Looking for 22" aftermarket quality wheels

Afjeld · 04-14-2021, 02:03 PM

I am looking for some new wider 22" aftermarket quality wheels 🤔

I already have 22" 742M Jet Black (winter) and 22" 742M Bicolor (summer).

Any advise?

bforbrian · 04-14-2021, 08:47 PM

What's your budget? And define quality? Anything better than low pressure cast?

Flow-formed/hybrid-forged will run about $3500, and forged will run anywhere from $4000 to as high as $7-8K.

Pro55 · 04-15-2021, 03:50 AM

I don’t know of any off the shelf aftermarket that are wider than the 10.5 you currently have unless you go to a different width. Ie 335/25/22.
Or go for a 23/24 inch . Someone posted recently their X5 with 24 inch and it looked good but not sure if you could potentially get rubbing.

Afjeld · 04-15-2021, 04:19 AM

Quote:

Originally Posted by bforbrian

What's your budget? And define quality? Anything better than low pressure cast?

Flow-formed/hybrid-forged will run about $3500, and forged will run anywhere from $4000 to as high as $7-8K.

Thanks! Do you have any examples? I've the budget for the right wheel 😉

Had wheels from AC Schnitzer on my two latest BMWs, but they have no one I like for the G05.

bhe · 04-15-2021, 07:48 AM

I have BJ-wheels, forged 2 pieces wheels. you can choose your own specs ;-)

https://www.bj-wheels.com/en

Have them only for a month of 2 and did not that many km.

Until now I'm satisfied.

Only thing.. I had to wait +- 3-4 months.
Price was less then € 4K (without tires)

Afjeld · 04-15-2021, 08:19 AM

Quote:

Originally Posted by BYEIL

I have 22x12 325/35/22 and 22x10.5 285/40/22 on my X7 so it may be possible to go wide on an X5. I have Vossen wheels which took about 8 weeks from order to delivery.

Thanks! Can you drop a pic here? 😎

scotchy · 04-15-2021, 11:39 AM

I just put my summers back on. Off the shelf HRE 22x10.5 and 22x11.5. You can see the full specs and more pics of them on my post a couple down.

With these offsets, I don't think you could do a wider tire up front without rubbing. Depending on the look you're after you could push out another half inch in the rear and go with 12" wide. Up front I think 11" wide would poke too much.

Afjeld · 04-15-2021, 12:13 PM

Quote:

Originally Posted by scotchy

I just put my summers back on. Off the shelf HRE 22x10.5 and 22x11.5. You can see the full specs and more pics of them on my post a couple down.

With these offsets, I don't think you could do a wider tire up front without rubbing. Depending on the look you're after you could push out another half inch in the rear and go with 12" wide. Up front I think 11" wide would poke too much.

Thanks! Looks good. I'm thinking of keeping the original tires and go for wider rims front and back, without new wheel arches!

BMWBear · 04-15-2021, 04:31 PM

Quote:

Originally Posted by Afjeld

Thanks! Can you drop a pic here? 😎

Bandit-X · 04-16-2021, 11:41 AM

Quote:

Originally Posted by bhe

I have BJ-wheels, forged 2 pieces wheels. you can choose your own specs ;-)

https://www.bj-wheels.com/en

Have them only for a month of 2 and did not that many km.

Until now I'm satisfied.

Only thing.. I had to wait +- 3-4 months.
Price was less then € 4K (without tires)

Looks brutal man. Your car looks much lower than mine. What springs you got?🤔🤔🤔🤔

Afjeld · 04-16-2021, 12:42 PM

Quote:

Originally Posted by Bandit-X

Looks brutal man. Your car looks much lower than mine. What springs you got?🤔🤔🤔🤔

It's adjustable air suspension. All 45e has it as standard. Here's mine on winter tires.

bhe · 04-16-2021, 01:11 PM

Quote:

Originally Posted by Afjeld

Quote:

Originally Posted by Bandit-X

Looks brutal man. Your car looks much lower than mine. What springs you got?

It's adjustable air suspension. All 45e has it as standard. Here's mine on winter tires.

indeed air suspension.but also has lowering links. only lowered half an inch with it.

Wtfitzvi · 05-09-2021, 01:31 PM

Quote:

Originally Posted by scotchy

I just put my summers back on. Off the shelf HRE 22x10.5 and 22x11.5. You can see the full specs and more pics of them on my post a couple down.

With these offsets, I don't think you could do a wider tire up front without rubbing. Depending on the look you're after you could push out another half inch in the rear and go with 12" wide. Up front I think 11" wide would poke too much.

Hey scotchy I sent you a DM

Afjeld · 05-10-2021, 08:05 AM

I'm now on the OEM 742M bicolor, but looking for something else; 10/11,5 x 22".

Does anyone have 22" rims for sale? 🤩

xDrivex5 · 05-10-2021, 08:09 AM

I think these HRE FF10´s are just perfect for G05

Wtfitzvi · 05-13-2021, 04:16 PM

Quote:

Originally Posted by Marko_1

I think these HRE FF10´s are just perfect for G05

Been trying to buy a set for the past couple days and no one has it in stock.

r33_RGSport · 05-13-2021, 08:50 PM

Here is mine with Vossen HF5 22".
It is one of the most popular style.
I've sold many of them to X3M guys and a few G05 X5 guys.

Afjeld · 05-14-2021, 10:03 AM

Quote:

Originally Posted by r33_RGSport

Here is mine with Vossen HF5 22".
It is one of the most popular style.
I've sold many of them to X3M guys and a few G05 X5 guys.

Looks good!! What widths and ET do you have on those rims?

I'm looking on a set of 22" HF-2 Gloss Black for my all black 45e.

Name: Vossen-HF-2-Wheel-C25-Gloss-Black-Hyrbid-Forged-Series-©-Vossen-Wheels-2018-1009-1047x698.jpg
Views: 2122
Size: 110.8 KB

Name: Vossen-HF-2-Wheel-C25-Gloss-Black-Hyrbid-Forged-Series-©-Vossen-Wheels-2018-1009-1047x698.jpg
Views: 2122
Size: 110.8 KB

r33_RGSport · 05-14-2021, 10:13 AM

Quote:

Originally Posted by Afjeld

Looks good!! What widths and ET do you have on those rims?

I'm looking on a set of 22" HF-2 Gloss Black for my all black 45e.

Attachment 2603664

That'll looks good.

I believe my setup is:
22x9.5 +15
22x10.5 +20

Afjeld · 05-14-2021, 10:14 AM

Quote:

Originally Posted by r33_RGSport

That'll looks good.

I believe my setup is:
22x9.5 +15
22x10.5 +20

Thanks! Standard ET + 15/20 spacers?

r33_RGSport · 05-14-2021, 10:42 AM

Quote:

Originally Posted by Afjeld

Thanks! Standard ET + 15/20 spacers?

No, that's the offset +15 front and +20 rear.

Afjeld · 05-14-2021, 12:20 PM

Quote:

Originally Posted by r33_RGSport

No, that's the offset +15 front and +20 rear.

WOW! That’s not allowed in Europe.

04-14-2021, 02:03 PM	#1
Afjeld Second Lieutenant 1008 Rep 293 Posts Drives: G81 M3 CT & G26 i4 M50 Join Date: Oct 2015 Location: Norway iTrader: (0)	Looking for 22" aftermarket quality wheels I am looking for some new wider 22" aftermarket quality wheels 🤔 I already have 22" 742M Jet Black (winter) and 22" 742M Bicolor (summer). Any advise? Attached Images
	Appreciate 0 Tweet Quote

04-14-2021, 08:47 PM	#2
bforbrian Captain 723 Rep 704 Posts Drives: 2020 BMW X5 x40i Join Date: Jul 2016 Location: New York, NY iTrader: (0)	What's your budget? And define quality? Anything better than low pressure cast? Flow-formed/hybrid-forged will run about $3500, and forged will run anywhere from $4000 to as high as $7-8K.
	Appreciate 1 Afjeld1008.00 Quote

04-15-2021, 03:50 AM	#3
Pro55 Second Lieutenant 110 Rep 236 Posts Drives: BMW X5 G05 30d Join Date: Oct 2019 Location: Midlands UK iTrader: (0)	I don’t know of any off the shelf aftermarket that are wider than the 10.5 you currently have unless you go to a different width. Ie 335/25/22. Or go for a 23/24 inch . Someone posted recently their X5 with 24 inch and it looked good but not sure if you could potentially get rubbing.
	Appreciate 0 Quote

04-15-2021, 07:48 AM	#5
bhe Private First Class 105 Rep 182 Posts Drives: X5 G05 45e Join Date: Mar 2015 Location: Belgium iTrader: (0)	I have BJ-wheels, forged 2 pieces wheels. you can choose your own specs ;-) https://www.bj-wheels.com/en Have them only for a month of 2 and did not that many km. Until now I'm satisfied. Only thing.. I had to wait +- 3-4 months. Price was less then € 4K (without tires) Attached Images
	Appreciate 2 Afjeld1008.00 GunmetalR569.50 Quote

04-15-2021, 11:39 AM	#7
scotchy First Lieutenant 210 Rep 336 Posts Drives: 2020 X5 M50i Join Date: May 2014 Location: Canada iTrader: (0)	I just put my summers back on. Off the shelf HRE 22x10.5 and 22x11.5. You can see the full specs and more pics of them on my post a couple down. With these offsets, I don't think you could do a wider tire up front without rubbing. Depending on the look you're after you could push out another half inch in the rear and go with 12" wide. Up front I think 11" wide would poke too much. Attached Images
	Appreciate 1 xDrivex552.50 Quote

05-10-2021, 08:05 AM	#14
Afjeld Second Lieutenant 1008 Rep 293 Posts Drives: G81 M3 CT & G26 i4 M50 Join Date: Oct 2015 Location: Norway iTrader: (0)	I'm now on the OEM 742M bicolor, but looking for something else; 10/11,5 x 22". Does anyone have 22" rims for sale? 🤩 Attached Images
	Appreciate 0 Quote

05-10-2021, 08:09 AM	#15
xDrivex5 Private First Class 53 Rep 111 Posts Drives: BMW 530D G31 LCi M-sport Join Date: Oct 2020 Location: Est iTrader: (0)	I think these HRE FF10´s are just perfect for G05
	Appreciate 0 Quote

05-13-2021, 08:50 PM	#17
r33_RGSport General 12971 Rep 18,716 Posts Drives: G09 XM, G05 X5 40, 991.2 T Join Date: Oct 2009 Location: So. Cal iTrader: (6)	Here is mine with Vossen HF5 22". It is one of the most popular style. I've sold many of them to X3M guys and a few G05 X5 guys. Attached Images __________________ Email:sales@rgsport.com \| IG:RGSport_USA \| Web:RGSportShop.com PM for Everyday DEALS!! MSS • iSweep • RaceChip • Sterckenn • AutoTecknic • Akrapovic • Vossen Wheels • Eventuri Active Autowerke • KW • H&R • Ohlins • Remus • and more...
	Appreciate 1 Afjeld1008.00 Quote