[B530e]

Originally Posted by JimVR4

Did you try expert mode in Bimmercode? I was able to apply several different logos on my M50i.

It works for the "i" models. Not for the "e" models

[Silver.Solid]

anyone been able to update the HUD to match the M font in the dash?

[Silver.Solid]

Originally Posted by Silver.Solid

anyone been able to update the HUD to match the M font in the dash?

just bumping to see if anyone has been able to do this yet. Growing tired of the stock font.

[Silver.Solid]

Originally Posted by Silver.Solid

just bumping to see if anyone has been able to do this yet. Growing tired of the stock font.

a second bump just in case someone has sorted it.

[IFlyX5]

With the last few iterations of BimmerCode, you can code the ///M logo using the Basic Mode (no need for the Expert Mode). So instead of this code (3001 KI_PARAMETER > LOGO_SCHRIFTZUG > MSP_LOGO) you can just select INSTRUMENT CLUSTER > LAYOUT > M SPORT.

I also notice that once you code the ///M logo (or any ///M logos) to show on the infotainment screen, if you switch the driving mode to Sport/Sport Plus/Sport Individual, you get the M-color bars showing between to the "0mph" and Speed Limit icon on the bottom left of your screen (see pic below). Pretty cool.





No M-color bars with the standard screen (no ///M logo) when in Sport/Sport Plus/Sport Individual mode.

[JimVR4]

Originally Posted by IFlyX5

With the last few iterations of BimmerCode, you can code the ///M logo using the Basic Mode (no need for the Expert Mode). So instead of this code (3001 KI_PARAMETER > LOGO_SCHRIFTZUG > MSP_LOGO) you can just select INSTRUMENT CLUSTER > LAYOUT > M SPORT.

I also notice that once you code the ///M logo (or any ///M logos) to show on the infotainment screen, if you switch the driving mode to Sport/Sport Plus/Sport Individual, you get the M-color bars showing between to the "0mph" and Speed Limit icon on the bottom left of your screen (see pic below). Pretty cool.

I chose the M Performance up to 200 mph. I assume the M-color bars will show in Sport mode with only that code but if you want to customize the logo you still need the Expert Mode (I use m50i_logo). I had not noticed the M-color bars until you posted this but indeed they are there.

[IFlyX5]

Originally Posted by Silver.Solid

anyone been able to update the HUD to match the M font in the dash?

The closest match to the M font in the dash is if you code the layout to M mode. The digits on the HUD are the same font as the ones in the dash.

[yoandry]

Originally Posted by JimVR4

I chose the M Performance up to 200 mph. I assume the M-color bars will show in Sport mode with only that code but if you want to customize the logo you still need the Expert Mode (I use m50i_logo). I had not noticed the M-color bars until you posted this but indeed they are there.

When you select the MP up 200mph does anything else change with it? I want just that and keep the stock x5 m50i.

[kristal98]

Originally Posted by B530e

Hey Guys,

I have a 2021 X5 sDrive 40i (xline, Arctic Grey). When I purchased it, the car in the Instrument Cluster and Navigation screen was Jatoba Brown however I know it should match the color of my car. I went in and coded the proper color and changed the vehicle from xLine to Msport. I also changed the cluster to M Font from standard and that allowed me to add the M logo and other logos that are ordinary unavailable with stock cluster. Before and after photos are below with coding instructions. Enjoy. Also tested this on my 2020 5 Series and was successful.

M Font and Logo


-DKombi4
-Expert Mode
-3001 KI_Parameter
-AG_MPA_MSP_VIEW

MPA_ANSICHT_260_SKALA (160 MPH Speedo, M Font)
MPA_ANSICHT_330_SKALA (200 MPH Speedo, M Font)
MPA_ANSICHT (160 MPH SPeedo, Non M Font, Able to add ///M Badge)

LOGO

3001 KI_PARAMETER
LOGO_SCHRIFTZUG
MSP_LOGO

CAR COLOR AND TRIM

HU_MGU
EXPERT MODE
3000 HMI_SPEECH
TRIM_LINE
MSPORTPAKET

3000 HMI_SPEECH
VEHICLE_COLOUR

Hi mate! You havve done a great job...

[JimVR4]

Originally Posted by yoandry

When you select the MP up 200mpg does anything else change with it? I want just that and keep the stock x5 m50i.

No, you can do that one by itself.

[mikekay]

Originally Posted by IFlyX5

The closest match to the M font in the dash is if you code the layout to M mode. The digits on the HUD are the same font as the ones in the dash.

You'll quickly find out that there are bugs with the M layout... That's why Silver was asking.

[A320pilot]

Originally Posted by X54TH

The M logo is always present in all driving modes. I'm usually on Adaptive.

I'm using the OBDLinkMX+ adapter and I put the car in Diagnostic Mode before I code it. Not sure if that makes a difference.

I’m new using the OBDLINKMX+. Any chance you could explain how to do it step by step?

[X54TH]

Originally Posted by A320pilot

I’m new using the OBDLINKMX+. Any chance you could explain how to do it step by step?

You don’t need to go into Export Mode. I believe you go into Imstrument Display or Cluster and select the M version.

Not sure if that was your question or you are wondering how to connect to the ONBLINKMX+. In this case, plug the OBD in and open your Bluetooth. Select the OBD in your list and and start Bimmercode.

[akoni210]

nice, any links to all codes or how to??

[mikekay]

Originally Posted by akoni210

nice, any links to all codes or how to??

I strongly auggest you read the post in its entirety first to realize why somethings like gear selection and offset naming on cluster bother you or not.
Also you have no idea what mode you are in sport, eco, or confort etc. Was a no go for me.

[Ciulbecca]

Originally Posted by Kamranlpr2

You can code the logo individually

Hi, what function was active to visualize the car and the othe car around? thank you