stock info already comes in X5M50i cluster , i don't know or remember if X5M shows engine and coolant temp separately,
Also no ACC or DA info on cluster or on HUD when sports mode is activated may be X5M owners can shed some light on this topic if that happens in X5M too.

Really. I kind of think k too left, above boost pressure, that is Coolant temp. Bottom right, that is oil temp (the oil symbol). ??

[postbox1918]

Originally Posted by eelnoraa

Really. I kind of think k too left, above boost pressure, that is Coolant temp. Bottom right, that is oil temp (the oil symbol). ??

I think both shows the same temp , but I'll double check and will get back to you.

[eelnoraa]

Originally Posted by postbox1918

I think both shows the same temp , but I'll double check and will get back to you.

Under normal day to day operation, the temperature should be very similar. I can think of two situations coolant will be very different than oil temp. During cold start, coolant will rise up your mid point very quickly, in the matter I’d 2-3 min. Oil will take a lot longer, maybe 15-20. During hard track driving, coolant will remain at about 21xF, but oil can go up to 250F.

Maybe maybe a look at both at cold start should tell the story.

[007bandido]

Hello,
I received the module to test. Fair price, quick delivery. Have a question before start the installation, the manual is not very exhaustive... where is located the plug in image #2? In the glove fuse box? Thanks.

https://1drv.ms/b/s!AvGhh2aNRueOhwRI...e5233e5fvozD1p

Found this:

[postbox1918]

Originally Posted by 007bandido

Hello,
I received the module to test. Fair price, quick delivery. Have a question before start the installation, the manual is not very exhaustive... where is located the plug in image #2? In the glove fuse box? Thanks.

https://1drv.ms/b/s!AvGhh2aNRueOhwRI...e5233e5fvozD1p

Found this: https://youtu.be/7n-6qL2r1VA

The M track module connects to wiring of body control module of your car , what kind of car do you have?

[007bandido]

Hello,

Thanks for your help.

I found the connector. Initially, I didn't understand.

I have a 2020 G05 Diesel 30D fully equipped. When I opened the connector, I don't have the same slots with the same colors. For example, I don't have a cable in 32, but I have a brown cable in 25. For cable 7, I don't have the same color, mine is orange-blue. On the other hand, my 1 is red-yellow.

I guess, according to the instruction manual, I have to change cable 32 for 25, cable 7 for cable 1. Correct? Cables 35 and 36 seem to be the same. For 36, yellow-white. For 35, yellow-black.

https://1drv.ms/i/s!ApdyxZ3hXY5tibQZ...1Kx5Q?e=g8ZhtW

https://1drv.ms/i/s!ApdyxZ3hXY5tibQY...FIl4A?e=tBdEuc

[aleksy]

Originally Posted by 007bandido

Hello,

Thanks for your help.

I found the connector. Initially, I didn't understand.

I have a 2020 G05 Diesel 30D fully equipped. When I opened the connector, I don't have the same slots with the same colors. For example, I don't have a cable in 32, but I have a brown cable in 25. For cable 7, I don't have the same color, mine is orange-blue. On the other hand, my 1 is red-yellow.

I guess, according to the instruction manual, I have to change cable 32 for 25, cable 7 for cable 1. Correct? Cables 35 and 36 seem to be the same. For 36, yellow-white. For 35, yellow-black.

https://1drv.ms/i/s!ApdyxZ3hXY5tibQZ...1Kx5Q?e=g8ZhtW

https://1drv.ms/i/s!ApdyxZ3hXY5tibQY...FIl4A?e=tBdEuc

Hey, I have exactly the same set up as you.
Colors are different and no cable In ‘32’ is missing.
Have you tried to connect it switching it as you mentioned above ?