[SLHJGB]

I know this has been beaten to death but all I could find is scattered information including different models and no full procedure on how to code the anti dazzle on laser headlights with Esys.

So here's where I'm at, I have Esys Ultra running Esys 3.40.0 and PSDZ Lite 4.37.37.

Connect via VIN using S18A_22_07_550_V_004_000_001.

Was able to read and remove 5AP. Already have 5AC and 5AZ. What's next?

Can somebody please walk me through the process on what and how to code what else and/or how to use a cheat sheet (where to copy the excel file and how to use it?)

Thank you!

[TurtleBoy]

As you mentioned, the topic has been discussed in many threads and quite a few of them contain the steps and even a video for the process.

Here is one example:

i removed 5AP then updated BDC_Body3, Kafas4, FLM (both), Dkombi.

Then I went in and changed the following:

FDL Code the following in Kafas 40F9:
COUNTRY_VARIATION Europe_RC [01]
C_FLA_BS_ENTER_THRESH Rest of world [03]
C_FLA_BS_EXIT_THRESH: Rest of world [02]

Also code the following in 40F9:
C_FLA_CC_MESSAGE_3:
CC_message_active to no_CC_message [00]
C_FLA_US_SENSITIVITY_MODE:
US to Normal [00]


https://g05.bimmerpost.com/forums/sh...0&postcount=54

And another with the coding and a video. https://g05.bimmerpost.com/forums/sh...highlight=anti