[Almaretto]

Originally Posted by Tlon

Just curious, but do you think these will be cracked at some point or are they just not likely to be cracked (as someone above suggested might be the case)?

NGHB definitely. The other two, not sure.

[AndroidRobot]

Originally Posted by Almaretto

NGHB definitely. The other two, not sure.

Definitely it will be cracked? I appreciate your insight, what type of encryption do they use? I'm no coding expert, but I have a friend who is

[Almaretto]

Originally Posted by AndroidRobot

Definitely it will be cracked? I appreciate your insight, what type of encryption do they use? I'm no coding expert, but I have a friend who is

It is not that type of coding; it does not take decryption.

E-sys just gives end-user access to modify additional settings.

It is about understanding vehicle architecture. Here is example, though new FLM2 modules are completely different.

[mbarrett635]

Originally Posted by AndroidRobot

Yes, US regulations don't let laser lights work fully including the anti dazzle. BMW got an exception with their i8 years ago now with them being more mass marker for BMW I hope regulations let them function to Euro Spec

Sorry, I knew that. I thought you were talking about the cornering lights.

[AndroidRobot]

Originally Posted by Almaretto

It is not that type of coding; it does not take decryption.

E-sys just gives end-user access to modify additional settings.

It is about understanding vehicle architecture. Here is [COLOR="RoyalBlue"]example[/COLOR], though new FLM2 modules are completely different.

I see. In other words it'll take time to figure out what is going on within each module before much can be done. Is there a way to compare US esys files to the euro ones and see what's enabled/disabled to speed things along?

[Almaretto]

Originally Posted by AndroidRobot

I see. In other words it'll take time to figure out what is going on within each module before much can be done. Is there a way to compare US esys files to the euro ones and see what's enabled/disabled to speed things along?

Yes.

You can use program like beyond compare.

[Almaretto]

Was looking at files. It is strange that 8S4 is not in VIN, but

• LUT_FLC_FORWARDLIGHTING_Y
• C_AFS_ENA

are turned off in US market. Those would re-enable cornering.

[Jrunr]

Originally Posted by Almaretto

Was looking at files. It is strange that 8S4 is not in VIN, but

• LUT_FLC_FORWARDLIGHTING_Y
• C_AFS_ENA

are turned off in US market. Those would re-enable cornering.

How do we re-enable them?? Seems like this could actually be a simple enough fix if this is the case. 😬

[bichoo]

Originally Posted by Almaretto

Was looking at files. It is strange that 8S4 is not in VIN, but

• LUT_FLC_FORWARDLIGHTING_Y
• C_AFS_ENA

are turned off in US market. Those would re-enable cornering.

Are you able to see these options under the ECU or did you just do a file compare? I heard most ECU's are unreadable right now.
Should be able to add 8S4 by VO Coding right?

[AndroidRobot]

Originally Posted by bichoo

Are you able to see these options under the ECU or did you just do a file compare? I heard most ECU's are unreadable right now.
Should be able to add 8S4 by VO Coding right?

Originally Posted by bichoo

Are you able to see these options under the ECU or did you just do a file compare? I heard most ECU's are unreadable right now.
Should be able to add 8S4 by VO Coding right?

I don't know if I can speak on his behalf but he can do a lot more than your or I.

[Almaretto]

Originally Posted by bichoo

Are you able to see these options under the ECU or did you just do a file compare? I heard most ECU's are unreadable right now.
Should be able to add 8S4 by VO Coding right?

Yes, i can read the ECU's.

Why would you add 8S4?

[bichoo]

Originally Posted by Almaretto

Yes, i can read the ECU's.

Why would you add 8S4?

Sorry, nevermind, meant remove. Its been a few years since I coded. I'm looking at my notes for the F25 and 5AP and 8S4 were removed and then the like 40 values in LHM were modified and a couple of more in FRM.

My X5 has 5AP, which is antiglare decoded. Are you seeing 5AP?
Can you change LUT_FLC_FORWARDLIGHTING_Y and C_AFS_ENA?

[Jrunr]

So... Are we going to enable these features???

[Almaretto]

Originally Posted by bichoo

Sorry, nevermind, meant remove. Its been a few years since I coded. I'm looking at my notes for the F25 and 5AP and 8S4 were removed and then the like 40 values in LHM were modified and a couple of more in FRM.

My X5 has 5AP, which is antiglare decoded. Are you seeing 5AP?
Can you change LUT_FLC_FORWARDLIGHTING_Y and C_AFS_ENA?

G05 has FLM2, rather than LHM/TMS like F25.

G05 will have 5AP, but not 8S4.

Yes, I can change that and so could anyone as is it in Launcher-mapped ECU. The other ECU's/CAFD may cause issue for some.

[AndroidRobot]

Originally Posted by Almaretto

G05 has FLM2, rather than LHM/TMS like F25.

G05 will have 5AP, but not 8S4.

Yes, I can change that and so could anyone as is it in Launcher-mapped ECU. The other ECU's may cause issue for some.

I assume this is what enables cornering lights?

[Almaretto]

Originally Posted by AndroidRobot

I assume this is what enables cornering lights?

On other chassis, yes. I have not yet tested on G05. I am waiting for the 45e, before I pick up mine.

[AndroidRobot]

Originally Posted by Almaretto

On other chassis, yes. I have not yet tested on G05. I am waiting for the 45e, before I pick up mine.

Hopefully they launch later this year, if you need a test mule I'll gladly volunteer since I have everything except night vision and rear seat entertainment.

is there a way to code more color options for ambient lighting? It would be great to have orange lower lighting with a blue accents for example.

[bichoo]

Originally Posted by Almaretto

On other chassis, yes. I have not yet tested on G05. I am waiting for the 45e, before I pick up mine.

So should I be the guinea pig and give it a try?

[AndroidRobot]

Originally Posted by bichoo

So should I be the guinea pig and give it a try?

Which option

[Almaretto]

Originally Posted by AndroidRobot

Hopefully they launch later this year, if you need a test mule I'll gladly volunteer since I have everything except night vision and rear seat entertainment.

is there a way to code more color options for ambient lighting? It would be great to have orange lower lighting with a blue accents for example.

If you have ENET, we can do anytime.

Yes, same parameters that exist in G01/G11/G30 exist in G05 for Ambient lighting.

[AndroidRobot]

Originally Posted by Almaretto

If you have ENET, we can do anytime.

Yes, same parameters that exist in G01/G11/G30 exist in G05 for Ambient lighting.

The cable? Yes I have one

[bichoo]

Originally Posted by Almaretto

If you have ENET, we can do anytime.

Yes, same parameters that exist in G01/G11/G30 exist in G05 for Ambient lighting.

I just connected to e-sys and you are right, I can see all the ECU's but everything is trimmed except for a couple of ECU's. I searched the ECU's for LUT_FLC_FORWARDLIGHTING_Y and C_AFS_ENA and nothing comes up.
Do you have the untrimmed files? I didn't think they were available yet? Or am I am looking in the wrong spot?

I'm using e-sys 3.27.1 and Launcher 2.80