08-22-2019, 03:45 PM | #1 |
Private
3
Rep 50
Posts |
[Coding]Start to coding G05
Hello,
Even I coded with success my old F11, I'm quite a newbie in this field and need some help to start to have fun coding with my swiss G05 30D (december 2018). I installed Launcher and Pro 3.51, Esys 3.33.4 and PSdZData V.4.18.33_PSdZData_Lite (thanks Tokenmaster) in my notebook with Win7-64 OS. I used this parameters to connect my car... https://www.dropbox.com/s/qbdaklj09s...ture2.JPG?dl=0 and seems Ok using target S18A 1907. I could read and activate the FA but when I tried to read VCM, I had this error... https://www.dropbox.com/s/bwtlkwmt9r...pture.JPG?dl=0 All ECU are in red. What I did wrong or what I did not ? I will appreciate your help and sorry for my poor english. Regards, Miguel |
08-23-2019, 12:59 AM | #4 | |
Guest
0
Rep n/a
Posts
Drives:
|
Quote:
DKOMBI4 (Kombi_2018) took just under 2 mins on first open. A couple of secs on subsequent openings. Last edited by archivedaccount; 08-23-2019 at 01:16 AM.. |
|
Appreciate
0
|
08-23-2019, 01:46 AM | #5 |
Private
25
Rep 90
Posts |
|
Appreciate
0
|
08-23-2019, 07:09 AM | #7 |
First Lieutenant
293
Rep 341
Posts |
My environment is slower that the older releases but it is not nearly that slow.
The longest and ECU takes is 10-15 seconds. Running on an older MacBook Pro with 16gb RAM. Loading launcher with 8192MB.
__________________
If my post was informative or helpful, please click the appreciate button. Thank you.
|
Appreciate
0
|
08-23-2019, 10:48 AM | #8 |
Private
3
Rep 50
Posts |
My notebook in an old Lenovo T430 i7, 16 Gb RAM, SSD... Clairly, I configured something wrong to be much more slower than you.
I will try with an old Mac Book Pro. Maybe is a good time to run for a new notebook Regards |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|