|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
N55 JB4, Chargepipe, Downpipe FS
|
|
01-27-2015, 07:39 PM | #1 |
Private First Class
10
Rep 104
Posts |
N55 JB4, Chargepipe, Downpipe FS
Selling off parts from my LCI E82 2012 135i Coupe N55. Turned in lease, moved to F36 435i. Everything is about 3 years or 40k miles old. Make me an offer for one piece or everything. BurgerTuning JB4 Stage2 Harness B. Setup for ISO boost control. All connectors are solid, no broken tabs. Can include USB cable with a reasonable offer. http://www.burgertuning.com/N55_Stage2_Jb4.html Custom Performance Engineering CP-e chargepipe. Black anodized with hose clamps, ready for meth injection. One picture shows a slight modification that had to be done because I broke off one of the original screws in the mass airflow sensor boss. Worked fine, used a zip-tie and didn’t have to touch it for three years. MAF sensor isactually sealed and held in place by an o-ring, screws are just there for location. http://cp-e.com/webstore/product/bmw...ipe-methcharg/ iCarbon HFC Catted downpipe with thermal ceramic coating. Includes unused bombproof gaskets. When taken off the car, I noticed one of the cats inside has become loose. Shown in pictures. Allowed use of full JB4 Map 2 boost. No idea if it will pass emissions or throw a CEL. I went with a catted downpipe because the car was a daily driver and I did not want to smell the unburnt fuel. |
Bookmarks |
|
|