10-19-2022, 06:56 PM | #1 |
Second Lieutenant
122
Rep 208
Posts |
10.5x21 ET32 with 285/40/21 All Around
Sorry another will it fit thread. I've spent way too much time on this subject........This vehicle is tough to pick wheels/tires for.
Looking for opinions or concrete data on whether 10.5x21 ET32 with 285/40/21 at all four corners will work. This gets me a Micheline Pilot Sport 4 tire, witch is ideal on a TSW flow forged Bathurst wheel, which is a great value for a quality wheel. The rear should be ok, but the front will be 7.7mm closer to the front than my OEM 21's that I will need to get rid off, because there are no all season performance tires for these wheels. Thanks! Last edited by slicky; 10-19-2022 at 07:42 PM.. |
10-21-2022, 01:08 PM | #2 |
Second Lieutenant
122
Rep 208
Posts |
Not getting any traction. Let's try another angle...
Can someone please measure the distance between the stock 21" 741m wheel and the strut. Thank you! |
Appreciate
0
|
02-15-2023, 11:15 AM | #3 |
New Member
0
Rep 5
Posts |
You should be fine. Well hoping so at least since I just ordered a 10inch wide square setup on 20's and using same calculator I will be 17.7mm closer to the strut. Using a snap gauge it looks like I have around 25-30mm with factory 9 inch wheels.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|