G05 Esys Cheat Codes - V2

anuj452 · 12-25-2020, 10:52 PM

I tried below codes, and they don't seem to work on my 2019 X5

1. M Logo -- DKOMBI -- 4508 -- LOGO_SCHRIFTZUG -- msp_logo
Is it possible to add the logo without changing the dash layout
If I change the dash layout to m dashboard, then the logo shows up

2. Improve eTJA+ -- SAS3 -- 42C1 -- C_HOO_Vorhanden -- vorhanden_Standby [01]
Didn't notice any improvement in eTJA+
In my general observation, eJTA+ kicks if the current traffic speed is below 40 mph on a highway which speed limit 50 mph or more

3. Remember Last Driving Mode -- BDC_BODY3 -- 7083 -- FesLastFunctionInterval -- aktiv
I updated the dropdown value to Aktiv from nikct-aktiv
Am i supposed to update the werte to 255 directly to make it work ?

Silver.Solid · 12-26-2020, 03:28 PM

Quote:

Originally Posted by anuj452

I tried below codes, and they don't seem to work on my 2019 X5

1. M Logo -- DKOMBI -- 4508 -- LOGO_SCHRIFTZUG -- msp_logo
Is it possible to add the logo without changing the dash layout
If I change the dash layout to m dashboard, then the logo shows up

2. Improve eTJA+ -- SAS3 -- 42C1 -- C_HOO_Vorhanden -- vorhanden_Standby [01]
Didn't notice any improvement in eTJA+
In my general observation, eJTA+ kicks if the current traffic speed is below 40 mph on a highway which speed limit 50 mph or more

3. Remember Last Driving Mode -- BDC_BODY3 -- 7083 -- FesLastFunctionInterval -- aktiv
I updated the dropdown value to Aktiv from nikct-aktiv
Am i supposed to update the werte to 255 directly to make it work ?

'19 G05 here (oct 2018 build)

1. First one works for me (via bimmercode) ... just change the settings with the default gauges in place. You need to re-adjust when you change the gauges style to M and it will memories the logo preference in my experience.

2. wish i can enable eJTA+ in my country.

3. worked for me on bimmercode.

anuj452 · 12-27-2020, 09:02 AM

I used Esys via LauncherPro...
Could be a mapping issue with psdzdata files in LauncherPro

Good to know the codes work, Thanks
will take another look to see what the issue is

Quote:

Originally Posted by Silver.Solid

'19 G05 here (oct 2018 build)

1. First one works for me (via bimmercode) ... just change the settings with the default gauges in place. You need to re-adjust when you change the gauges style to M and it will memories the logo preference in my experience.

2. which i can enable eJTA+ in my country.

3. worked for me on bimmercode.

menace33 · 12-30-2020, 08:29 AM

Does anyone know where can I find psdzdafa containing S18A_20_11_545?

shawnsheridan · 12-30-2020, 08:55 AM

Quote:

Originally Posted by menace33

Does anyone know where can I find psdzdafa containing S18A_20_11_545?

PM sent.

menace33 · 01-11-2021, 07:53 AM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thanks a lot!

willting · 01-14-2021, 03:00 AM

Quote:

Originally Posted by Trojanlaw

It's not that simple. Search the f15 forum in n coding. There are some great videos posted by Opasha. Then you can use my list easily.

Excellent, Thank You!!

Is it possible to adjust the speed of the anti dazzle function?

marcosg · 02-27-2021, 08:00 PM

Quote:

Originally Posted by anuj452

I used Esys via LauncherPro...
Could be a mapping issue with psdzdata files in LauncherPro

Good to know the codes work, Thanks
will take another look to see what the issue is

Did you manage to get FesLastFunctionInterval (remembering last driving mode) to work?

anuj452 · 03-18-2021, 09:10 PM

No it did not work for me

Quote:

Originally Posted by marcosg

Did you manage to get FesLastFunctionInterval (remembering last driving mode) to work?

Fpgiuliano · 03-18-2021, 09:21 PM

Quote:

Originally Posted by anuj452

I tried below codes, and they don't seem to work on my 2019 X5

1. M Logo -- DKOMBI -- 4508 -- LOGO_SCHRIFTZUG -- msp_logo
Is it possible to add the logo without changing the dash layout
If I change the dash layout to m dashboard, then the logo shows up

Hi
Don’t work because in ag_mpa_msp_view (BimmerCode app) u have ag_ansicht

For who want standard tachometer and font and want only add ///M badge, needs to code also this

—>DKOMBI
AG_MPA_MSP_VIEW
MPA_ANSICHT (160 MPH SPeedo, Non M Font, Able to add ///M Badge)

And then this
LOGO

3001 KI_PARAMETER
LOGO_SCHRIFTZUG
MSP_LOGO

bobbis1 · 04-01-2021, 07:23 PM

Can anyone tell me what VARIABLE LIGHT DISTRIBUTION coding does? I have read threads about the anti-dazzle coding but am still a bit confused on VLD.

shawnsheridan · 04-01-2021, 07:27 PM

Quote:

Originally Posted by bobbis1

Can anyone tell me what VARIABLE LIGHT DISTRIBUTION coding does? I have read threads about the anti-dazzle coding but am still a bit confused on VLD.

VLD (Variable Light Distribution) is an anti-dazzle function of the low-beam.

bobbis1 · 04-01-2021, 08:43 PM

Quote:

Originally Posted by shawnsheridan

VLD (Variable Light Distribution) is an anti-dazzle function of the low-beam.

Any videos of this working or is it just an absolute should code once you’re in there?

shawnsheridan · 04-01-2021, 08:47 PM

Quote:

Originally Posted by bobbis1

Any videos of this working or is it just an absolute should code once you’re in there?

No idea. I won't code it myself, nor Glare Free High Beams.

bobbis1 · 04-01-2021, 09:32 PM

Quote:

Originally Posted by shawnsheridan

No idea. I won't code it myself, nor Glare Free High Beams.

I just did the glare free high beams- what’s the reason not to code it?

shawnsheridan · 04-01-2021, 10:26 PM

Quote:

Originally Posted by bobbis1

I just did the glare free high beams- what’s the reason not to code it?

If it requires FDL Coding, it is not an OEM solution, and is known not to work 100% as it should.

larrylam646 · 04-02-2021, 05:27 AM

Quote:

Originally Posted by bobbis1

Can anyone tell me what VARIABLE LIGHT DISTRIBUTION coding does? I have read threads about the anti-dazzle coding but am still a bit confused on VLD.

I have not found any reference yet for G05 VLD but take a look at this link for details on VLD for older BMW platforms - http://bmwgeek.blogspot.com/2017/08/...tribution.html

Larry

bobbis1 · 04-02-2021, 12:49 PM

Quote:

Originally Posted by larrylam646

I have not found any reference yet for G05 VLD but take a look at this link for details on VLD for older BMW platforms - http://bmwgeek.blogspot.com/2017/08/...tribution.html

Larry

Thanks I did it last night- could definitely see it working a bit in my parking garage but couldn’t tell much on roads- Manhattan too bright already.

sripathinishanth · 04-16-2021, 05:13 PM

Any codes for TLA?

anuj452 · 04-24-2021, 09:37 AM

Thanks, its working now for me, below is what I coded

—>DKOMBI
AG_MPA_MSP_VIEW
MSP_ANSICHT

LOGO_SCHRIFTZUG
MSP_LOGO

Quote:

Originally Posted by Fpgiuliano

Hi
Don’t work because in ag_mpa_msp_view (BimmerCode app) u have ag_ansicht

For who want standard tachometer and font and want only add ///M badge, needs to code also this

—>DKOMBI
AG_MPA_MSP_VIEW
MPA_ANSICHT (160 MPH SPeedo, Non M Font, Able to add ///M Badge)

And then this
LOGO

3001 KI_PARAMETER
LOGO_SCHRIFTZUG
MSP_LOGO

kubax86 · 04-24-2021, 11:21 AM

Quote:

Originally Posted by sripathinishanth

Any codes for TLA?

They are posted on the forum already.
You need to have at least 20-07 software and E-SysX with latest mappings. Not possible with Bimmercode or free version of Launcher.

Feel free to contact if you need assistance with it.

mlurker · 11-11-2021, 10:09 PM

What does color coding in the document means and why some features are being repeated?

12-25-2020, 10:52 PM	#23
anuj452 2019 X5 40i 115 Rep 226 Posts Drives: 2019 X5 40i Join Date: Feb 2019 Location: NJ iTrader: (0)	I tried below codes, and they don't seem to work on my 2019 X5 1. M Logo -- DKOMBI -- 4508 -- LOGO_SCHRIFTZUG -- msp_logo Is it possible to add the logo without changing the dash layout If I change the dash layout to m dashboard, then the logo shows up 2. Improve eTJA+ -- SAS3 -- 42C1 -- C_HOO_Vorhanden -- vorhanden_Standby [01] Didn't notice any improvement in eTJA+ In my general observation, eJTA+ kicks if the current traffic speed is below 40 mph on a highway which speed limit 50 mph or more 3. Remember Last Driving Mode -- BDC_BODY3 -- 7083 -- FesLastFunctionInterval -- aktiv I updated the dropdown value to Aktiv from nikct-aktiv Am i supposed to update the werte to 255 directly to make it work ? __________________ 2019 X5 40i (Mar-2019 Build) iDrive ver -- 03/2022.30
	Appreciate 0 Quote

12-30-2020, 08:29 AM	#26
menace33 Private First Class 47 Rep 108 Posts Drives: 2020 BMW X5 45e Join Date: Aug 2020 Location: Belgrade, Serbia iTrader: (0) Garage List 2019 Audi TT 45TFSI [0.00] 2019 Mercedes A180 [0.00] 2020 BMW X5 xDrive45e [0.00]	Does anyone know where can I find psdzdafa containing S18A_20_11_545?
	Appreciate 0 Quote

04-01-2021, 07:23 PM	#33
bobbis1 Private First Class 128 Rep 196 Posts Drives: M5 Join Date: Oct 2010 Location: NJ iTrader: (0)	Can anyone tell me what VARIABLE LIGHT DISTRIBUTION coding does? I have read threads about the anti-dazzle coding but am still a bit confused on VLD.
	Appreciate 0 Quote

04-16-2021, 05:13 PM	#41
sripathinishanth Registered 0 Rep 2 Posts Drives: BMW 2020 X5 xDrive40i Join Date: Apr 2021 Location: CA iTrader: (0)	Any codes for TLA?
	Appreciate 0 Quote

11-11-2021, 10:09 PM	#44
mlurker First Lieutenant 146 Rep 337 Posts Drives: BMW G05 X5 45e Join Date: Aug 2021 Location: Houston, Texas iTrader: (0)	What does color coding in the document means and why some features are being repeated?
	Appreciate 0 Quote