22" HRE FF10 summer wheels and 22"snow tires

PNWM50I · 06-05-2021, 10:55 AM

Quote:

Originally Posted by oleg

Came in, liquid black. Will take better pictures soon.

did you end up choosing the same size and offset? looks sharp

oleg · 06-06-2021, 03:21 PM

Quote:

Originally Posted by PNWM50I

Quote:

Originally Posted by oleg

Came in, liquid black. Will take better pictures soon.

did you end up choosing the same size and offset? looks sharp

Quote:

Originally Posted by PNWM50I

Quote:

Originally Posted by oleg

Came in, liquid black. Will take better pictures soon.

did you end up choosing the same size and offset? looks sharp

Yes , per hre recommendation.
On those pictures theres spacers 20mm back and 15 mm front that tire shop left from my original setup.
Below is with out . Looks way better .

BMWBear · 06-13-2021, 04:51 PM

Quote:

Originally Posted by oleg

Yes , per hre recommendation.
On those pictures theres spacers 20mm back and 15 mm front that tire shop left from my original setup.
Below is with out . Looks way better .

I think it looks better with the spacers. I’m surprised HRE didn’t recommend a more aggressive offset.

Marco G · 06-15-2021, 12:31 AM

Quote:

Originally Posted by oleg

Quote:

Originally Posted by scotchy

Quote:

Originally Posted by oleg

Great set up.
After seeing pictures i have placed an order as well but in liquid black.

Nice! The gloss finish will look great.

Came in, liquid black. Will take better pictures soon.

Is yours lowered in this picture and can you send the sizes you got on the rims

oleg · 06-17-2021, 12:40 PM

Quote:

Originally Posted by Marco G

Is yours lowered in this picture and can you send the sizes you got on the rims

Fronts - 22x10.5 ET35 275/35R22
Rears - 22x11.5 ET40 315/30R22

I believe it was on lowest setting or at least one level down (I have air suspension)

Geenyc · 07-25-2021, 03:12 PM

How are the Scorpion Winters treating you?

motherkin · 07-26-2021, 07:06 PM

Any idea on what the load ratings is for HRE FF10?

PAWOLF · 09-24-2021, 02:02 PM

Love your wheels. I've been looking for those wheels for some time and even contacts HRE for them directly but they were sold out =( enjoy!

njnets21 · 09-24-2021, 02:58 PM

Ignoring appearance, which setup do you guys think is safer/better to use in winter through moderate snow? 20" A/S or 22" pirelli winters? Obviously winters are better than A/S in winter but curious if the sidewall matters. 20" has a lot more winter options but since there is a 22" option just interested in that direct comparison.

njnets21 · 12-16-2021, 08:19 PM

Quote:

Originally Posted by scotchy

Thanks, I'll get a couple of better pics when I'm out later.
I've the 742's also, in black. I like the looks of them and we get little to no snow so stuck with the 22's, it's too bad Michelin doesn't make anything in that size.
I was in the same boat with my last SUV, the Pirelli scorpion was the only tire in the factory size and if you waited until November they'd be sold out.

How would you compare your 742Ms vs the FF10s? Any noticeable difference in handling? Weight? Do you feel more confident the FF10s can withstand potholes and other hazards?

scotchy · 12-16-2021, 08:31 PM

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Thanks, I'll get a couple of better pics when I'm out later.
I've the 742's also, in black. I like the looks of them and we get little to no snow so stuck with the 22's, it's too bad Michelin doesn't make anything in that size.
I was in the same boat with my last SUV, the Pirelli scorpion was the only tire in the factory size and if you waited until November they'd be sold out.

How would you compare your 742Ms vs the FF10s? Any noticeable difference in handling? Weight? Do you feel more confident the FF10s can withstand potholes and other hazards? Does the FF10 added offset seem like too much?

How would you compare your 742Ms vs the FF10s?
Personally I prefer the gloss finish of the factory wheels, in hindsight I'd have custom ordered gloss.

Any noticeable difference in handling? Weight?
They're a bit lighter, it's not noticeable to driving or handling though.

Do you feel more confident the FF10s can withstand potholes and other hazards?
Sorry, no idea.

Does the FF10 added offset seem like too much?
It's a good balance. The wheels don't poke at all but they fill the fenders better. I've had more aggressive offsets on other cars, while I like how it looks, the paint takes a beating and gets chipped up. With these offsets I haven't had any of that.

njnets21 · 12-16-2021, 08:34 PM

Quote:

Originally Posted by scotchy

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Thanks, I'll get a couple of better pics when I'm out later.
I've the 742's also, in black. I like the looks of them and we get little to no snow so stuck with the 22's, it's too bad Michelin doesn't make anything in that size.
I was in the same boat with my last SUV, the Pirelli scorpion was the only tire in the factory size and if you waited until November they'd be sold out.

How would you compare your 742Ms vs the FF10s? Any noticeable difference in handling? Weight? Do you feel more confident the FF10s can withstand potholes and other hazards? Does the FF10 added offset seem like too much?

How would you compare your 742Ms vs the FF10s?
Personally I prefer the gloss finish of the factory wheels, in hindsight I'd have custom ordered gloss.

Any noticeable difference in handling? Weight?
They're a bit lighter, it's not noticeable to driving or handling though.

Do you feel more confident the FF10s can withstand potholes and other hazards?
Sorry, no idea.

Does the FF10 added offset seem like too much?
It's a good balance. The wheels don't poke at all but they fill the fenders better. I've had more aggressive offsets on other cars, while I like how it looks, the paint takes a beating and gets chipped up. With these offsets I haven't had any of that.

Thanks so much that's really helpful. I'm currently deciding between the black 742Ms or liquid (gloss) black FF10s. I generally prefer OEM looks but these FF10s are real tempting.

Anyone know if the center cap is the same size as OEM?

scotchy · 12-16-2021, 09:45 PM

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Thanks, I'll get a couple of better pics when I'm out later.
I've the 742's also, in black. I like the looks of them and we get little to no snow so stuck with the 22's, it's too bad Michelin doesn't make anything in that size.
I was in the same boat with my last SUV, the Pirelli scorpion was the only tire in the factory size and if you waited until November they'd be sold out.

How would you compare your 742Ms vs the FF10s? Any noticeable difference in handling? Weight? Do you feel more confident the FF10s can withstand potholes and other hazards? Does the FF10 added offset seem like too much?

How would you compare your 742Ms vs the FF10s?
Personally I prefer the gloss finish of the factory wheels, in hindsight I'd have custom ordered gloss.

Any noticeable difference in handling? Weight?
They're a bit lighter, it's not noticeable to driving or handling though.

Do you feel more confident the FF10s can withstand potholes and other hazards?
Sorry, no idea.

Does the FF10 added offset seem like too much?
It's a good balance. The wheels don't poke at all but they fill the fenders better. I've had more aggressive offsets on other cars, while I like how it looks, the paint takes a beating and gets chipped up. With these offsets I haven't had any of that.

Thanks so much that's really helpful. I'm currently deciding between the black 742Ms or liquid (gloss) black FF10s. I generally prefer OEM looks but these FF10s are real tempting.

Anyone know if the center cap is the same size as OEM?

You're welcome. Center caps are different sizes.

njnets21 · 12-16-2021, 10:22 PM

Quote:

Originally Posted by scotchy

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Thanks, I'll get a couple of better pics when I'm out later.
I've the 742's also, in black. I like the looks of them and we get little to no snow so stuck with the 22's, it's too bad Michelin doesn't make anything in that size.
I was in the same boat with my last SUV, the Pirelli scorpion was the only tire in the factory size and if you waited until November they'd be sold out.

How would you compare your 742Ms vs the FF10s? Any noticeable difference in handling? Weight? Do you feel more confident the FF10s can withstand potholes and other hazards? Does the FF10 added offset seem like too much?

How would you compare your 742Ms vs the FF10s?
Personally I prefer the gloss finish of the factory wheels, in hindsight I'd have custom ordered gloss.

Any noticeable difference in handling? Weight?
They're a bit lighter, it's not noticeable to driving or handling though.

Do you feel more confident the FF10s can withstand potholes and other hazards?
Sorry, no idea.

Does the FF10 added offset seem like too much?
It's a good balance. The wheels don't poke at all but they fill the fenders better. I've had more aggressive offsets on other cars, while I like how it looks, the paint takes a beating and gets chipped up. With these offsets I haven't had any of that.

Thanks so much that's really helpful. I'm currently deciding between the black 742Ms or liquid (gloss) black FF10s. I generally prefer OEM looks but these FF10s are real tempting.

Anyone know if the center cap is the same size as OEM?

You're welcome. Center caps are different sizes.

If you only had one 22" set, would it be the 742M or FF10?

scotchy · 12-17-2021, 10:15 AM

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Thanks, I'll get a couple of better pics when I'm out later.
I've the 742's also, in black. I like the looks of them and we get little to no snow so stuck with the 22's, it's too bad Michelin doesn't make anything in that size.
I was in the same boat with my last SUV, the Pirelli scorpion was the only tire in the factory size and if you waited until November they'd be sold out.

How would you compare your 742Ms vs the FF10s? Any noticeable difference in handling? Weight? Do you feel more confident the FF10s can withstand potholes and other hazards? Does the FF10 added offset seem like too much?

How would you compare your 742Ms vs the FF10s?
Personally I prefer the gloss finish of the factory wheels, in hindsight I'd have custom ordered gloss.

Any noticeable difference in handling? Weight?
They're a bit lighter, it's not noticeable to driving or handling though.

Do you feel more confident the FF10s can withstand potholes and other hazards?
Sorry, no idea.

Does the FF10 added offset seem like too much?
It's a good balance. The wheels don't poke at all but they fill the fenders better. I've had more aggressive offsets on other cars, while I like how it looks, the paint takes a beating and gets chipped up. With these offsets I haven't had any of that.

Thanks so much that's really helpful. I'm currently deciding between the black 742Ms or liquid (gloss) black FF10s. I generally prefer OEM looks but these FF10s are real tempting.

Anyone know if the center cap is the same size as OEM?

You're welcome. Center caps are different sizes.

If you only had one 22" set, would it be the 742M or FF10?

I'd go with the HRE's, gloss finish. I think it's a great looking wheel, and the added width of the wheels looks better than the factory ones IMO

njnets21 · 12-17-2021, 10:20 AM

Quote:

Originally Posted by scotchy

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Quote:

Originally Posted by njnets21

Quote:

Originally Posted by scotchy

Thanks, I'll get a couple of better pics when I'm out later.
I've the 742's also, in black. I like the looks of them and we get little to no snow so stuck with the 22's, it's too bad Michelin doesn't make anything in that size.
I was in the same boat with my last SUV, the Pirelli scorpion was the only tire in the factory size and if you waited until November they'd be sold out.

How would you compare your 742Ms vs the FF10s? Any noticeable difference in handling? Weight? Do you feel more confident the FF10s can withstand potholes and other hazards? Does the FF10 added offset seem like too much?

How would you compare your 742Ms vs the FF10s?
Personally I prefer the gloss finish of the factory wheels, in hindsight I'd have custom ordered gloss.

Any noticeable difference in handling? Weight?
They're a bit lighter, it's not noticeable to driving or handling though.

Do you feel more confident the FF10s can withstand potholes and other hazards?
Sorry, no idea.

Does the FF10 added offset seem like too much?
It's a good balance. The wheels don't poke at all but they fill the fenders better. I've had more aggressive offsets on other cars, while I like how it looks, the paint takes a beating and gets chipped up. With these offsets I haven't had any of that.

Thanks so much that's really helpful. I'm currently deciding between the black 742Ms or liquid (gloss) black FF10s. I generally prefer OEM looks but these FF10s are real tempting.

Anyone know if the center cap is the same size as OEM?

You're welcome. Center caps are different sizes.

If you only had one 22" set, would it be the 742M or FF10?

I'd go with the HRE's, gloss finish. I think it's a great looking wheel, and the added width of the wheels looks better than the factory ones IMO

Thanks. The added width actually makes me a little nervous because it'll stretch the tire a bit and since I'm going with the pirelli A/S it might look extra stanted on the sidewall. I prefer the bulge shape of the Conti sidewall so already sacrificing a bit going pirelli but wider rim might make that even less bulgey than it already is. Bottom line I love the way your contis look on them, not so sure how my pirelli a/s will.

Frenetic · 06-25-2022, 06:23 AM

I was talking to the HRE rep and they sent me your pictures as an example. I'm surprised how heavy they are. Did you weigh the OEM wheels? What was the weight?

Kobe4Ever · 06-25-2022, 01:17 PM

Awesome!! Major props for ordering them, there’s some thing about ordering $10,000 wheels for a car that’s only 70-80 grand that was hard for me to swallow, but that’s just me man! Your set up looks great and the offsets do look perfect!

Frenetic · 06-25-2022, 02:10 PM

Those aren't $10k. They're $3.5k for the set (I was just quoted). It's their flow form wheels.

I also agree that it looks better without the spacers. I don't like it when the offset is too aggressive.

Kobe4Ever · 06-25-2022, 02:19 PM

Quote:

Originally Posted by Frenetic

Those aren't $10k. They're $3.5k for the set (I was just quoted). It's their flow form wheels.

I also agree that it looks better without the spacers. I don't like it when the offset is too aggressive.

No kidding!? I didn’t know HRE made a wheel in that price range for a sad, I’ll have to look into it in that case lol

DeYanko · 06-25-2022, 03:32 PM

Been looking at these wheels for a while. I have a phytonic blue X5 as well. Looking to go with the liquid metal, instead of the black.

Kobe4Ever · 07-26-2022, 07:48 PM

Just ordered these in liquid metal an hour ago, now I have to find the continental tires contiPro 6- Wish me luck and I’ll have pictures in about 2 to 3 months!

07-25-2021, 03:12 PM	#50
Geenyc Registered 0 Rep 4 Posts Drives: BMW X5 M50i Join Date: Jul 2021 Location: Scarsdale iTrader: (0)	How are the Scorpion Winters treating you?
	Appreciate 0 Quote

07-26-2021, 07:06 PM	#51
motherkin Lieutenant 118 Rep 558 Posts Drives: g05 45e Join Date: May 2014 Location: Bay Area, CA iTrader: (1)	Any idea on what the load ratings is for HRE FF10?
	Appreciate 0 Quote

09-24-2021, 02:02 PM	#52
PAWOLF Private 14 Rep 84 Posts Drives: F82 Join Date: Feb 2016 Location: Queens,NY iTrader: (1)	Love your wheels. I've been looking for those wheels for some time and even contacts HRE for them directly but they were sold out =( enjoy!
	Appreciate 0 Quote

09-24-2021, 02:58 PM	#53
njnets21 Lieutenant 245 Rep 463 Posts Drives: BMW X5 Join Date: Jul 2021 Location: MD iTrader: (0)	Ignoring appearance, which setup do you guys think is safer/better to use in winter through moderate snow? 20" A/S or 22" pirelli winters? Obviously winters are better than A/S in winter but curious if the sidewall matters. 20" has a lot more winter options but since there is a 22" option just interested in that direct comparison.
	Appreciate 0 Quote

06-25-2022, 06:23 AM	#61
Frenetic PANIC! 482 Rep 823 Posts Drives: 2020 X5 M50i Join Date: Jun 2019 Location: Costco iTrader: (0)	I was talking to the HRE rep and they sent me your pictures as an example. I'm surprised how heavy they are. Did you weigh the OEM wheels? What was the weight?
	Appreciate 0 Quote

06-25-2022, 01:17 PM	#62
Kobe4Ever Private First Class 93 Rep 193 Posts Drives: 2019 X5 50i Join Date: Feb 2022 Location: St. Louis iTrader: (0)	Awesome!! Major props for ordering them, there’s some thing about ordering $10,000 wheels for a car that’s only 70-80 grand that was hard for me to swallow, but that’s just me man! Your set up looks great and the offsets do look perfect!
	Appreciate 0 Quote

06-25-2022, 02:10 PM	#63
Frenetic PANIC! 482 Rep 823 Posts Drives: 2020 X5 M50i Join Date: Jun 2019 Location: Costco iTrader: (0)	Those aren't $10k. They're $3.5k for the set (I was just quoted). It's their flow form wheels. I also agree that it looks better without the spacers. I don't like it when the offset is too aggressive.
	Appreciate 0 Quote

06-25-2022, 03:32 PM	#65
DeYanko Private 71 Rep 75 Posts Drives: BMW Join Date: Oct 2021 Location: Florida iTrader: (0)	Been looking at these wheels for a while. I have a phytonic blue X5 as well. Looking to go with the liquid metal, instead of the black.
	Appreciate 0 Quote

07-26-2022, 07:48 PM	#66
Kobe4Ever Private First Class 93 Rep 193 Posts Drives: 2019 X5 50i Join Date: Feb 2022 Location: St. Louis iTrader: (0)	Just ordered these in liquid metal an hour ago, now I have to find the continental tires contiPro 6- Wish me luck and I’ll have pictures in about 2 to 3 months!
	Appreciate 1 oleg9.00 Quote