[Fpgiuliano]

Originally Posted by PaoloV

it also requires this . where can I find it . Thank you

U need to accept private message on ur profile…

[PaoloV]

Originally Posted by Fpgiuliano

U find esys setup it in bu installation folder
For cable, u need enet- odb2 cable

WARNING : But if have no experience in coding I reccomend that you first look for guides around forums because otherwise you risk doing serious damage to ur car

.
sure I don't touch anything . Priam I read alternatively I ask those who can do even remotely pc. Thank you

[PaoloV]

Originally Posted by Fpgiuliano

U need to accept private message on ur profile…

I can't find messages in my profile .is disabled

[PaoloV]

Originally Posted by Bambazonke

I have enabled the coding but TLA still does not work here as the Aus/NZ map database does not contain TLA location data which is a prerequisite for it to work. If you leave the "Consider Traffic Lights" box unticked the system will not show an error after the car is shut down and restarted.

I live in hope that with the advent of ID8 and more advanced navigation systems the map database will one day include it for all previous versions. Emergency Corridor option does not work either not sure why but probably the same reason as TLA.

UCC works well on the open road but not that great around town and has certainly saved me a few $$$ in speeding fines.

PS Anybody who wants my cheat sheet please PM me their email address so I can send them a copy

I can't send PM yet if you can send it to me too thanks. paolo.valli@hotmail.com

[PaoloV]

Originally Posted by Fpgiuliano

U find esys setup it in bu installation folder
For cable, u need enet- odb2 cable

WARNING : But if have no experience in coding I reccomend that you first look for guides around forums because otherwise you risk doing serious damage to ur car

Should this be correct?

[AndreiBes]

Originally Posted by Fpgiuliano

Hi,
There is a problem on mapping .
BimmerUtility support will fix the problem on the next release (I wrote them)

Stay tuned !

that's is a great news, will wait for the next release then

[kirky27]

Originally Posted by Bambazonke

Do you have copies of your old ncd files prior to update? If so use the NCD Compare option in BimmerUtility to check your coding.
It sounds like one of the land mask values might NOT be correct ie (FF,FF,FF,FF) or you have a syntax error in your FDL coding values. One minor syntax error is enough to prevent it from working

Could you please send me your cheat sheet for the G05?

Also is it possible to code flashing brake lights/Euro Anti Dazzle on 2021 G05 with Bimmercode?

I’m new user so I can’t PM you.
05.brains_magnum@icloud.com

Thanks.

[Bambazonke]

Originally Posted by kirky27

Could you please send me your cheat sheet for the G05?

Also is it possible to code flashing brake lights/Euro Anti Dazzle on 2021 G05 with Bimmercode?

I’m new user so I can’t PM you.
05.brains_magnum@icloud.com

Thanks.

Cheat sheet sent.
I have a Euro spec X5 so not familiar with anti dazzle coding for US spec models. I would think you will need BimmerUtility or ESysPlus/Ultra. Bimmercode does not give access to all ECU's in the vehicle but not 100% certain perhaps some US owners that have done the coding can confirm my assumption.

[Fpgiuliano]

Originally Posted by AndreiBes

that's is a great news, will wait for the next release then

Hi,
BU is update !
Now they fix ucc problems!!!
Also update to 4.37.20 map

[hotaek0604]

Originally Posted by Bambazonke

Cheat sheet sent.
I have a Euro spec X5 so not familiar with anti dazzle coding for US spec models. I would think you will need BimmerUtility or ESysPlus/Ultra. Bimmercode does not give access to all ECU's in the vehicle but not 100% certain perhaps some US owners that have done the coding can confirm my assumption.

Friend, is it g08 ix3
Can you share the cheat?
I can't play pm because I'm a new member

e-sys

hotaek0604@naver.com

thanks

[IamBanksy]

Can you please send me the cheat sheet as well my friend ? powerfulpc1@gmail.com

[BillyShakes]

Hi all, hope you all had/are having a great festive period!

UK owner here. I’m interested in getting the most out of my G05 and naturally Bimmer Code and Bimmer Utility has peaked my interest, however… I don’t have DAP so I fear a lot of the best features are just impossible for me to code. I do have ACC with stop & go so I have some of the kit just not the cameras I believe? Could anyone point me in the direction of what would be available for me to code please? I’m most interested in the aTLA, aSLA and any other autonomy that may be available but a full list of what would be amazing also.

Thank you in advance for any help

[Bambazonke]

Originally Posted by BillyShakes

Hi all, hope you all had/are having a great festive period!

UK owner here. I’m interested in getting the most out of my G05 and naturally Bimmer Code and Bimmer Utility has peaked my interest, however… I don’t have DAP so I fear a lot of the best features are just impossible for me to code. I do have ACC with stop & go so I have some of the kit just not the cameras I believe? Could anyone point me in the direction of what would be available for me to code please? I’m most interested in the aTLA, aSLA and any other autonomy that may be available but a full list of what would be amazing also.

Thank you in advance for any help

Unfortunately you require DAP for the features you are interested in. Do you have heated seats you can automate them to turn on at a certain temp on older models? It may be standard on new MY21 plus models

Is "anticipation" activated in your cruise control options? I think that can be activated without DAP as it uses the speed sign data in the map database. There are few other cosmetic changes you can make to the instrument panel and head unit.
If you are keen to proceed to the next level I would suggest purchasing a cable and Bimmer Utility software. Bimmercode which is a smartphone App is very good for basic cosmetic coding has limitations as it does not have access to all the car's ECU's for safety reasons. It's backup system is not great and requires in my opinion the user to make notes on changes he or she does. Either way get a std OBD enet cable for Bimmer Utility and a smart phone/pad cable adapter if you opt for Bimmercode. It is a lot quicker and more reliable than using Wifi or Bluetooth Adapters

[BillyShakes]

Originally Posted by Bambazonke

Unfortunately you require DAP for the features you are interested in. Do you have heated seats you can automate them to turn on at a certain temp on older models? It may be standard on new MY21 plus models

Is "anticipation" activated in your cruise control options? I think that can be activated without DAP as it uses the speed sign data in the map database. There are few other cosmetic changes you can make to the instrument panel and head unit.
If you are keen to proceed to the next level I would suggest purchasing a cable and Bimmer Utility software. Bimmercode which is a smartphone App is very good for basic cosmetic coding has limitations as it does not have access to all the car's ECU's for safety reasons. It's backup system is not great and requires in my opinion the user to make notes on changes he or she does. Either way get a std OBD enet cable for Bimmer Utility and a smart phone/pad cable adapter if you opt for Bimmercode. It is a lot quicker and more reliable than using Wifi or Bluetooth Adapters

I suspected that may be the case I have the ability to auto turn on the heated seats when temps hit below a predefined temp already so covered there.

I’m not sure about the anticipation setting for cruise control, what does that do? Is it where you just need to hit the “set” button for the cruise control to change to the upcoming speed limit? If so, I do have that turned on!
I always thought the real estate on the cockpit screen was a bit wasted with very limited views available so would be good if I Callum’s add some further options to that.

Sounds like Bimmer Utility is the way to go with an OBD cable then. Thanks for your help, appreciate it.

[aamri111]

Originally Posted by Bambazonke

Pm me your email address as I have a cheat sheet specifically for G05 that includes coding for the fourth ECU & more

Hello. if you kindly share the cheat sheet? does it work on G06 X6?
aamri111@gmail.com

[temoore48]

I would really appreciate your G05 cheatsheet as well. temoore48@gmail. Thanks in advance!

[mjkasper]

I would like a copy of the G05 cheat sheet, please.

[Shawzy44]

I would love the chest sheet. Kevin_d_shaw@mac.com Thanks!!

[JackyBMWD]

Originally Posted by Bambazonke

Pm me your email address as I have a cheat sheet specifically for G05 that includes coding for the fourth ECU & more

Hi Expert, I'm new user and have Bimmer utility. I tried open feature for a TLA on my G01 '2022 like post pic. However, I can't find the check box for enable traffic light. Any suggedtion? G05 Table is compatible with G01? If yes,could you please pm to me? Much thanks

[AndreiBes]

Hello, does anyone have a copy of the G05 cheat sheet, please?

[atlas]

I also would appreciate a copy of the G05 cheat sheet, if possible. Thanks!

[mandomedic122]

I would also like the cheat sheet if anyone can provide it. mandomedic122@att.net