[nZtiZia]

Originally Posted by Makefish

It's interesting that so many want Wireless charging in their G05's but I'm the opposite, the phone get's so hot I would like to disable it yet still use the storage area for my phone.

Can anyone point me to either how to physically disconnect the wiring or providw a coding soluiton?

why go through all that?! place the phone face-down or increase the distance between the pad and phone (>7-8mm)

[DrX52019]

really strange, I thought this is a standard feature

[nZtiZia]

Originally Posted by DrX52019

really strange, I thought this is a standard feature

it used to be, but wireless charging has not been standard for quite a while now due to the chip shortage. it's come and gone when building through the Configurator. if one orders it then it gets deleted from the build, a credit is applied towards the purchase price

[nZtiZia]

BMWPartsPros.com l BMW OEM WIRELESS CHARGING STATION RETROFIT, UNIVERSAL https://g05.bimmerpost.com/forums/sh....php?t=1626178

[ewizzle]

Originally Posted by Hyura

I just got a 2019 x5 that only had NFC above the cup holder.

I ordered this part:
https://www.getbmwparts.com/oem-part...ce-84105a1db18

You will also need:
- BimmerCode (I have an iPhone)
- OBD Reader (I used an OBDLink CX https://www.amazon.com/OBDLink-Bimme.../dp/B08NFLL3NT)


This wireless charger is apparently a newer version of the wireless charger and it works perfectly.

In terms of installing it, I just used a pry tool and insert it on the bottom right of the nfc pad. Once I managed to fit the tip of the pry tool in the gap and lift, slide up along the right side of the pad and it should just pop right off.

Unplug the cable to the nfc pad and plug it into the new wireless charging pad. Before installing the wireless charging pad, I would recommend you code the headunit first, enabling the wireless charging pad.

Using BimmerCode and your choice of obd reader, I just changed the following settings: (Make sure you back up before coding)

1. BDC -> WcaWirelessChargingAblage->WCA_ENABLE-> aktiv
2. HU_MGU -> 3000 HMI_SPEECH -> WCA -> aktic

Code the two changes into the car, restart the car and under car settings, you should see the wireless charger option. You can enable the 'phone left behind' reminder if you want.

Verify the phone is indeed charging on the wireless charger before installing. Insert the wireless charging pad into where the old nfc tag was located. For my, the small blue light was on the right of pad.

If no coding is done, does the wireless charging still work? I'm assuming just without the car notifying to not forget the phone.

[Hyura]

From what i remember, it did work without coding the phone left behind feature.

[JMKBMWX5e]

Just incase anyone is checking out this thread and doesn't want to pay $127 for what Amazon has. I am selling mine. I got a new X5 that comes with wireless charging so I don't need it anymore.


https://g05.bimmerpost.com/forums/sh....php?t=1998250