[leightos]

As week 46 comes to a close and Week 47 begins, I figured I'd start this thread.
I'm still prod Date 11/22 as of Sat eve.

[roxxor]

Same for me as of today, scheduled for 11/22. We will see if it stays the same tomorrow!

[Cannondale900]

Same. Seems like a lot of us have been on the same ride.

WK 44 status 112 to WK 46 status 112 to WK 48 status 150 (11/28) to WK 47 status 150 (11/22)

Feeling like its time to finally order a level 2 charger. I need a thanksgiving weekend project anyway.

[roxxor]

I feel you cannondale. We moved since I had my 530e and I have the old L2 charger in a box in the garage. Guess I will get it out this week and figure out where to install it in the new house. Plus make sure wife will be happy with where it goes so we don’t mess up the aesthetics of the house lol.

[Buzios]

Originally Posted by Cannondale900

Same. Seems like a lot of us have been on the same ride.

WK 44 status 112 to WK 46 status 112 to WK 48 status 150 (11/28) to WK 47 status 150 (11/22)

Feeling like its time to finally order a level 2 charger. I need a thanksgiving weekend project anyway.

Please share if you find a great one during Black Friday. I need one too

[Cannondale900]

Originally Posted by Buzios

Please share if you find a great one during Black Friday. I need one too

I've been debating for weeks between Juicebox, Chargepoint, and Autel due to their connectivity and scheduling features.

Clipper Creek and Grizzl-E look great as well (lack conenctivity).

30 mins ago I pulled trigger on Autel 50A hardwire with separate cradle to store the charging socket. Amazon for $499 ($100 off). Pros for me were 1) connectivity, 2) 50A capacity for future vehicles, and 3) remote cradle for charging socket.

[leightos]

Can't find anyone on this forum to speak out they are getting their car built today

[Cannondale900]

Originally Posted by leightos

Can't find anyone on this forum to speak out they are getting their car built today

Minlet was 11/21 if I recall correctly.

[roxxor]

I went with the ChargePoint home flex, got it for $450 open box back in late 2019 but I see the prices have gone up since then. Installed it using a 50a breaker which was probably overkill given what the 530e (and X5) could draw from it. Might go with only a 40a breaker this time around. The connected features worked great, only thing that’s a drawback now is that it has the constant light ring on it, which makes it less desirable (imo) for an outside install unless I can find a box to put it in. Otherwise it will stay inside and have to find a way to run the cord outside, which is what I did before.

[leightos]

Originally Posted by Cannondale900

Minlet was 11/21 if I recall correctly.

yeah.. that's look about right... but I was looking on the factory website and they build 1500 cars a day, so, whatever that number is of X5s (300-400?) - it would be great to hear from someone to gauge the progress. I'm still listed as build tomorrow.

[oheight335]

My vehicle was originally 11/21 Prod date, but it moved to 11/19 (it moved on 11/15 i think) and production was completed 11/18 (the status changed to awaiting carriage assignment late 11/18).

[leightos]

Originally Posted by oheight335

My vehicle was originally 11/21 Prod date, but it moved to 11/19 (it moved on 11/15 i think) and production was completed 11/18 (the status changed to awaiting carriage assignment late 11/18).

well that's good news they're on schedule - ... hmmm back to the World Cup, haha

[roxxor]

Just checked and mine now shows "Entering Assembly Line"

[leightos]

Originally Posted by roxxor

Just checked and mine now shows "Entering Assembly Line"

Niceeeeeeeeeeee... I wish mine did... still at 150. I was expecting someone to move up, that's why I been so pushy this week. You were always a bit ahead of me I believe.
Good luck

Update: mine slipped to 11/23 arggghhhhhhhhhh. Holding out hope mine will still enter assembly tomorrow.

[arRod1981]

Originally Posted by roxxor

I went with the ChargePoint home flex, got it for $450 open box back in late 2019 but I see the prices have gone up since then. Installed it using a 50a breaker which was probably overkill given what the 530e (and X5) could draw from it. Might go with only a 40a breaker this time around. The connected features worked great, only thing that’s a drawback now is that it has the constant light ring on it, which makes it less desirable (imo) for an outside install unless I can find a box to put it in. Otherwise it will stay inside and have to find a way to run the cord outside, which is what I did before.

You can turn it off in the settings.

[roxxor]

Originally Posted by arRod1981

You can turn it off in the settings.

Interesting, I never knew that. Thank you!

[Minlet]

Prod day was today 11/21/22 and it did not disappoint.

Moved from 150 Production begins all the way (past QC) to 182 Awaiting carrier assignment.

I'll post as to when it goes further to "dispatched from factory"

Car is going to Northern FL, so I would hope once it hits in-transit stage its a 6 hour trip.

[roxxor]

Nice minlet, we are neighbors! Mine however is initially going to middle of GA since that’s where I found a dealer with allocation, the ones in Jax told me it would be a 4-6 month wait.

[leightos]

Great info guys - Congrats ... mine is still 11/23 at the end of the day today.

[Cannondale900]

As of tonight, my 11/22 is status 153 entering assembly line. I logged in 2 hours ago and it was status 150.

[roxxor]

Woke up this morning to “Quality Check”, looks like all is on track.

Hopefully yours gets going today Leightos! (With some better QC for you this time!)

[leightos]

Originally Posted by roxxor

Woke up this morning to “Quality Check”, looks like all is on track.

Hopefully yours gets going today Leightos! (With some better QC for you this time!)

good luck.. - My Garage is down, can't check online. may have to call

Update: still scheduled for tomorrow 11/23. I'm getting worried many moving up and I'm not. Worried a part is not in. One more day slip pushes me to Monday