[jmciver]

Originally Posted by jmciver

Haha.... Well, the 200mph speedo on my M3 doesn't really bother me (even though I don't hit triple digit speeds on a regular basis), so I don't think it will bother me on the X7 either .

Regarding displaying the drive modes in the M-Dash, I am still keeping hope alive . Seeing the picture below from the M5 Competition tells me they are there, albeit in a different spot on the cluster. The M5, just like on the G05 and G07, has individual settings for Engine, Suspension and Steering so it should be possible. Just need to figure out how to turn them on (or map them correctly). It would be great if there were an M5 Competition owner who would be willing to share their CAFD files so that a more efficient search for the correct parameters could be done.

But you gotta admit, that M-dash layout looks so much better than the standard one....

I have another question about the M-Dash....

When I coded the M-Dash display, one other element that I noticed was missing is the the rpm red line on the tach (see pic above from a 2020 M5). Has anyone seen anything in the dash coding that will allow you to match the redline of a particular engine to the M-Dash display?

[KrisV]

there has to be a way to get the driving modes back and tac in HUD while in M-dash mode...

[KrisV]

Originally Posted by samvora

Where is this option to code the fog lights to come on with the DRL'S?

I'm looking for this too. only way i can do it now is to turn OFF auto headlights and turn ON parking lights ( which are same as drl's) then turn ON fog lights. problem is you have to physically turn parking lights OFF after you're done driving or they will stay on...

[BimmerVinyl]

Hey guys, I'm sure a lot of you know more about BimmerCode then I do. I am considering getting the module and making some slight adjustments to the car. In specific, changing the fog lights to be able to turn on with the parking lights like I could do in my E70. The website says this is possible for the G05, but would any of you be able to confirm? Thanks!

[egalley]

Originally Posted by samvora

Can you share how you did it using the app?

Sorry for the late reply.

So in the App Under Body Domain Controller you'll see Fog Lights with parking lights. Mark that active.

[samvora]

Originally Posted by egalley

Sorry for the late reply.

So in the App Under Body Domain Controller you'll see Fog Lights with parking lights. Mark that active.

Huh? I don't see that option.

[egalley]

Originally Posted by samvora

Huh? I don't see that option.

Hmmm that's weird.

[James_G0540i]

Originally Posted by egalley

Hmmm that's weird.

That's the iPhone (IOS) version of Bimmercode, right?

I use Android and I don't see those fog light options either.

I find some features lag behind on the Android version - usually only a few weeks.

[KrisV]

Originally Posted by egalley

Hmmm that's weird.

I have to manually turn auto to parking lights. then manually turn off everything when i exit vehicle. is this your process as well?

[sjak92]

My old G30 had an option where seat heating would come on above a certain outside temperature. My G05 also has this but only for drivers side, not passenger. Does anyone know if it's possible to code this for the passenger.

Also, can the car be coded to auto lower on air suspension to lowest setting when you turn it off?

[LexxM3]

Originally Posted by sjak92

My old G30 had an option where seat heating would come on above a certain outside temperature. My G05 also has this but only for drivers side, not passenger. Does anyone know if it's possible to code this for the passenger.

Also, can the car be coded to auto lower on air suspension to lowest setting when you turn it off?

Yes to seat heating for passengers, including using Bimmercode in Expert Mode:

For seat heat/cool auto activation:

HU_MGU/3E52 (on G05)
- AKT_AUTO_SITZE_FOND: heizung_kuehlung (for rear seat heating and cooling)
- AKT_AUTO_SITZE_FRONT: heizung_kuehlung (for front seat heating and cooling)

Use heizung for just heating

For auto-lowering, someone has claimed they had it coded, but I don't believe they ever proved it or provided any information beyond the claim even after multiple requests to do so.

[MaCaY]

Originally Posted by sjak92

My old G30 had an option where seat heating would come on above a certain outside temperature. My G05 also has this but only for drivers side, not passenger. Does anyone know if it's possible to code this for the passenger.

Also, can the car be coded to auto lower on air suspension to lowest setting when you turn it off?

As much as i would love to be able to code car go to lowest setting i would be scared my wife park the car close to curb stop and the car would lower. Specially with front lip installed.

[X54TH]

Originally Posted by LexxM3

Yes to seat heating for passengers, including using Bimmercode in Expert Mode:

For seat heat/cool auto activation:

HU_MGU/3E52 (on G05)
- AKT_AUTO_SITZE_FOND: heizung_kuehlung (for rear seat heating and cooling)
- AKT_AUTO_SITZE_FRONT: heizung_kuehlung (for front seat heating and cooling)

Use heizung for just heating

For auto-lowering, someone has claimed they had it coded, but I don't believe they ever proved it or provided any information beyond the claim even after multiple requests to do so.

This is great! I'm going to code it now.

[Gtz1wickedest]

Anyone know if the Carly obd adapter will work with the bimmercode app?

[mitch57]

Originally Posted by LexxM3

Yes to seat heating for passengers, including using Bimmercode in Expert Mode:

For seat heat/cool auto activation:

HU_MGU/3E52 (on G05)
- AKT_AUTO_SITZE_FOND: heizung_kuehlung (for rear seat heating and cooling)
- AKT_AUTO_SITZE_FRONT: heizung_kuehlung (for front seat heating and cooling)

Use heizung for just heating

For auto-lowering, someone has claimed they had it coded, but I don't believe they ever proved it or provided any information beyond the claim even after multiple requests to do so.

I could have sworn I saw someone post this same screen shot stating that they had the climate control rules for the passenger without coding via Bimmercode. I've been trying to find this same screen shot with the OP's comment that he had it in a previous iDrive release and that it disappeared in a subsequent release. Perhaps I just misread the post.

[ElectroGeek]

something is missing to be able to set rules for all seats, I did the two listed above, I now have the menu but I can not change the temp value nor can I check box each rule.

[LexxM3]

Originally Posted by ElectroGeek

something is missing to be able to set rules for all seats, I did the two listed above, I now have the menu but I can not change the temp value nor can I check box each rule.

Hm, that set of codes was part of a bigger set. I didn't think the rest was needed, but that was likely a wrong assumption, apologies. Here is the full set — the BDC coding may well be needed as well.

Steering wheel auto heat activation:

[COLOR="Blue"]BDC_BODY3/7083 (on G05)
- LHZ_CCM_IKF: aktiv
- IKF_ENABLE: ikf_alle_sitze[/COLOR]

HU_MGU/3E52 (on G05)
- AKT_AUTO_LENKRADHEIZUNG: aktiv

Seat heat/cool auto activation:

HU_MGU/3E52 (on G05)
- AKT_AUTO_SITZE_FOND: heizung_kuehlung (for rear seat heating and cooling)
- AKT_AUTO_SITZE_FRONT: heizung_kuehlung (for front seat heating and cooling)

Use heizung for just heating

X54TH, ElectroGeek

[ElectroGeek]

Originally Posted by LexxM3

Hm, that set of codes was part of a bigger set. I didn't think the rest was needed, but could definitely be wrong. Here is the full set — the BDC coding might be needed as well.

Steering wheel auto heat activation:

BDC_BODY3/7083 (on G05)
- LHZ_CCM_IKF: aktiv
- IKF_ENABLE: ikf_alle_sitze

HU_MGU/3E52 (on G05)
- AKT_AUTO_LENKRADHEIZUNG: aktiv

For seat heat/cool auto activation:

HU_MGU/3E52 (on G05)
- AKT_AUTO_SITZE_FOND: heizung_kuehlung (for rear seat heating and cooling)
- AKT_AUTO_SITZE_FRONT: heizung_kuehlungn (for front seat heating and cooling)





Use heizung for just heating

X54TH, ElectroGeek

I can't find

BDC_BODY3/7083 (on G05)
- LHZ_CCM_IKF: aktiv
- IKF_ENABLE: ikf_alle_sitze




UPDATE

Found them in

PFlinRE
Others_1

[sjak92]

Originally Posted by LexxM3

Yes to seat heating for passengers, including using Bimmercode in Expert Mode:

For seat heat/cool auto activation:

HU_MGU/3E52 (on G05)
- AKT_AUTO_SITZE_FOND: heizung_kuehlung (for rear seat heating and cooling)
- AKT_AUTO_SITZE_FRONT: heizung_kuehlung (for front seat heating and cooling)

Use heizung for just heating

For auto-lowering, someone has claimed they had it coded, but I don't believe they ever proved it or provided any information beyond the claim even after multiple requests to do so.

How are you coding Headunit in expert mode? I can't do this on my iPad for some reason

[VTENGR]

Originally Posted by sjak92

How are you coding Headunit in expert mode? I can't do this on my iPad for some reason

Expert not available on iOS bimmercode. They're using Andriod.

[ElectroGeek]

Originally Posted by sjak92

How are you coding Headunit in expert mode? I can't do this on my iPad for some reason

I have it working now, I was able to find all 4 items to change. now if someone could just find a way to code the car with unlimited colors for ambiant lighting, and a way to set a ambiant light color to driving mode.

[sjak92]

Originally Posted by VTENGR

Expert not available on iOS bimmercode. They're using Andriod.

It is, just not for Headunit