[PNWM50I]

Originally Posted by lexttu

Which tips are these? This exhaust search is much more difficult than I expected!

Those aren’t tips, that is the dahler exhaust system.

[Chuck W.]

Originally Posted by lexttu

Which tips are these? This exhaust search is much more difficult than I expected!

I believe that those are Cargraphic. They have a web page and have three variants listed on eBay; mirrored tips, gloss black tips and carbon fiber tips.

https://www.cargraphic.de/fileadmin/...enziner_EN.pdf

https://www.ebay.com/itm/373489761601

[yoandry]

Well, I'm not spending 4k+ on catback exhaust, so i just went I did mine cutting and welding.
Is not that bad for those who want to revert back to stock. Me I don't care as its not a lease so im keeping it for long.
What I did was. Cutting the inner pipe ones right at the catback and cutting 1" of pipe then weld it back. So it will will separate from the outer one and fit dual 4". Then just weld the tips or clap it, whatever.
The current tips on the pictures are 2.5"In x 4"OT x 7" long. Now I like the tips but but... from the back you can't really notice anything there as the are the sharp edge dual wall. So I ordered round edge one to see how it looks.
I still gonna remove the current one so If i keep those, I can fix some alignment issues between them i dont like it.

[Chk_ris]

Originally Posted by lexttu

Which tips are these? This exhaust search is much more difficult than I expected!

This is the Dahler exhaust “catback” system and tips.

[Anders R]

Originally Posted by yoandry

Well, I'm not spending 4k+ on catback exhaust, so i just went I did mine cutting and welding.
Is not that bad for those who want to revert back to stock. Me I don't care as its not a lease so im keeping it for long.
What I did was. Cutting the inner pipe ones right at the catback and cutting 1" of pipe then weld it back. So it will will separate from the outer one and fit dual 4". Then just weld the tips or clap it, whatever.
The current tips on the pictures are 2.5"In x 4"OT x 7" long. Now I like the tips but but... from the back you can't really notice anything there as the are the sharp edge dual wall. So I ordered round edge one to see how it looks.
I still gonna remove the current one so If i keep those, I can fix some alignment issues between them i dont like it.

That looks superb!

[yoandry]

I updated the tips for these round edge one, looks better now.

[Anders R]

And debadged now

[yoandry]

Originally Posted by Anders R

And debadged now

Yes, lol. I bought the black one so I will only put M50i.

[BocaIvan]

Originally Posted by yoandry

I updated the tips for these round edge one, looks better now.

Looks great!

[Project Shadow]

I bought the silver tips, and the Roasted Blue as well… I’m running Carbon Black, which shows a deep Sapphire Blue in clean light… Hoping the Roasted Blue tips, will change colors as my paint color does.. Black in the shade, but blue in the sun light… as cheap as these are, can’t wait to see the difference… All bow down to the OP for this opportunity/find… 🥳😎

[Project Shadow]

https://www.amazon.com/gp/product/B0...0?ie=UTF8&th=1

[CT335xi]

Originally Posted by Project Shadow

I bought the silver tips, and the Roasted Blue as well… I’m running Carbon Black, which shows a deep Sapphire Blue in clean light… Hoping the Roasted Blue tips, will change colors as my paint color does.. Black in the shade, but blue in the sun light… as cheap as these are, can’t wait to see the difference… All bow down to the OP for this opportunity/find… 🥳😎

Post some photos when installed

[songoku]

Carbon Fiber M Performance Exhaust Tips

[Project Shadow]

Rustic blue tips…

[Project Shadow]

Hopefully better pic, if you’re not dead on center of your vehicle when taking the pic, one side will seem lower than the other, but trust me, they’re level… will take a better pic tomorrow… kinda diggin it for now, they change color as my paint does, depending on the lighting… paint goes dark, tips go dark…

[PNWM50I]

Originally Posted by Project Shadow

Hopefully better pic

I also previously had tips slipped on but they still just don’t look right. Maybe it’s just me. I think the cutting/welding option is the way to go and it looks much more aggressive and substantial than the stock exhaust tail pipes.

[Project Shadow]

Originally Posted by PNWM50I

I also previously had tips slipped on but they still just don’t look right. Maybe it’s just me. I think the cutting/welding option is the way to go and it looks much more aggressive and substantial than the stock exhaust tail pipes.

I agree, when I start attacking the body work etc, will definitely go for more aggressive and larger tips… bought the rustic blues (since no one doing slip ons) has tried, and bought the silver ones as well just in case… but wife has me on lock down spending since we just bought our X5 and X4… women just don’t understand…

[cubanbimmer3]

Well, I bought the $25 Amazon tips.. initially just bought one set because I’m a genius. Then I ordered another set, and installed all four. 24 hours later and I’ve already lost one off the car 😂. So I just ordered an entire other set.

Am I doing something wrong?? I just threw them on in 20 seconds without much thought.

[yoandry]

Originally Posted by cubanbimmer3

Well, I bought the $25 Amazon tips.. initially just bought one set because I’m a genius. Then I ordered another set, and installed all four. 24 hours later and I’ve already lost one off the car 😂. So I just ordered an entire other set.

Am I doing something wrong?? I just threw them on in 20 seconds without much thought.

Yes, if you are Cuban as your tag said, seguro estoy que dejaste algo sin poner que sobraba y no hace falta, jaja tipico cubano.

[cubanbimmer3]

Originally Posted by yoandry

Yes, if you are Cuban as your tag said, seguro estoy que dejaste algo sin poner que sobraba y no hace falta, jaja tipico cubano.

Pero coño chico no había ningunas instrucciones! Nada más hice lo que a hecho toda la vida… nada más poner el típ

[yoandry]

Originally Posted by cubanbimmer3

Pero coño chico no había ningunas instrucciones! Nada más hice lo que a hecho toda la vida… nada más poner el típ

Ja

[PNWM50I]

I’m looking at the F95 Dinan system. For those who have posted here their custom tips…do you think there is room at the rear opening for the 4.5” tips the Dinan system uses? Is 4” pretty tight? Thanks!