[bichoo]

Originally Posted by Almaretto

G05 has FLM2, rather than LHM/TMS like F25.

G05 will have 5AP, but not 8S4.

Yes, I can change that and so could anyone as is it in Launcher-mapped ECU. The other ECU's/CAFD may cause issue for some.

I just realized that I'm not seeing all the ECU's, I think the car needs to be actually turned on to read all of them? Can you still point me to the ECU where these values are located.

[AndroidRobot]

Originally Posted by Almaretto

G05 has FLM2, rather than LHM/TMS like F25.

G05 will have 5AP, but not 8S4.

Yes, I can change that and so could anyone as is it in Launcher-mapped ECU. The other ECU's/CAFD may cause issue for some.

can you see if 'Active Road Preview' is an option in the safety systems or handling/body ECU. The X7 has this with the DHP so I figured since all hardware is the same it might work on the X5

[Almaretto]

Originally Posted by bichoo

I just connected to e-sys and you are right, I can see all the ECU's but everything is trimmed except for a couple of ECU's. I searched the ECU's for LUT_FLC_FORWARDLIGHTING_Y and C_AFS_ENA and nothing comes up.
Do you have the untrimmed files? I didn't think they were available yet? Or am I am looking in the wrong spot?

I'm using e-sys 3.27.1 and Launcher 2.80

It requires Launcher Pro or E-sysX.

Premium is Trimmed for G-series.

Originally Posted by AndroidRobot

can you see if 'Active Road Preview' is an option in the safety systems or handling/body ECU. The X7 has this with the DHP so I figured since all hardware is the same it might work on the X5

I would need more details to know for what to look.

[AndroidRobot]

Originally Posted by Almaretto

It requires Launcher Pro or E-sysX.

Premium is Trimmed for G-series.

I would need more details to know for what to look.

I'm not sure what ECU it's under bur I had the same wrong.


it's called: 2VS Active Comfort Drive with Road Preview and has been an option featured on 7 Series since at least 2016. I'll try and see if I can find what ECU the feature resides under

[Almaretto]

Originally Posted by AndroidRobot

I'm not sure what ECU it's under bur I had the same wrong.


it's called: 2VS Active Comfort Drive with Road Preview and has been an option featured on 7 Series since at least 2016. I'll try and see if I can find what ECU the feature resides under

PHP Code:

 <fa2fpMapping>
        <faElement code="2VS" selector="W">
        </faElement>
        <fpElement categoryVal="9" criteriaVal="2612">
          <criteriaName>2VS_MASTERPIECE_ARBEITSNAME</criteriaName>
          <criteriaNameEN>2VS_MASTERPIECE_ARBEITSNAME</criteriaNameEN>
          <categoryName>Sonderausstattung_PKW</categoryName>
          <categoryNameEN>Option_Car</categoryNameEN>
        </fpElement>
      </fa2fpMapping> 


[AndroidRobot]

Originally Posted by Almaretto

PHP Code:

 <fa2fpMapping>
        <faElement code="2VS" selector="W">
        </faElement>
        <fpElement categoryVal="9" criteriaVal="2612">
          &#60;criteriaName>2VS_MASTERPIECE_ARBEITSNAME</criteriaName>
          &#60;criteriaNameEN>2VS_MASTERPIECE_ARBEITSNAME</criteriaNameEN>
          &#60;categoryName>Sonderausstattung_PKW</categoryName>
          &#60;categoryNameEN>Option_Car</categoryNameEN>
        &#60;/fpElement>
      &#60;/fa2fpMapping> 


Can it be enabled? I need to download the software again on to my wife's MSI laptop since I can't put it on my work one.

[bichoo]

Originally Posted by Almaretto

It requires Launcher Pro or E-sysX.

Thanks, I was starting to think that was the problem. E-sysx isn't cheap and waiting for TM might be a while from what I have heard

Question: are all the cafd's available and all untrimmed through whatever u are using, one of the 2 options?

[Almaretto]

Originally Posted by bichoo

Thanks, I was starting to think that was the problem. E-sysx isn't cheap and waiting for TM might be a while from what I have heard

Question: are all the cafd's available and all untrimmed through whatever u are using, one of the 2 options?

No. Not all are available for all. I do have access to them.

[roadkillrob]

Originally Posted by bichoo

Thanks, I was starting to think that was the problem. E-sysx isn't cheap and waiting for TM might be a while from what I have heard

Question: are all the cafd's available and all untrimmed through whatever u are using, one of the 2 options?

Been waiting on TM for 8 weeks, giving up and going to get esysx it’s a bit more money but way less primadonna.

[AndroidRobot]

Originally Posted by roadkillrob

Been waiting on TM for 8 weeks, giving up and going to get esysx it’s a bit more money but way less primadonna.

Originally Posted by roadkillrob

Been waiting on TM for 8 weeks, giving up and going to get esysx it’s a bit more money but way less primadonna.

Does it have access to all of the ECUs?

[bichoo]

Originally Posted by AndroidRobot

Does it have access to all of the ECUs?

No, the latest launcher pro can see some ECU's. Take a look at the spreadsheet under G05, the ones with * are not readable: https://cartechnology.co.uk/attachment.php?aid=78110

Shout out to Almaretto for posting this on another forum

Getting the latest launcher pro seems next to impossible with no communication from TM so I guess to try this out, gotta spend 100EUR for esysx, which I assume would see the same. I just can't justify spending that much right now to try it out. I may just wait it out..haven't decided yet what to do.

[Jrunr]

Let’s see if we can get you some donations to cover some of the cost of you are doing the research for us here in the G05 section. I’m willing to contribute if other members will as well! 👍

[AndroidRobot]

I'll gladly buy whatever program or donate to help support development. Laser lights are worth the expense

[hcastudillo]

I'd be willing to donate as well Looking forward to being able to code various things on our vehicles!

[bichoo]

Thanks for the offer and I will take it into consideration.
I've reached out to the EsysX developers to confirm if the application can access ECU's, similar to Launcher Pro. I'll keep you posted.

Almaretto's solution is for VLD (including cornering lights) and not GFHB, which is anti-dazzle. Perhaps the solution to enable GFHB is similar to the other G series but maybe not. On other vehicles, the lighting ECU's needed to be modified as well to make it function correctly and these FLM ECU's are not readable. So the focus for now should be to get VLD and cornering lights enabled, for which we have been provided a solution for above.

And even if this worked and some of you folks of donated, I don't think I would be able to code your vehicles as I believe the esysx license is for a single PC and if remote coding is possible, I have no clue how. I wouldn't want to waste your donations...I'm just an amateur coder that's still learning...Almaretto's the expert.

[AndroidRobot]

Originally Posted by bichoo

Thanks for the offer and I will take it into consideration.
I've reached out to the EsysX developers to confirm if the application can access ECU's, similar to Launcher Pro. I'll keep you posted.

Almaretto's solution is for VLD (including cornering lights) and not GFHB, which is anti-dazzle. Perhaps the solution to enable GFHB is similar to the other G series but maybe not. On other vehicles, the lighting ECU's needed to be modified as well to make it function correctly and these FLM ECU's are not readable. So the focus for now should be to get VLD and cornering lights enabled, for which we have been provided a solution for above.

And even if this worked and some of you folks of donated, I don't think I would be able to code your vehicles as I believe the esysx license is for a single PC and if remote coding is possible, I have no clue how. I wouldn't want to waste your donations...I'm just an amateur coder that's still learning...Almaretto's the expert.

I think he has access to those ECUs but the coding is different than before. Again I don't want to speak on his behalf but send him a DM because I'm not sure if I can post what he told me.

[Almaretto]

Originally Posted by AndroidRobot

Can it be enabled? I need to download the software again on to my wife's MSI laptop since I can't put it on my work one.

I have not had a chance to do analysis to figure out what that changes or test. So, at this point, I cannot give definitive answer.

[TurtleBoy]

I have question about the coding, does it survive updates or do you need to make the changes again after each time you update iDrive?

[AndroidRobot]

Originally Posted by Almaretto

I have not had a chance to do analysis to figure out what that changes or test. So, at this point, I cannot give definitive answer.

do you need a guinea pig?

[russelldav]

Originally Posted by TurtleBoy

I have question about the coding, does it survive updates or do you need to make the changes again after each time you update iDrive?

It depends if the software update touches the ECU you have coded. If it does, you need to recode. There are so many ECUs...

[skalberti]

Originally Posted by bichoo

I just connected to e-sys and you are right, I can see all the ECU's but everything is trimmed except for a couple of ECU's. I searched the ECU's for LUT_FLC_FORWARDLIGHTING_Y and C_AFS_ENA and nothing comes up.
Do you have the untrimmed files? I didn't think they were available yet? Or am I am looking in the wrong spot?

I'm using e-sys 3.27.1 and Launcher 2.80

There's newer versions of E-SYS and Launcher Pro running. You may want to purchase those.

[skalberti]

Originally Posted by bichoo

Thanks for the offer and I will take it into consideration.
I've reached out to the EsysX developers to confirm if the application can access ECU's, similar to Launcher Pro. I'll keep you posted.

Almaretto's solution is for VLD (including cornering lights) and not GFHB, which is anti-dazzle. Perhaps the solution to enable GFHB is similar to the other G series but maybe not. On other vehicles, the lighting ECU's needed to be modified as well to make it function correctly and these FLM ECU's are not readable. So the focus for now should be to get VLD and cornering lights enabled, for which we have been provided a solution for above.

And even if this worked and some of you folks of donated, I don't think I would be able to code your vehicles as I believe the esysx license is for a single PC and if remote coding is possible, I have no clue how. I wouldn't want to waste your donations...I'm just an amateur coder that's still learning...Almaretto's the expert.

You'd have to create a VM to code others cars with teamviewer.