[Keith's Bimmer]

Finally received all my parts from Maxton and had them installed:

1. Front Splitter V.2
2. Side Skirt Diffusers
3. Central Rear Splitter w/ Vertical Bars
4. Spoiler Cap

What do you think?

[TTTTTTT]

I’m a fan. Looks great. I’ve had Maxton Design on my last few cars and especially like them as they offer gloss black. Fit is always on point, easy to install and customer service is always responsive. It’s also at a price point where you’re not hating life having to replace the front splitter when you’ve cracked it from taking a steep decline you’re not familiar with which has happened to me in the past.

I will also add….I’ve always taken the logos off. Personal preference but I think it gives it a cleaner look. They are easy to peel off (usually a fingernail) and some cleaner to remove adhesive residue.

[Samurai of 2day]

Looks great! Especially against the gravity gray. Aggressive presence which I always appreciated about the X6M, now with your mods, even more so.

[MADBMWX5MC]

that looks very good, big fan of the side skirt diffusers

[fallen]

Looks great; thank you for sharing!
The only thing that would make it look even better is lowering. 😉

[Blizzle]

Car and mods look great! I've been wanting to do the Maxton Design front, sideskirts, and rear diffuser as well.

How'd the installation go?

I had concerns over the rear diffuser. I've tried comparing photos of my 2021 F96 and the website to see how it'd install. The backup sensors and OEM diffuser look like 1 piece. Did the Maxton kit come with everything you needed (besides tape/screws?) Any other installation issues? TIA!

[Condorll]

Texas needs to get rid of the front plate! Why can some states do without it and others insist on a front plate?

[Keith's Bimmer]

Originally Posted by Blizzle

Car and mods look great! I've been wanting to do the Maxton Design front, sideskirts, and rear diffuser as well.

How'd the installation go?

I had concerns over the rear diffuser. I've tried comparing photos of my 2021 F96 and the website to see how it'd install. The backup sensors and OEM diffuser look like 1 piece. Did the Maxton kit come with everything you needed (besides tape/screws?) Any other installation issues? TIA!

Install went exceptionally well, shop installed similar kits on BMWs in the past. I decided to go with 3M bonding adhesive (not included) and screws (included) for the front splitter, side skirt diffusers, and central rear splitter. I was concerned that I would lose the kick power liftgate, but I did not. Still works with the central rear splitter in place.

If you go to the bottom of the page for Maxton Design, they have the installation manuals for the parts "https://maxtondesign.com/Manuals-cabout-eng-32.html".

[Keith's Bimmer]

Originally Posted by TTTTTTT

I’m a fan. Looks great. I’ve had Maxton Design on my last few cars and especially like them as they offer gloss black. Fit is always on point, easy to install and customer service is always responsive. It’s also at a price point where you’re not hating life having to replace the front splitter when you’ve cracked it from taking a steep decline you’re not familiar with which has happened to me in the past.

I will also add….I’ve always taken the logos off. Personal preference but I think it gives it a cleaner look. They are easy to peel off (usually a fingernail) and some cleaner to remove adhesive residue.

Excellent suggestion for the logos. Thanks

[Keith's Bimmer]

Originally Posted by Samurai of 2day

Looks great! Especially against the gravity gray. Aggressive presence which I always appreciated about the X6M, now with your mods, even more so.

THANKS!

[Keith's Bimmer]

Originally Posted by MADBMWX5MC

that looks very good, big fan of the side skirt diffusers

THANKS!

[Keith's Bimmer]

Originally Posted by fallen

Looks great; thank you for sharing!
The only thing that would make it look even better is lowering. 😉

THANKS!

[Keith's Bimmer]

Originally Posted by Condorll

Texas needs to get rid of the front plate! Why can some states do without it and others insist on a front plate?

[S2000M5]

I have the exact same color combo (dravit / midrand) only in X5M

[Blizzle]

Nice! Not sure how I missed that link on their page, but thanks for the info.

Originally Posted by Keith's Bimmer

Install went exceptionally well, shop installed similar kits on BMWs in the past. I decided to go with 3M bonding adhesive (not included) and screws (included) for the front splitter, side skirt diffusers, and central rear splitter. I was concerned that I would lose the kick power liftgate, but I did not. Still works with the central rear splitter in place.

If you go to the bottom of the page for Maxton Design, they have the installation manuals for the parts "https://maxtondesign.com/Manuals-cabout-eng-32.html".

[cfm56d7b]

Outstanding outcome. Great car!

[992seefouress]

Loving how this came out!!

[X5MBlue]

that looks absolutely gorgeous…. what color is that Dravit Grey ?

[Keith's Bimmer]

Originally Posted by X5MBlue

that looks absolutely gorgeous…. what color is that Dravit Grey ?

Yes, it is. Thanks

[Keith's Bimmer]

Originally Posted by cfm56d7b

Outstanding outcome. Great car!

Thanks!

[Keith's Bimmer]

Originally Posted by 992seefouress

Loving how this came out!!

Thanks!