Coding for engine display menu (Power & Rev)

phayze · 04-06-2021, 11:48 PM

Anyone know how to code for this menu for change between “Power meter” and “Rev Counter”?

Silver.Solid · 04-09-2021, 06:28 AM

That would be a great trick as the power meter leaves much to be desired honestly.

phillydilles · 04-09-2021, 09:45 AM

Quote:

Originally Posted by phayze

Anyone know how to code for this menu for change between "Power meter" and "Rev Counter"?

Is this image from a G20 or a G05? I recall having seen it in G20 loaners I've gotten in the past, though.

phayze · 04-09-2021, 06:56 PM

I saw this on a G20.

Quote:

Originally Posted by phillydilles

Is this image from a G20 or a G05? I recall having seen it in G20 loaners I've gotten in the past, though.

Dwillbimmer · 04-09-2021, 08:54 PM

My G06 has this menu item for switching the right display, so I’d imagine that the G05 has it.

mdallas · 05-06-2021, 10:53 AM

my G05 has this menu item. built end of April 21

phayze · 05-09-2021, 09:47 AM

Any idea how to code to add this menu?

ladra · 05-12-2021, 10:26 PM

I have MY2021, built in January. It already has this menu from factory. You probably just need a software update.

mitch57 · 05-13-2021, 07:03 PM

Quote:

Originally Posted by ladra

I have MY2021, built in January. It already has this menu from factory. You probably just need a software update.

What iStep version is your vehicle on currently? What version was it on when you took delivery?

Freelancer withour work · 05-16-2021, 01:41 AM

Maybe coding at dkombi.
this has not in new software.
For new build car only.
My g20 is 21-03-550 but not have this.
if who share dkombi cafd ncd to me, I'll find that.

phayze · 05-16-2021, 03:50 AM

Hi,

Mine using 21-03-536, also dun have this option.

Quote:

Originally Posted by akakingj

Maybe coding at dkombi.
this has not in new software.
For new build car only.
My g20 is 21-03-550 but not have this.
if who share dkombi cafd ncd to me, I'll find that.

Freelancer withour work · 05-16-2021, 06:50 AM

Quote:

Originally Posted by phayze

Hi,

Mine using 21-03-536, also dun have this option.

Quote:

Originally Posted by akakingj

Maybe coding at dkombi.
this has not in new software.
For new build car only.
My g20 is 21-03-550 but not have this.
if who share dkombi cafd ncd to me, I'll find that.

Then it could be a country difference.

phayze · 05-16-2021, 07:18 AM

Hi,

My country new G20 have this menu. My iStep is upgrade from 2019.

Quote:

Originally Posted by akakingj

Then it could be a country difference.

Freelancer withour work · 05-17-2021, 02:15 AM

Quote:

Originally Posted by phayze

Hi,

My country new G20 have this menu. My iStep is upgrade from 2019.

My G20's first build is 2020-07, it made on 2020-06.
From 2020-11 to 2021-03, since I updated the firmware myself,
I touched all the minor versions, but I can't find the rpm, rev menu.
and It doesn't even exist in the 2021 G20 and G22 in my country.
I think there are differences in coding values for each country.
damn!!

Fpgiuliano · 05-17-2021, 02:10 PM

I think u need to change this parameter on Dkombi’s ecu

POWERMETER_CCM_VARIANTE: triggerung_kombi [01]

I found it on g21 my2021 comparing it with g21 my19

Freelancer withour work · 05-17-2021, 03:24 PM

Quote:

Originally Posted by Fpgiuliano

I think u need to change this parameter on Dkombi’s ecu

POWERMETER_CCM_VARIANTE: triggerung_kombi [01]

I found it on g21 my2021 comparing it with g21 my19

Oh Thanks!!

I'll try and upload review!

Freelancer withour work · 05-18-2021, 04:04 AM

Quote:

Originally Posted by Fpgiuliano

I think u need to change this parameter on Dkombi’s ecu

POWERMETER_CCM_VARIANTE: triggerung_kombi [01]

I found it on g21 my2021 comparing it with g21 my19

This code is default set my car...
I'll try find another code.

mikasgm · 02-19-2022, 05:11 AM

Hello,
Did you finally find a solution for that coding?

B530e · 02-23-2022, 01:16 AM

I been trying to figure out how to code this for a while. I have a 2022 540i with this option and a 2020 530e with only the power meter. This option comes on vehicles with the 48 volt system (540i, M340i, M440i, X5 40i, etc)

04-06-2021, 11:48 PM	#1
phayze Second Lieutenant 29 Rep 207 Posts Drives: BMW Join Date: Nov 2019 Location: Singapore iTrader: (0)	Coding for engine display menu (Power & Rev) Anyone know how to code for this menu for change between “Power meter” and “Rev Counter”? Attached Images
	Appreciate 0 Tweet Quote

04-09-2021, 06:28 AM	#2
Silver.Solid Second Lieutenant 116 Rep 254 Posts Drives: '19 X5 Join Date: Dec 2019 Location: Riyadh iTrader: (0)	That would be a great trick as the power meter leaves much to be desired honestly.
	Appreciate 0 Quote

04-09-2021, 08:54 PM	#5
Dwillbimmer Second Lieutenant 108 Rep 242 Posts Drives: 2021 X6 sDrive 40i Join Date: Jan 2021 Location: South FL iTrader: (0)	My G06 has this menu item for switching the right display, so I’d imagine that the G05 has it.
	Appreciate 0 Quote

05-06-2021, 10:53 AM	#6
mdallas Private 31 Rep 89 Posts Drives: 2021 G05 40i Join Date: Aug 2012 Location: New England iTrader: (0)	my G05 has this menu item. built end of April 21 __________________ "When Zack gets behind the wheel he looks like an angry Mr. Magoo on meth" - Mike Tornabene
	Appreciate 0 Quote

05-09-2021, 09:47 AM	#7
phayze Second Lieutenant 29 Rep 207 Posts Drives: BMW Join Date: Nov 2019 Location: Singapore iTrader: (0)	Any idea how to code to add this menu?
	Appreciate 0 Quote

05-12-2021, 10:26 PM	#8
ladra Private 18 Rep 76 Posts Drives: X5 (G05) 2021 Join Date: Mar 2021 Location: USA iTrader: (0)	I have MY2021, built in January. It already has this menu from factory. You probably just need a software update.
	Appreciate 0 Quote

05-16-2021, 01:41 AM	#10
Freelancer withour work Enlisted Member 9 Rep 42 Posts Drives: BMW G20 320i M Sport Join Date: Dec 2020 Location: South Korea iTrader: (0)	Maybe coding at dkombi. this has not in new software. For new build car only. My g20 is 21-03-550 but not have this. if who share dkombi cafd ncd to me, I'll find that. __________________ 2014 ~ 2017 Chevrolet Cruze J300 1.8 2017 ~ 2019 Mercedes Benz W205 C200 2019 ~ 2020 KIA Motors YG K7 Premier 3.0 2020 ~ BMW G20 320i
	Appreciate 0 Quote

05-17-2021, 02:10 PM	#15
Fpgiuliano Second Lieutenant 43 Rep 242 Posts Drives: Bmw 320d Touring xDrive Msport Join Date: Sep 2015 Location: Italy iTrader: (0)	I think u need to change this parameter on Dkombi’s ecu POWERMETER_CCM_VARIANTE: triggerung_kombi [01] I found it on g21 my2021 comparing it with g21 my19
	Appreciate 0 Quote

02-19-2022, 05:11 AM	#18
mikasgm Registered 0 Rep 4 Posts Drives: BMW F40 118i Join Date: Jan 2021 Location: Greece iTrader: (0)	Hello, Did you finally find a solution for that coding?
	Appreciate 0 Quote

02-23-2022, 01:16 AM	#19
B530e Second Lieutenant 284 Rep 202 Posts Drives: 2023 BMW 760xi, 2024 BMW 530i Join Date: Oct 2018 Location: Montecito, California iTrader: (0) Garage List 2021 BMW 540i [0.00] 2020 BMW 530e [0.00]	I been trying to figure out how to code this for a while. I have a 2022 540i with this option and a 2020 530e with only the power meter. This option comes on vehicles with the 48 volt system (540i, M340i, M440i, X5 40i, etc) __________________
	Appreciate 0 Quote