[lpawelek]

Originally Posted by mlurker

Can you share the file please

PM me your email address pls

[aleksy]

lpawelek

Siemasz,
Mam x5 50 2019
Mam pare pytan odnodnie
Bu- aSLA, TLA, itp
Nie do konca potrafie to uzywac
z cheat sheet
Jak bys mial chwilke, I chicialoby ci sie
To napisz mi w Pm twoj number Whatsappa
Ja nie moge jeszcze pisac Pm
Nie Mam wystarczajaca postow…
Dzieki!!

Sorry y’all I have few questions about bu
I feel like my fellow polak might be down to answer me few questions

[aMIC]

Is possible to set a parameter that would stop the car ahead of location of the stop light?
That would help/ solve the issue that in US the traffic lights are after the intersection vs just before the intersection in Europe or other places.

[thepianist1]

Can BimmerUtility modify any parameters in ICM, SAS or DSC modules? For me it’s view only and I paid for the $109 access full.

[lpawelek]

I don't know if any parameters BU is able to change, but as far as I used this utlility every module was successfully coded.

[007bandido]

Hello,
Just updated OTA from 03.2023 to 11.2023. Impossible to put back TLA when it worked perfect before update. The option is available in the idrive put I can't select. I use BU and cheat codes does'nt work anymore for TLA. Thanks.

[lactlac]

Could you please send me the link or file? lactlac@gmail.com
Thanks in advance.
Bambazonke

[Bambazonke]

Originally Posted by lactlac

Could you please send me the link or file? lactlac@gmail.com
Thanks in advance.
Bambazonke

File sent

[Bambazonke]

Originally Posted by 007bandido

Hello,
Just updated OTA from 03.2023 to 11.2023. Impossible to put back TLA when it worked perfect before update. The option is available in the idrive put I can't select. I use BU and cheat codes does'nt work anymore for TLA. Thanks.

The cheat codes supplied by BU for TLA aSLA are not complete. They are missing the coding for one of the ECU's that is required for it to work.

Secondly when using the cheat codes to change, do one or two lines at the most Especially "Land masks" to "FF FF FF FF" execute one command at a time and save and check to confirm the file has been changed to the new value. I have found when trying to execute multiple lines in one step they are not always saved to the "new" values

[Bambazonke]

Originally Posted by thepianist1

Can BimmerUtility modify any parameters in ICM, SAS or DSC modules? For me it’s view only and I paid for the $109 access full.

Yes BU can do all but you must put the vehicle in diagnostic mode (press start button quickly three times without foot on the brake) A message will come up on the instrument panel telling you your vehicle is now in diagnostic mode and will give you access to all ECU's

[Emengy]

Originally Posted by Bambazonke

File sent

May I ask you to email me too? emengy.ae@gmail.com
Going to try this in UAE.
Many thanks in advance

[lactlac]

Originally Posted by Bambazonke

File sent

Thank you very much! My list had all the codes except IntRxSWINVarianten

[lactlac]

Bambazonke
There is a question about DEFAULT_EINSTELLUNG_STL_BEI_TFL. Are you sure this option applies to TLA? Esys contains such a comment:
(ger) MenüDefaulteinstellung für Standlicht bei Tagfahrlicht
(eng) Menu Default setting for parking light for daytime running lights

[Bambazonke]

Originally Posted by lactlac

Bambazonke
There is a question about DEFAULT_EINSTELLUNG_STL_BEI_TFL. Are you sure this option applies to TLA? Esys contains such a comment:
(ger) MenüDefaulteinstellung für Standlicht bei Tagfahrlicht
(eng) Menu Default setting for parking light for daytime running lights

Probably not, what I do is run a SVT coding verification exercise on my X5 by changing the production year in the FA list ie 7/19 to 7/20 and or market version eg 801 (Germany) vs 812 (UK) and list the changes. Pending your iLevel status and hardware fitted these "new" features may or may not work hence my indemnity clause at the top of the sheet

[Yoram57]

Originally Posted by lactlac

Thank you very much! My list had all the codes except IntRxSWINVarianten

Hello!

What does the IntRxSWINVarianten parameters change/ impact?
And to what value should these be set for a Feb 2020 G20 (software 03-2023)?

I have coded aSLA, TLA and UCC to my 2020 G20 today. Most of the features are working. Although braking for traffic lights is very late (maybe because TLA is officially not supported in the Netherlands). And the green light alert is not working. So I am going over the coding again to check whether I missed something.

Bambazonke Would be great to receive your cheat sheet. I have sent you a PM.

[Bambazonke]

Originally Posted by Yoram57;3Int0972506

Hello!

What does the RxSWINVarianten parameters change/ impact?
And to what value should these be set for a Feb 2020 G20 (software 03-2023)?

I have coded aSLA, TLA and UCC to my 2020 G20 today. Most of the features are working. Although braking for traffic lights is very late (maybe because TLA is officially not supported in the Netherlands). And the green light alert is not working. So I am going over the coding again to check whether I missed something.

Bambazonke Would be great to receive your cheat sheet. I have sent you a PM.

Cheat sheet sent G20 Values for RxSWINVarianten will be in the drop down menu in BU which you will have to manually overide

[Emengy]

Originally Posted by Bambazonke

Cheat sheet sent G20 Values for RxSWINVarianten will be in the drop down menu in BU which you will have to manually overide

RxSWINVarianten looks like something related to physical windows. Are you sure this is required for TLA?

[jonesy16]

I've tried doing a quick search but couldn't find anything definitive ... which of these two options works on US cars? (I have DAP, '21 45e)

[Bambazonke]

Originally Posted by Emengy

RxSWINVarianten looks like something related to physical windows. Are you sure this is required for TLA?

They may do, however in my X5 assembled in Aug 2019 i had a generic setting value which after coding verification and changing the build date to 07/20 (when TLA was first introduced to the GO5 in certain markets) the value changed to a model specific value. Normally code settings for window functions are to be found in the BDC modules not in the SAS3 & DSC_VIP ECU's. These values may be already set to model specific values in vehicles assembled after July 2020 if they are indeed related to non TLA features.

[vcastceo]

Hi, I am new Bimmer Utility user and I tried activate urban cruise control with some codes, BDC_BODY3, HU_MGU, SAS3, DSC_VIP_IB4 module. But I couldn't find any relevant codes in KAFAS4.
However, after coding, my steering wheel does not detect my hand. always blink after 5 second, and steering wheel icon change to grey color.
I would like to share which codes I change all, but afraid that it should be violate forum's rule.... Any idea?

[Egorka1983]

Originally Posted by Bambazonke

Pm me your email address as I have a cheat sheet specifically for G05 that includes coding for the fourth ECU & more

You can send a shporgalka on TLA, TRL to BMW x5 g05 by mail egornazarov1983@gmail.com

[Egorka1983]

Originally Posted by postbox1918

I've used your cheat sheet and coded my G05 and UCC , Highway exit both works perfectly fine just the TLA is little hit and miss i think it has to do with red lights in USA are not exactly marked on idrive maps properly sometimes i can feel that car hesitate or gets confused where to exactly stop at red light ,but thanks a lot for your cheat sheet and helping me out with the coding.

Good afternoon, please tell me If you can send a shporgalka to TLA, TRL to send to BMW x5 g05 to send by mail egornazarov1983@gmail.com