Front lip

bhe · 04-22-2020, 03:45 PM

Quote:

Originally Posted by ted920

Hamman one looks great!

Cost?

I think it was about €1200 and paid another 250 for the painting and mounting

BimmerVinyl · 04-26-2020, 03:06 PM

I was considering purchasing the same one from AliExpress, looks great. How was shipping amidst everything that is going on right now? We're they able to get it to you timely? I am in New York. Thanks!

samvora · 04-26-2020, 11:20 PM

Quote:

Originally Posted by JackB316

I was considering purchasing the same one from AliExpress, looks great. How was shipping amidst everything that is going on right now? We're they able to get it to you timely? I am in New York. Thanks!

I ordered it in February and it got delivered in 2 weeks but at that time covid related travel and shipping and such wasn't too delayed. Now the shipping is more than a month. I would just wait it out to be honest

BimmerVinyl · 04-27-2020, 07:35 AM

Quote:

Originally Posted by samvora

Quote:

Originally Posted by JackB316

I was considering purchasing the same one from AliExpress, looks great. How was shipping amidst everything that is going on right now? We're they able to get it to you timely? I am in New York. Thanks!

I ordered it in February and it got delivered in 2 weeks but at that time covid related travel and shipping and such wasn't too delayed. Now the shipping is more than a month. I would just wait it out to be honest

Good call, thanks for the response!

tvasica · 04-27-2020, 08:12 AM

Look here:

x5m50i · 05-30-2020, 02:50 AM

Quote:

Originally Posted by tvasica

Look here:

i have the same one

tvasica · 05-30-2020, 03:10 AM

Quote:

Originally Posted by x5m50i

Quote:

Originally Posted by tvasica

Look here:

i have the same one

Have you got photos? Iam thinking betbeen AC and Larte design now

tvasica · 05-30-2020, 03:20 AM

Quote:

Originally Posted by tvasica

Quote:

Originally Posted by x5m50i

Quote:

Originally Posted by tvasica

Look here:

i have the same one

Have you got photos? Iam thinking betbeen AC and Larte design now

Larte design front lip and rear diffusor

x5m50i · 05-31-2020, 04:24 PM

Quote:

Originally Posted by tvasica

Quote:

Originally Posted by x5m50i

Quote:

Originally Posted by tvasica

Look here:

i have the same one

Have you got photos? Iam thinking betbeen AC and Larte design now

https://www.bimmerpost.com/forums/sh...php?p=25838085

ted920 · 06-01-2020, 08:46 PM

Large design looks great but what's the price?

tvasica · 06-07-2020, 10:52 AM

Quote:

Originally Posted by ted920

Large design looks great but what's the price?

AC cost about 1600 eur

Alinho · 09-23-2020, 06:20 AM

Quote:

Originally Posted by tvasica

Quote:

Originally Posted by tvasica

Quote:

Originally Posted by x5m50i

Quote:

Originally Posted by tvasica

Look here:

i have the same one

Have you got photos? Iam thinking betbeen AC and Larte design now

Larte design front lip and rear diffusor

Quote:

Originally Posted by tvasica

Quote:

Originally Posted by tvasica

Quote:

Originally Posted by x5m50i

Quote:

Originally Posted by tvasica

Look here:

i have the same one

Have you got photos? Iam thinking betbeen AC and Larte design now

Larte design front lip and rear diffusor

Love it man, i have the same color and thats my next project.

Where did you buy the front lip from ?

tvasica · 09-23-2020, 07:44 AM

My Larte design

Alinho · 10-02-2020, 04:10 PM

Quote:

Originally Posted by tvasica

My Larte design

Love it man, this my next project, where did you get the front lip from?
I have the same color and im getting my grille black and the lip😍

Alinho · 10-02-2020, 04:12 PM

Quote:

Originally Posted by tvasica

My Larte design

Did you black out the roof ?

tvasica · 10-03-2020, 01:51 AM

Quote:

Originally Posted by Alinho

Quote:

Originally Posted by tvasica

My Larte design

Did you black out the roof ?

Yes, black glossy wrap

tvasica · 10-03-2020, 01:53 AM

Quote:

Originally Posted by Alinho

Quote:

Originally Posted by tvasica

My Larte design

Love it man, this my next project, where did you get the front lip from?
I have the same color and im getting my grille black and the lip😍

Larte-design.com

All my car is in satin matte white pearl wrap and all equipments are on black glossy. M mirrors etc.

tvasica · 10-04-2020, 10:30 PM

Larte design front flip detail

VetteZ06 · 01-24-2021, 03:41 PM

Quote:

Originally Posted by samvora

Quote:

Originally Posted by chriscross

Quote:

Originally Posted by samvora

Here are some cell phone pictures of the lip installed by myself, today. Excuse the dirty car but she's not been out since about 4 weeks now.

Did you use existing screw holes or was there additional surgery needed

?

Looks very nice, this lip design seems to be the go to choice for most X5s. Where did you get it? How much? EDIT: found it on the previous page

I also see you put the M mirror caps on...carbon fiber? Where from?

Would love to see some more photos too! Sorry for all the extra questions

The lip comes with 4 points to screw in the self tapping screws at but they are exactly where the rubber grommets are so you can't really drill the screw in unless you drill a hole into the grommets and all of that so I basically just drilled a hole next to the points and screwed the lip in. Also added 1 long screw in the middle of the lip and all holds perfectly tight. Yes, I love the look and how well it sits and moulds to the bumper.

Nice. I also ordered one from China but in glossy black. Did you have to use double side tape and did you get install instructions?

bimmerwerks · 02-06-2021, 08:39 PM

Quote:

Originally Posted by VetteZ06

Quote:

Originally Posted by samvora

Quote:

Originally Posted by chriscross

Quote:

Originally Posted by samvora

Here are some cell phone pictures of the lip installed by myself, today. Excuse the dirty car but she's not been out since about 4 weeks now.

Did you use existing screw holes or was there additional surgery needed

?

Looks very nice, this lip design seems to be the go to choice for most X5s. Where did you get it? How much? EDIT: found it on the previous page

I also see you put the M mirror caps on...carbon fiber? Where from?

Would love to see some more photos too! Sorry for all the extra questions

The lip comes with 4 points to screw in the self tapping screws at but they are exactly where the rubber grommets are so you can't really drill the screw in unless you drill a hole into the grommets and all of that so I basically just drilled a hole next to the points and screwed the lip in. Also added 1 long screw in the middle of the lip and all holds perfectly tight. Yes, I love the look and how well it sits and moulds to the bumper.

Nice. I also ordered one from China but in glossy black. Did you have to use double side tape and did you get install instructions?

Hey did it arrive? How's quality and fitment?

samvora · 02-08-2021, 01:59 AM

Quote:

Originally Posted by VetteZ06

Quote:

Originally Posted by samvora

Quote:

Originally Posted by chriscross

Quote:

Originally Posted by samvora

Here are some cell phone pictures of the lip installed by myself, today. Excuse the dirty car but she's not been out since about 4 weeks now.

Did you use existing screw holes or was there additional surgery needed

?

Looks very nice, this lip design seems to be the go to choice for most X5s. Where did you get it? How much? EDIT: found it on the previous page

I also see you put the M mirror caps on...carbon fiber? Where from?

Would love to see some more photos too! Sorry for all the extra questions

The lip comes with 4 points to screw in the self tapping screws at but they are exactly where the rubber grommets are so you can't really drill the screw in unless you drill a hole into the grommets and all of that so I basically just drilled a hole next to the points and screwed the lip in. Also added 1 long screw in the middle of the lip and all holds perfectly tight. Yes, I love the look and how well it sits and moulds to the bumper.

Nice. I also ordered one from China but in glossy black. Did you have to use double side tape and did you get install instructions?

No install instructions and the bottom part needs to be fixed to the top part of the lip with double sided tape and then the whole thing gets screwed on. However, after almost 6 months+ of use I realize that the tape between the bottom part of the lip and the top part of the lip has started to wear down on its stickiness so that bottom part is hanging a bit on one side. I am going to put in three screws to fix the bottom part of the lip to the top part. I had tried this when I installed the lip but the drill bit that I had was not long enough so I didn't bother with it but I guess now it is time to do that.

eazeNY · 01-12-2022, 02:43 PM

Has anyone heard of Schmiedmann? Thinking about getting their kit, but wanted some feedback from you guys first. Not bad for around $850.
https://www.schmiedmann.com/en/bmw-x...uct=SPKITX5G05

04-26-2020, 03:06 PM	#46
BimmerVinyl Banned 401 Rep 338 Posts Drives: 2022 M240i Join Date: Mar 2015 Location: USA iTrader: (0)	I was considering purchasing the same one from AliExpress, looks great. How was shipping amidst everything that is going on right now? We're they able to get it to you timely? I am in New York. Thanks!
	Appreciate 0 Quote

04-27-2020, 08:12 AM	#49
tvasica Private First Class 71 Rep 158 Posts Drives: BMW G05 M50D Join Date: Feb 2020 Location: Czech Republic iTrader: (0)	Look here:
	Appreciate 0 Quote

06-01-2020, 08:46 PM	#54
ted920 Lieutenant 163 Rep 413 Posts Drives: 2019 BMW X5 40i, Lexus GS 300 Join Date: Oct 2019 Location: CT iTrader: (0)	Large design looks great but what's the price?
	Appreciate 1 tvasica70.50 Quote

09-23-2020, 07:44 AM	#57
tvasica Private First Class 71 Rep 158 Posts Drives: BMW G05 M50D Join Date: Feb 2020 Location: Czech Republic iTrader: (0)	My Larte design Attached Images
	Appreciate 0 Quote

10-04-2020, 10:30 PM	#62
tvasica Private First Class 71 Rep 158 Posts Drives: BMW G05 M50D Join Date: Feb 2020 Location: Czech Republic iTrader: (0)	Larte design front flip detail Attached Images
	Appreciate 0 Quote

01-12-2022, 02:43 PM	#66
eazeNY Enlisted Member 25 Rep 47 Posts Drives: '09 M3/'16 X5/'18 430i/'22 X5 Join Date: Oct 2008 Location: Westchester, NY iTrader: (1) Garage List '09 M3 [0.00] 09 e92 [0.00] 02 Envoy [0.00]	Has anyone heard of Schmiedmann? Thinking about getting their kit, but wanted some feedback from you guys first. Not bad for around $850. https://www.schmiedmann.com/en/bmw-x...uct=SPKITX5G05 __________________ '09 E90 M3/'18 F33 430i/ '22 G05 X5
	Appreciate 1 g05mike12.00 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search